• 비파괴검사학회지
• /
• 제23권3호
• /
• pp.246-253
• /
• 2003

항공기 구조를 모사하여 일련의 리벳 구멍을 갖는 AA2024-T3 박판 구조를 대상으로 피로하중에 의한 단균열(short crack)의 발생시점과 성장거동을 음향방출(AE)을 위주로 한 측정으로 평가하였다. AE 위치표정에 의해 단균열의 좌표를 정확하게 결정하였으며, 이동식 현미경으로 균열의 크기를 측정하였다. 누적 AE 발생수 곡선은 단균열의 발생과 성장에 따라 일정한 간격을 두고 급격히 증가하는 양상을 보임으로써 여러 차례의 계단식 곡선을 형성하였다. AE 위치표정에서는 리벳 구멍을 중심으로 파괴역학에 근거한 관심영역(ROI)을 설정하였으며, 웨이블릿변환 잡음제거 방법을 사용하여 위치표정의 정확도를 향상할 수 있었다. 실제로 탐지된 신호의 대부분이 단 균열의 발생 및 성장과 관계없는 외부 잡음신호로 나타났으며, ROI 내에서 발생한 AE 발생원의 위치도 구조의 기하학적 특징이나 신호대잡음비의 영향에 의해 왜곡될 수 있음을 알 수 있었다.

• 비파괴검사학회지
• /
• 제28권4호
• /
• pp.315-322
• /
• 2008

발전소 밸브는 장시간 동안 고온고압하의 기혹한 조건으로 운전됨에 따라 밸브 시트(seat)면의 이물질 삽입, 시트의 균열, 스템(stem) 패킹(parking) 또는 용접부위 결함 및 피로균열 둥에 의해 누설손상이 발생하고 있다. 이러한 밸브 내부누설 상태를 정밀하게 진단하고 평가하기 위해서는 음향방출기술의 적용이 필요하며, 본 논문은 현장적용이 가능한 연구를 수행하고 그 결과를 소개하고자 한다. 또한 실제 발전소에서 운전되는 다양한 밸브 조건을 토대로 실험실 실험에 의해 주변잡음, 밸브누설시의 음향레벨 및 스펙트럼 특성을 분석하고, 발전소 현장실험 결과와의 비교분석을 통하여, 밸브 누설상태에 따른 주변잡음, 음향신호 및 측정 가능한 최소 누설검출량 등의 평가방법에 대해 고찰하였다. 실험실 실험 및 현장적용 연구결과로부터 밸브누설 여부를 포함한 상태 평가와 최소 측정가능 누설검출량 평가가 가능하였으며, 향후 본 연구는 발전설비 안전운전과 밸브누설로 인한 에너지 손실 예방에 크게 기여할 것으로 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1590-1597
• /
• 2007

This paper deals with the noise source localization of the Korean High Speed Train (KTX) at the speed of 300 km/h. Using Microfonarray system and beamforming technology typical pass-by noise sources and their frequency characteristics are investigated. It is primarily aimed at investigating the location and characteristics of the high speed train emission. The results from the microphone array tests are also analyzed in relation to the remarks from analytic studies and experimental investigations on the high speed train that have been done with the intention of understanding the interior noise mechanism. The acoustical image shows the low frequency noise sources mainly at the position of the under part of the train at high speeds and the related source mechanism are discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.737-740
• /
• 2002

Pressure fluctuation in the cylinder is one of the major sources on noise emission in oil hydraulic piston pumps. This paper reports an experimental study of pressure fluctuation characteristics in the cylinder of oil hydraulic piston pumps. We measured pressure fluctuation at BDC with delivery pressure, rotational speed. Because the pre-compression and the V-grooves in the valve plate is known of noise reduction, we investigated also the effect of pre-compression and V-grooves at the ends of the kidney ports with four types valve plates. We found that the pre-compression and the V-grooves in valve plate could reduce the noise of oil hydraulic piston pumps.

• Journal of the Optical Society of Korea
• /
• 제10권2호
• /
• pp.86-90
• /
• 2006

The external feedback effect on the relative intensity noise (RIN) characteristics of blue InAlGaN laser diode has been analyzed taking into account the spontaneous emission noise and the injection current for the high frequency modulation. A Langevin diffusion model was exploited to characterize its relative intensity noise. The simulation parameters were quantitatively evaluated from the optical gain properties of the InAlGaN multiple quantum well active regions by using the multiband Hamiltonian for the strained wurtzite crystals. The extracted parameters were then applied to the rate equations taking into account the external feedback and the high frequency modulation current. The RIN characteristics were investigated to optimize the low frequency laser diode noise characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.843-848
• /
• 2011

Planning and construction of railway for high speed trains up to 400 km/h are recently driven in Korea. High speed train is one of the environment-friendly fastest mass transportation means but its noise generated by rolling, traction and aerodynamic mechanism can cause public complaints of residents nearby railways. To cost-effectively prevent the troublesome noise in a railway planning stage, the rational railway noise prediction method considering the characteristics of trains as well as railway structures should be required but it is difficult to find authentic methods for Korean high speed trains such as KTX and KTX-II. In this study, we propose a framework of our own railway noise prediction model emitted by Korean high speed trains over 250 km/h based on the recent research results carried out in EU countries. The model considers railway sound power level using several point sources distributed in heights as well as tracks, whose detail speed- and frequency-dependent emission characteristics of Korean high speed trains should be determined in near future by measurement or numerical analysis. The attenuation during propagation outdoors is calculated by the well-known ISO 9613-2 and auxiliary methods to consider undulated terrain and wind effect.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.439-443
• /
• 2019

To improve the noise characteristics, software-based noise reduction algorithms are widely used in cadmium zinc telluride (CZT) pixelated semiconductor gamma camera system. The purpose of this study was to develop an improved median filtering algorithm using a thresholding method for noise reduction in a CZT pixelated semiconductor gamma camera system. The gamma camera system simulated is a CZT pixelated semiconductor detector with a pixel-matched parallel-hole collimator and the spatial resolution phatnom was designed with the Geant4 Application for Tomography Emission (GATE). In addition, a noise reduction algorithm with a median filter using an improved thresholding method is developed and we applied our proposed algorithm to an acquired spatial resolution phantom image. According to the results, the proposed median filter improved the noise characteristics compared to a conventional median filter. In particular, the average for normalized noise power spectrum, contrast to noise ratio, and coefficient of variation results using the proposed median filter were 10, 1.11, and 1.19 times better than results using conventional median filter, respectively. In conclusion, our results show that the proposed median filter using improved the thresholding method results in high imaging performance when applied in a CZT semiconductor gamma camera system.

• 한국방사선학회논문지
• /
• 제13권3호
• /
• pp.453-458
• /
• 2019

본 연구에서는 Geant4 application for tomographic emission (GATE) 시뮬레이션 프로그램을 통해 설계 된 male adult mesh (MASH) 팬텀의 영상을 획득한 후 다양한 필터링 인자가 설정된 FNLM 노이즈 제거 알고리즘을 적용함으로써 그에 따른 영상 특성의 경향성을 알아보고자 한다. 이를 위해 GATE 시뮬레이션 프로그램을 통해 인체를 모사할 수 있는 MASH 팬텀을 설계하였다. 또한, 설계된 MASH 팬텀을 기반으로 MATLAB 프로그램을 통해 복부영상을 획득한 후 0.005의 $\sigma$ 값을 갖는 Gaussian noise를 추가하여 열화영상을 모델링하였다. 모델링 된 열화영상으로부터 제안하는 FNLM 노이즈 제거 알고리즘의 필터링 인자를 각각 0.005, 0.01, 0.05, 0.1, 0.5, 1.0 으로 설정하여 적용하였으며, 정량적 평가를 위해 FNLM 노이즈 제거 알고리즘이 적용된 영상들로부터 각각의 coefficient of variation (COV), signal to noise ratio (SNR) 그리고 contrast to noise ratio (CNR)을 측정하였다. 결과적으로, 0.05의 필터링 인자가 적용된 영상에서 가장 개선된 COV, SNR 그리고 CNR 값을 보였다. 특히, COV는 설정된 필터링 인자가 증가함에 따라 감소하였으며, 0.05 값 이후부터 거의 일정한 값을 나타내었다. 또한, SNR 및 CNR의 경우 필터링 인자가 증가함에 따라 증가하였으며, 0.05 값 이후부터 감소하는 경향을 보였다. 결론적으로, 열화 영상으로부터 FNLM 노이즈 제거 알고리즘 적용 시 적합한 필터링 인자를 설정해야 함이 증명되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.85-88
• /
• 2000

We present a new approach to analyzing the dynamic false contour noise of AC plasma display panels (PDP), which is known to degrade the image quality severely. Compared with the existing methods that consider only the amount of light emission from PDP during 1 field time, the proposed approach uses the impulse response model of the human vision system and estimates how the human beings actually feel as the function of time. Experimental results using various benchmark sub-field scan algorithms are included.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1002-1006
• /
• 2000

It is diffuse sound field that measuring condition of absorption ratio and sound transmission loss for material consist of building are measured in reverberartion room and on-site. In this study, for upkeeping diffuse sound field in reverberation room, it is measured and etimated that sound field is effected according to sound source lacation and characteristics of emission directivity for sound source.