• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.121-133
• /
• 2013

Defect-free transfer service on the Next-generation wireless network extensive roaming mobile node (MN) to provide efficient mobility management has become very important. MIPv6(Mobility IPv6) is one of mobility management scheme proposed by IETF(Internet Engineering Task Force), and IPv6-based mobility management techniques have been developed in various forms. One of each management techniques, IPv6-based mobility management techniques for PMIPv6 (MIPv6) system to improve the performance of a variety of F-PMIPv6 (Fast Handover for Proxy MIPv6) is proposed. However, the F-PMIPv6 is cannot be excellent than PMIPv6 in all scenarios. Therefor, to select a proper mobility management scheme between PMIPv6 and F-PMIPv6 becomes an interesting issue, for its potenrials in enhancing the capacity and scalability of the system. In this paper, we develop an analytical model to analyze the applicability of PMIPv6 and F-PMIPv6. Based on this model, we design an Secure Smart Mobility Support(SSM) scheme that selects the better alternative between PMIPv6 and F-PMIPv6 for a user according to its changing mobility and service characteristics. When F-PMIPv6 is adopted, SSM chooses the best mobility anchor point and regional size to optimize the system performance. Numerical results illustrate the impact of some key parameters on the applicability of PMIPv6 and F-PMIPv6. Finally, SSM has proven even better result than PMIPv6 and F-PMIPv6.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3182-3194
• /
• 2000

It is strongly beliefed that Video on Demand(VOD) will become one of the most promising services in Broadband Integrated Services Digital Network(B-ISDN) for the nest generation VOD service can be classified into two types of services 'Near VOD(NVOD) and Interactive VOD(IVOD). For both services, some video servers should be installed at some nodes(especially, at the root node for NVOD service) in the tree structued VOD network,so that each node with video server stores video programs and distribules stored programs to customers. We consider thre kinds of cost.a program transmission cost, a program storage cost, and a video server installation cost. There exists a trade-off relationship among those three costs according to locationsl of video servers and the kinds of programs stord at each video server. Given a tree structured VOD network, and the total number of programs being served in the network, the resource allocation problem in a VOD network providing both IVOD and NVOD services is to determine where to install video servers for IVOD service, which and how many programs should be stored at each video server for both IVOD and NVOD services, so as to minunize the total cost which is the sum of three costs for both IVOD and NVOD services. In this paper we develop an efficient cynamic programming algorithm for solving the problem. We also implement the algorithm based on a service policy assumed in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3672-3679
• /
• 2012

Vehicle Ad hoc Network (VANET) is next-generation network technology to provide various services using V2V (Vehicle-to-Vehicle) and V2I (Vehicle-to-Infrastructure). In VANET, many researchers proposed various studies for the safety of drivers. In particular, using the emergency message to increase the efficiency of traffic safety have been actively studied. In order to efficiently transmit to moving vehicle, to send a quick message to as many nodes is very important via broadcasting belong to communication range of vehicle nodes. However, existing studies have suggested a message for transmission to the communication node through indiscriminate broadcasting and broadcast storm problems, thereby decreasing the overall performance has caused the problem. In addition, theses problems has decreasing performance of overall network in various form of road and high density of vehicle node as urban area. Therefore, this paper proposed Clustering based Routing Algorithm (CBRA) to efficiently transmit emergency message in high density of vehicle as urban area. The CBRA managed moving vehicle via clustering when vehicle transmit emergency messages. In addition, we resolve linkage problem between vehicles according to various form of road. The CBRA resolve link brokage problem according to various form of road as urban using clustering. In addition, we resolve broadcasting storm problem and improving efficacy using selection flooding method. simulation results using ns-2 revealed that the proposed CBRA performs much better than the existing routing protocols.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.401-407
• /
• 2019

SDN(Softeware Defined Networking) has emerged to address the rapidly growing demand for cloud computing and to support network virtualization services. Therefor many companies and organizations have taken SDN as a next-generation network technology. However, unlike the wired network where the SDN is originally designed, the SDN in the wireless network has a restriction that it can not provide the mobility of the node. In this paper, we extended existing openflow protocol of SDN and developed SDN-based network platform, which enables the SDN controller to manage the radio resources of its network and support the mobility of the nodes. The mobility support function of this paper has the advantage that a node in the network can move using its two or more wireless interfaces by using the radio resource management function of the SDN controller. In order to test the functions implemented in this paper, we measured parameters related to various transmission performance according to various mobile experiments, and compared parameters related to performance using one wireless interface and two interfaces. The SDN-based network platform proposed in this paper is expected to be able to monitor the resources of wireless networks and support the mobility of nodes in the SDN environment.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.413-416
• /
• 2019

Alstroemeria (Alstroemeriaceae) is one of the most important cut flowers in international market. Especially, characteristics like long vase-life, various colors, tolerance to low temperature and a low energy requirement during cultivation have stimulated this success. Because of its characteristics such as low multiplication rates, time-consuming process and high risk of carrying viral disease, in vitro propagation techniques based on rhizome meristems culture have been developing nowadays. The callus induction has various cultivation sites compared with the direct plant generation method, and if the callus is maintained well, the plant differentiation can be performed simultaneously while maintaining the callus, so that it can be used for mass proliferation. In this study, we tested various hormones and cultivars for efficient callus induction. As a result of culturing between the nodes and the internodes, the callus began to be formed after 8 weeks, and the calli incidence in the nodes was higher than that between the internodes. Also, in the comparison of 2,4-D and picloram, the callus incidence rate was up to 2 times higher in the medium treated with 2,4-D. Using these results, it is thought that it will help establish the system of mass propagation system of Alstroemeria and cultivate new varieties.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2009

Next generation mobile communication system will have various access networks and provide seamless multimedia data service to mobile nodes. The WiNGS system, one of these access network, has superior RAT(Radio Access Technology) and network connectivity other than previous ones. In this paper, we propose link-layer SR-ARQ between mobile node and WAGW to solve packet re-ordering problem during handover. In the proposed scheme, we apply the adaptive timer at the SR-ARQ sender to reduce unnecessary packet retransmission during handoff and delayed NAK algorithm at the SR-ARQ receiver for delaying NAK response due to temporary out-of-sequenced frames. We evaluate the performance of the proposed scheme by implementing the new SR-ARQ protocol at the link-layer using ns-2 simulator, and show the handover performance is improved greatly by preventing unnecessary retransmission.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.61-69
• /
• 2012

Smart Grid is the next-generation intelligent power grid that maximizes energy efficiency with the convergence of IT technologies and the existing power grid. Smart Grid is created solution for standardization and interoperability. Smart Grid industry enables consumers to check power rates in real time for active power consumption. It also enables suppliers to measure their expected power generation load, which stabilizes the operation of the power system. Smart industy was ecolved actively cause Wireless communication is being considered for AMI system and wireless communication using ZigBee sensor has been applied in various industly. In this paper, we proposed efficient addressing scheme for improving the performance of the routing algorithm using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm has wasted address space. Therefore proposing x, y coordinate axes from divide address space of 16 bit to solve this problem. Each node was reduced not only bitwise but also multi hop using the coordinate axes while routing than Cskip algorithm. I compared the performance between the standard and the proposed mechanism through the numerical analysis. Simulation verify performance about decrease averaging multi hop count that compare proposing algorithm and another. The numerical analysis results show that proposed algorithm reduce multi hop than ZigBee distributed address assignment and another.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.96-105
• /
• 1998

The aim of this paper is to propose the method of WDHMM(Weighted DHMM), using the MLP-VQ for the improvement of speaker-independent connect-digit recognition system. MLP neural-network output distribution shows a probability distribution that presents the degree of similarity between each pattern by the non-linear mapping among the input patterns and learning patterns. MLP-VQ is proposed in this paper. It generates codewords by using the output node index which can reach the highest level within MLP neural-network output distribution. Different from the old VQ, the true characteristics of this new MLP-VQ lie in that the degree of similarity between present input patterns and each learned class pattern could be reflected for the recognition model. WDHMM is also proposed. It can use the MLP neural-network output distribution as the way of weighing the symbol generation probability of DHMMs. This newly-suggested method could shorten the time of HMM parameter estimation and recognition. The reason is that it is not necessary to regard symbol generation probability as multi-dimensional normal distribution, as opposed to the old SCHMM. This could also improve the recognition ability by 14.7% higher than DHMM, owing to the increase of small caculation amount. Because it can reflect phone class relations to the recognition model. The result of my research shows that speaker-independent connected-digit recognition, using MLP-VQ and WDHMM, is 84.22%.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.385-392
• /
• 2013

The finite element method has become the most widely used method of structural analysis and recently, the method has often been applied to complex dynamic and nonlinear structural analyses problems. Even for these complex problems, where the responses are hard to predict, finite element analyses yield reliable results if appropriate element types and meshes are used. However, the dynamic and nonlinear behaviors of a structure often include large deformations in various portions of the structure and if the same mesh is used throughout the analysis, some elements may deform to shapes beyond the reliable limits; thus dynamically adapting finite element meshes are needed in order for the finite element analyses to be accurate. In addition, to satisfy the users requirement of quick real run time of finite element programs, the algorithms must be computationally efficient. This paper presents an adaptive finite element mesh generation scheme for dynamic analyses of structures that may adapt at each time step. Representative strain values are used for error estimates and combinations of the h-method(node movement) and the r-method(element division) are used for mesh refinements. A coefficient that depends on the shape of an element is used to limit overly distorted elements. A simple frame example shows the accuracy and computational efficiency of the scheme. The aim of the study is to outline the adaptive scheme and to demonstrate the potential use in general finite element analyses of dynamic and nonlinear structural problems commonly encountered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.817-825
• /
• 2013

The UHDTV system, which provides realistic service with ultra-high definite video and multi-channel audio, has been studied as a next generation broadcasting service. Since the conventional digital terrestrial transmission system is not capable to cover the increased transmission data rate of the UHDTV service, there are great necessity of researches about increase of data rate. Accordingly, the researches has been studied to increase the transmission data rate of the DVB-T2 system using dual-polarized MIMO technique and high order modulation. In order to optimize the MIMO DVB-T2 system where irregular LDPC codes are used, it is necessary to study the design of the bit mapper that matches the LDPC code and QAM symbols in MIMO channel. However, the research related to the design of the bit mapper has been limited to the SISO system. Therefore, this paper defines a new parameter that indicates the VND distribution of MIMO DVB-T2 system and performs the performance analysis according to the parameter which will be helpful for designing a MIMO bit mapper.