• Journal of Korean Society of Water and Wastewater
• /
• v.16 no.6
• /
• pp.726-732
• /
• 2002

Pressure drop could happen in the water distribution systems due to pipe breaks or maintenance. The pressure drop causes the water service shutdown and nodal water demands should be reduced in some areas. The conventional analysis method of water distribution systems can not consider the change of nodal water demands caused by these pressure drops. This study is to investigate the variation of nodal water demands according to the nodal water pressure and its effect on the analysis of water distribution systems. For these purpose, one real water service district was selected as a study area. As a result, nodal water demand patterns according to the water pressure could be suggested. Also, we could confirm that the suggested new analysis method for the water distribution systems which considering water pressure drops could be more reliable than the conventional method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.2
• /
• pp.101-108
• /
• 2016

In designing of the wind power facilities, the highest and lowest astronomical tides (HAT and LAT) are needed in terms of an international design tidal water levels. The AHHW and ALLW, however, have been used as the design tidal levels in Korea. The HAT and LAT in the Wido coastal sea should be estimated to satisfy the standard because the pilot wind power facilities will be located in the adjacent Wido coastal sea. In this study, the HAT and LAT are estimated using the 31-years hourly tidal elevation data of the Wido tidal gauging station and the nodal variation patterns of the major lunar components, such as $M_2$, $O_1$, and $K_1$, are analysed to check the expected long-term lunar cycle, i.e., 18.61-year's nodal variation patterns. The temporal amplitude variations of the $M_2$, $O_1$, and $K_1$ clearly show the 18.61-years periodic patterns in case of the no-nodal correction condition. In addition, the suggested HAT and LAT elevations, estimated as the upper and lower confidence limits of the yearly HAT and LAT elevations, show 40 cm greater than AHHW and 35 cm lower than ALLW, respectively.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.11
• /
• pp.479-486
• /
• 1986

It is necessary to consider a rotor movement in dynamic analysis on the flux distribution of electric machinery by FEM. Therefore, if air-gap domain was subdivided into triangular elements, computation results contain errors due to variation of element shape in air-gap because the nodal points corresponding to the rotor are displaced in analyzing domain for the time difference. In order to reduce this errors, the paper presents a application of a Macro Air-gap Element that interpolation function is obtained analytically and a means to join it with linear triangular elements in the rotating machine or in the linear machine. At the end of paper, setting up analytic domain model, it compares analytic solution with the computation results of Macro Air-gap Element appliction and that of linear triangular element subdivision only to each cases of nodal displacement. And it carries out that errors due to variation of element shape are reduced effectively by application of a Macro air-gap element.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.1
• /
• pp.85-94
• /
• 2018

For the design of wind-power facilities, the highest and lowest astronomical tides (HAT and LAT, respectively) are needed for the tidal-water levels regarding international designs; however, the approximate highest high water and approximate lowest low water AHHW and ALLW, respectively, have been used in Korea. The HAT and LAT in the wind-farm test-bed sea should be estimated to satisfy the international standard. In this study, the HAT and LAT are therefore estimated using the hourly tidal-elevation data of the Eocheongdo, Anmado, Younggwang, Gunsan, Janghang, and Seocheon tidal-gauging stations that are located in the adjacent coastal sea. The nodal variation patterns of the major lunar components, such as $M_2$, $O_1$, and $K_1$ are analyzed to check the expected long-term lunar cycle, i.e., 18.61 year's nodal-variation patterns. The temporal amplitude variations of the $M_2$, $O_1$, and $K_1$ clearly show the 18.61-years periodic patterns in the case of the no-nodal correction condition. In addition, the suggested HAT and LAT elevations, estimated as the upper and lower confidence limits of the yearly HAT and LAT elevations, are 50 cm greater than the AHHW and 40 cm lower than the ALLW, respectively.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1993.10a
• /
• pp.54-55
• /
• 1993

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1993.10a
• /
• pp.52-53
• /
• 1993

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.371-381
• /
• 1995

The effects of leaf and pod removal on variation of nodal sink components in determinate soybean [Glycine max (L.) Merr.] cultivar 'Danyeobkong' were measured at the experiment field of Chonbuk Provincial Rural Development Administration in 1991. Contrary to the conventional numbering system, node order in this experiment was numbered from top to bottom node. The leaves and pods of main stem from terminal to 5th node, below 6th node, or branches were removed at the growth stage of beginning pod(R3). In the leaf removal treatment, number and weight of pod and seed were highly decreased in upper part leaf removal, especially in removed part. In the pod removal treatment, number and weight of pod and seed were slightly increased in the other part. Cracked seed coat ratios were also high in the leaf removal treatment compared with control but low in the pod removal treatment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.6
• /
• pp.681-691
• /
• 2011

The size distributions of smoke particles from fire are prerequisite for the studies on fire detection and adverse health effects. Above the flame of the fire, coagulation dominates and the smoke particles grow from 1 to 50 nm up to 100 to 3,000 nm, sizes ranging from the free-molecular regime to the continuum regime. The characteristics of the agglomeration of the smoke particles are well known, independently for each of the free-molecular and continuum regimes. However, there are not many systematic studies in the entire regime by the complexity of the mechanisms. The purpose of this work is to find the characteristics of the development of the size distribution of smoke particles by agglomeration in the entire size range covering the free-molecular regime, via transition regime, to the near-continuum and continuum regime for each variation of parameters such as fractal dimension, primary particle size and dimensionless coagulation time. In this work, the dynamic equation for the discrete-size spectrum of the particles was solved using a nodal method based on the modification of a sectional method. In the calculation, the collision frequency function for the entire regime, which is derived by using the concept of collision volume and general enhancement function, was applied. The self-preserving size distribution for the entire regime is compared with the ones for the free-molecular or continuum regimes for each variation of the parameters.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.1
• /
• pp.87-96
• /
• 2013

This study investigated characteristics of buckling load and effective buckling length by member rigidity of dome-typed space frame which was sensitive to initial conditions. A critical point and a buckling load were computed by analyzing the eigenvalues and determinants of the tangential stiffness matrix. The hexagonal pyramid model and star dome were selected for the case study in order to examine the nodal buckling and member buckling in accordance with member rigidity. From the numerical results, an effective buckling length factor of adopted models was bigger than that of Euler buckling for the case of fixed boundary. These numerical models indicated that the influence of nodal buckling was greater than that of member buckling as member rigidity was higher. Besides, there was a tendency that the bifurcation appeared on the equilibrium path before limit point in the member buckling model.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.67-73
• /
• 1999

We constructed a class Ⅳ Flextensional transducer, and analyzed the effects of the variation in its material properties and structure on the resonance frequency of the transducer. We used the FEM for the analysis. Major axis length, minor axis length, thickness and material properties of the shell turned out to have large effects, while volume of the insert material, material properties and thickness of the ceramic bar have little. Thickness of the nodal-plate has no effect on the resonance frequency. Results of the present work can be utilized to design Class W Flextensional transducers of various resonance frequency.