• 한국포장학회지
• /
• 제5권2호
• /
• pp.17-23
• /
• 1999

Top-to-bottom compression strength of corrugated fiberboard boxes is partly dependent on the load-carrying ability of the central panel areas. The ability of these central areas to resist bending under load will increase the stacking strength of the box. The difference of box compression strengths, among boxes which are made with identical dimensions and fabricated with same components but different flute sizes, is primarily due to difference of the flexural stiffness of the box panels. Top-to-bottom compression strength of a box is accurately predicted by flexural stiffness measurements and the edge crush test of the combined boards. This study was rallied out to analyze the flexural stiffness, maximum bending force and maximum deflection for various corrugated fiber-boards by experimental investigation. There were significant differences between the machine direction (MD) and the cross-machine direction (CD) of corrugated fiberboards tested. It was about 50% in SW and DW, and $62%{\sim}74%$ in dual-medium corrugated fiberboards(e.g. DM, DMA and DMB), respectively. There were no significant differences of maximum deflection in machine direction among the tested fiberboards but, in cross direction, DM showed the highest value and followed by SW, DMA, DMB and DW in order. For the corrugated fiberboards tested, flexural stiffness in machine direction is about $29%{\sim}48%$ larger than cross direction, and difference of flexural stiffness between the two direction is the lowest in DMA and DMB.

• 한국농공학회지
• /
• 제34권3호
• /
• pp.53-63
• /
• 1992

To investgate the fracture behavior of the steel fiber reinforced concreate, the specimens with different steel fiber contents of 0.0%, 0.5%, 1.0%, 1.5%, were made and notched with differents notch depth ratios of 0.0,0.2, 0.4, 0.6, and the three point bend tests were followed. Test results of 16 different types of above combined specimens were summarized as follows. 1.The load line deflection contents were found to increase 5%, 16%, 19%, respectively, compared to the unnotched specimen with the increased of initial notch depth ratio to 0.2,0.4, 0.6, respectively. 2.The frexural strength were found to decrease 14%, 16%, 21 %, respectively, compared to the unnotched specimen with the increase of initial notch depth ratio to 0.2, 0.4, 0.6,respectively. 3.The stress intensity factors of the steel fiber reinforced concrete were found to increase 1.1 1.5 1.9 times, respectively, compared to the concrete with no steel fiber content with the increase of fiber content to 0.5%, 1.0%, 1.5%, respectively. 4.The influence of the mass of the steel fiber reinforced concrete to the whole fracture energy was found to be minor with 6~8 % contribution. 5.The fracture energy of the steel fiber reinforced concrete, considering the load-deflection curve and concrete mass was found to be approximately 350-380kg m/m$^2$. 6.The regression analysis through the relationship between the compressive(Oc)/tensile (OT) strength and fracture energy(Gf) showed that the fracture energy of the steel fiber reinforced concrete could be predicted as follows. Gf= 19.2662 Oc - 3940.4 Gf= 246.876 OT- 6008.8

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권3호
• /
• pp.1-9
• /
• 2014

본 연구에서는 기존 강재브레이스 내진보강법이 가지는 좌굴문제 등 단점을 극복할 수 있는 중 저층 철근콘크리트 건축물에 효과적으로 적용할 수 있는 새로운 내진보강법을 개발하였다. Carbon Fiber Composite Cable (CFCC)을 이용하여 건축물 골조 외부에 X자 형태로 내진보강을 실시하고, 상부 및 하부 보 양 단부에 CFCC X-브레이싱을 고정하기 위해서 평판 및 돌출형 나사식 접합으로 내진보강을 실시하는 내진보강법으로서, 반복하중 실험을 통하여 내진보강 효과를 규명하였다. 실험체는 비교용 비보강 골조, 평판형 및 돌출형 CFCC X-브레이싱 내진보강 골조 실험체 총 3개를 제작하였다. 실험결과, 본 연구에서 개발한 CFCC 내진보강법은 강도증진형 내진보강법으로 드러났으며, 기존 강재브레이스 보강법 대비 중량증가가 거의 없으며, 재료자체가 압축에 대한 좌굴이 없으며, 경량이므로 시공성이 매우 우수하고 중량 및 체적대비 우수한 강도가 발휘될 뿐만 아니라 특히, CFCC의 직경을 변경함으로서 내진보강 목적 (강도 보강량)에 대응하여 내진성능을 쉽게 변화시킬 수 있는 장점이 있다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.168-180
• /
• 2018

In order to achieve the high quality output voltage of single-phase voltage source inverters, in this paper an Adaptive Complementary Sliding Mode Control (ACSMC) is proposed. Firstly, the dynamics model of the single-phase inverter with lumped uncertainty including parameter variations and external disturbances is derived. Then, the conventional Sliding Mode Control (SMC) and Complementary Sliding Mode Control (CSMC) are introduced separately. However, when system parameters vary or external disturbance occurs, the controlling performance such as tracking error, response speed et al. always could not satisfy the requirements based on the SMC and CSMC methods. Consequently, an ACSMC is developed. The ACSMC is composed of a CSMC term, a compensating control term and a filter parameters estimator. The compensating control term is applied to compensate for the system uncertainties, the filter parameters estimator is used for on-line LC parameter estimation by the proposed adaptive law. The adaptive law is derived using the Lyapunov theorem to guarantee the closed-loop stability. In order to decrease the control system cost, an inductor current estimator is developed. Finally, the effectiveness of the proposed controller is validated through Matlab/Simulink and experiments on a prototype single-phase inverter test bed with a TMS320LF28335 DSP. The simulation and experimental results show that compared to the conventional SMC and CSMC, the proposed ACSMC control strategy achieves more excellent performance such as fast transient response, small steady-state error, and low total harmonic distortion no matter under load step change, nonlinear load with inductor parameter variation or external disturbance.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.171-174
• /
• 2006

A large number of service providers in countries all over the world have established GNSS reference station networks in the last years and are using network software today to provide a correction stream to the user as a routine service. In current GNSS network processing, all the geometric related information such as ionospheric free carrier phase ambiguities from all stations and satellites, tropospheric effects, orbit errors, receiver and satellite clock errors are estimated in one centralized Kalman filter. Although this approach provides an optimal solution to the estimation problem, however, the processing time increases cubically with the number of reference stations in the network. Until now one single Personal Computer with Pentium 3.06 GHz CPU can only process data from a network consisting of no more than 50 stations in real time. In order to process data for larger networks in real time and to lower the computational load, a federated filter approach can be considered. The main benefit of this approach is that each local filter runs with reduced number of states and the computation time for the whole system increases only linearly with the number of local sensors, thus significantly reduces the computational load compared to the centralized filter approach. This paper presents the technical aspect and performance analysis of the federated filter approach. Test results show that for a network of 100 reference stations, with the centralized approach, the network processing including ionospheric modeling and network ambiguity fixing needs approximately 60 hours to process 24 hours network data in a 3.06 GHz computer, which means it is impossible to run this network in real time. With the federated filter approach, only less than 1 hour is needed, 66 times faster than the centralized filter approach. The availability and reliability of network processing remain at the same high level.

• Geomechanics and Engineering
• /
• 제14권2호
• /
• pp.107-113
• /
• 2018

Coal samples with different joints morphology were subjected to uniaxial compression experiments, cracks evolution was recorded by Nikon D5300 and acoustic emission (AE) energy signals were collected by AEwin Test for Express-8.0. During loading process, coal samples deformed elastically with no obvious cracks changes, then they expanded gradually along the trace of the original cracks, accompanied by the formation of secondary cracks, and eventually produced a large-scale fracture. It was more interesting that the failure mode of samples were all shear shape, whatever the original cracks morphology was. With cracks and damage evolution, AE energy radiated regularly. At the early loading stage, micro damage and small scale fracture events only induced a few AE events with less energy, while large scale fracture leaded to a number of AE events with more energy at the later stage. Based on the multifractal theory, the multifractal spectrum could explain AE energy signals frequency responses and the causes of AE events with load. Multifractal spectrum width (${\Delta}{\alpha}$), could reflect the differences between the large and small AE energy signals. And another parameter (${\Delta}f$) could reflect the relationship between the frequency of the least and greatest signals in the AE energy time series. This research is helpful for us to understand cracks evolution and AE energy signals causes.

• 대한금속재료학회지
• /
• 제50권5호
• /
• pp.345-351
• /
• 2012

A three-point bending test was performed on roll-bonded Mg/Al/STS clad-metal plates under two different testing conditions (Mg layer in tension, or STS in tension) and their mechanical response and fracture behavior were investigated. Bending strength was found to be greater under the condition of Mg layer in tension. Heat treatment at $200^{\circ}C$ increased the bending formability, suggesting the interfacial strength increased at $200^{\circ}C$. Under the condition of Mg in tension, the clad heat-treated at $300^{\circ}C$ and $400^{\circ}C$ fractured in two steps, with the first step associated with the interfacial fracture between Mg and Al, and the second the fracture of the Mg layer. STS/Al layers were found to be bent without complete fracture. Under the condition of STS in tension, the clad heat-treated at $300^{\circ}C$ and $400^{\circ}C$ exhibited a very small load drop at the displacement, which is similar to that of the first load drop associated with the interfacial fracture under the condition of Mg in tension. In this case, no interfacial cracks were found and the complete cut-through fracture of clad was observed at low temperature heat treatment conditions, suggesting excellent interfacial strength. When the heat treatment temperature was higher than $300^{\circ}C$, interfacial cracks were observed. The local stress condition and the position of the interface with respect to the surface were found to have a great influence on the fracture behaviors of clad metals.

• Structural Monitoring and Maintenance
• /
• 제9권1호
• /
• pp.29-42
• /
• 2022

In mountainous areas of China, concrete poles with connectors are widely employed in power transmission due to its convenience of manufacture and transportation. The bearing capacity of the poles must have degenerated over time, and most of the steel connectors have been corroded. Carbon fiber reinforced polymer (CFRP) offers a durable, light-weight alternative in strengthening those poles that have served for many years. In this paper, the bearing capacity and failure mechanism of CFRP sheet strengthened existing reinforced concrete poles with corrosion steel connectors were investigated. Four poles were selected to conduct flexural capacity test. Two poles were strengthened by single-layer longitudinal CFRP sheet, one pole was strengthened by double-layer longitudinal CFRP sheets and the last specimen was not strengthened. Results indicate that the failure is mainly bond failure between concrete and the external CFRP sheet, and the specimens fail in a brittle pattern. The cross-sectional strains of specimens approximately follow the plane section assumption in the early stage of loading, but the strain in the tensile zone no longer conforms to this assumption when the load approaches the failure load. Also, bearing capacity and stiffness of the strengthened specimens are much larger than those without CFRP sheet. The bearing capacity, initial stiffness and elastic-plastic stiffness of specimen strengthened by double-layer CFRP are larger than those strengthened by single-layer CFRP. Weighting the cost-effective effect, it is more economical and reasonable to strengthen with single-layer CFRP sheet. The results can provide a reference to the same type of poles for strengthening design.

• 한국지반공학회논문집
• /
• 제18권2호
• /
• pp.147-160
• /
• 2002

우리나라 해양수산부(1999) $\ulcorner$항만 및 어항설계기준$\lrcorner$ 에서는 중력식 방파제 또는 중력식 안벽의 기초의 지지력 검토시 Bishop방법을 이용하여 기초의 지지력을 계산하는 것을 표준으로 규정하구 이 때 사석의 강도정수는 대형삼축압축시험을 이용하여 정하는 것이 가장 합리적이나 여러가지 여건상 시험이 불가능할 경우에는 일본 항만기술연구소의 $\ulcorner$항만기연자료 No. 699(水上, 1991)$\lrcorner$를 인용하여 암석의 일축압축강도가 300 kg/$cm^2$이상이면 점착력 0.2kg/$cm^2$, 내부마찰각 $35^{\circ}$$^{\circ}$는 기대할 수 있다는 결과를 인용.제시하고 있다. 그러나 이에 대한 국내의 어떠한 검증도 이루어지지 않았다. 본 연구에서는 비교적 일축압축강도가 작은 북제주 다공질 현무암 사석재를 대상으로 국내최초로 대형삼축압축시험(공시체직경: 30cm, 공시체높이: 60cm)을 실시하였다. 시험결과 북제주 현무암 사석재의 일축압축 강도가 400 kg/$cm^2$보다 클 경우 c=0.3kg/$cm^2,\phi=36^{\circ}$ 의 강도정수를 사용할 수 있음을 제안하고, 입자파쇄와 다이러턴시로 대표되는 사석재의 전단 특성에 대해서도 고찰하였다.

• 한국지반환경공학회 논문집
• /
• 제23권8호
• /
• pp.11-16
• /
• 2022

도로 건설 시에 진동 롤러를 활용한 다짐 과정은 토공에서 토양 강성을 높이는 데 필수적이다. 현재 다짐 작업 시 다짐 롤러의 운용방법에 대한 확실한 기준은 없는 실정이다. 간이 품질 검사 기법들이 개발되어 있지만, 현재 가장 많이 하는 품질검사 방법으로는 평판재하시험(PLT)과 현장밀도시험(FDT) 이 도로 건설 시에 다짐 정도를 평가하는 데 가장 많이 하는 시험법이다. 그러나 두 검사 방법 모두 시간적, 비용적인 이유로 모든 구간에서 품질 검사를 할 수 없어 효율이 떨어져 있는 실정이다. 본 연구에서는 진동 롤러의 운용 조건에 따라 다짐 품질에 어떤 영향을 미치는지 분석하였다. 모든 구간에서의 품질검사 결과를 취득하기 위해 현재 개발되어 상용화된 기술인 지능형 품질관리 시스템을 활용하였다. 시험 결과 다짐 롤러의 속도와 진동 방향에 따라 다짐도에 영향을 미치는 것으로 분석되었고, 다짐 방향에 따라서는 다짐도에 영향을 미치지 않는 것으로 나타났다.