• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.140-146
• /
• 1990

Polydimethylsiloxane(PDMS) containing [N, N'-bis (3- (salicylidene amino) propyl) amine Co(II)] (Co(saldpt)) as a fixed oxygen carrier was synthesized. UV-visible spectra of the membrane demonstrated that Co(saldpt) binded molecular oxygen specificaaly and reversibly. From time lag method experiment, it was found that both oxygen permeability and diffusibity increase with decreasing upstream pressure, while solubility maintain nearly constant. The maximum oxygen permeability and oxygen selectivity over nitrogen obtained was 18.6 barrer and 4, respectively, at 25 mmHg and $40^{\circ}C$ from the the PDMS membrane containing 1 wt% of Co(saldpt). Facilitation behavior was explained in terms of the dual sorption model.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.1
• /
• pp.43-50
• /
• 1997

The aim of the study is to describe the fate and transformation of nitrogen in grassland ecosystems. Field experiments were conducted using sandyloam soil under variabling conditions: Zen, fertilization, reduced slurry application(l20kg N $ha^{-1}\;yr^{-1}$), usual sluny application (240 kg N $ha^{-1}\;yr^{-1}$).Soil water samples were gathered with 120cm ceramic cups with initial pressure of 0.5 bar. Samples were collected twice a month and analysed for NO, colormetrically. Percolation was calculated as the difference between precipitation and potential evapotranspiration, and leaching as the product of percolation and nitrate content of the water h m the ceramic cups. The N$H_4$-N content in soil had no significant effect on slurry application, but high slurry application on grassland resulted in high N$O_3$-N content in soil. The NO, concentration in soil water was remarkably variable during the year. The average N$O_3$, concentration during experiment became the lowest(8.5 mg/e ) without slurry application and highest with 240kOa cattle sluny(25.3 mg4 ). For each of the three different amounts of cattle sluny applied (0, 120, and 240kOa), the amount of N$O_3$-N leached per year were 12, 23 and 29kg/ha respectively. On grassland under the climatic conditions of Allgau showed enormous nitrate leaching, which has a p a t potential of polluting the ground water. The high pool of mineral N in the soil are the source for N$O_3$ leaching. The leaching of N$O_3$ cannot be avoided completely, but minimized by optimizing N fertilization rate.

• Journal of Chest Surgery
• /
• v.45 no.4
• /
• pp.230-235
• /
• 2012

Background: Although patients with a ruptured abdominal aortic aneurysm (RAAA) often reach the hospital alive, the perioperative mortality is still very high. We retrospectively reviewed thirty patients who underwent repair of RAAA to identify the factors affecting postoperative mortality in a single hospital. Materials and Methods: Between September 2007 and May 2011, thirty patients with RAAA underwent emergent surgery (n=27) or endovascular aneurysm repair (n=3). Their medical records were retrospectively reviewed regarding three categories: 1) preoperative patient status: age, gender, vital signs, serum creatinine, blood urea nitrogen, hematocrit, and hemoglobin level: 2) aneurysmal status: size, type, and rupture status; and 3) operative factors: interval time to operating room, operative duration, and amount of perioperative transfusion. Results: The 30-day postoperative mortality rate was 13.3% (4/30); later mortality was 3.3% (1/30). On multivariate analysis, the initial diastolic blood pressure (BP), interval time to operating room and amount of preoperative packed cell transfusion were statistically significantly linked with postoperative mortality (p<0.05). Conclusion: In this study, preoperative diastolic BP, preoperative packed cell transfusion amount and interval time between arrival and entry to operating room were significantly associated with postoperative mortality. It is important to prevent hemorrhage as quickly as possible.

• Applied Science and Convergence Technology
• /
• v.25 no.1
• /
• pp.19-24
• /
• 2016

In this study, we evaluated the change of electronic structure during redox process in cerium-doped $ZrO_2$ grown by sol gel method. By sol-gel method, we could obtain cerium-doped $ZrO_2$ in high oxygen partial pressure and low temperature. After post annealing process in nitrogen ambient, the film is deoxidized. We used spectroscopic and theoretical methods to analysis change of electronic structure. X-ray absorption spectroscopy (XAS) for O K1-edge and Density Functional Theory (DFT) calculation using VASP code were performed to verify the electronic structure of the film. Also, high resolution x-ray photoelectron spectroscopy (HRXPS) for Ce 3d was carried out to confirm chemical bond of cerium doped $ZrO_2$. Through the investigation of the electronic structure, we verified as followings. (1) During reduction process, binding energy of oxygen is increase. Simultaneously, oxidation state of cerium was change to 4+ to 3+. (2) Cerium 4+ and cerium 3+ states were generated at different energy level. (3) Absorption states in O K edge were mainly originated by Ce 4+ $f_0$ and Ce 3+, while occupied states in valance band were mainly originated from Ce 4+ $f_2$.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.229-234
• /
• 2012

The existing permeability measurements based on pressure differential between the polymer membrane that is permeable to measure the amount of oxygen used, but these methods must be kept in a vacuum, and the measurement of the membrane with low permeability in the membrane is too time consuming. In recent years by using electrochemical method polymer membrane currents caused by the amount of oxygen is a measure of how much is used. In this study, apparatus consisting of one anode and six cathodes for multi-oxygen permeability tester used the same number of membranes produced by electrochemical oxygen permeation characteristics. In this study, one silver/silver chloride anode electrochemical method with a hexagonal sensor to put various kinds of polymer membranes with the six oxygen permeability for simultaneous measurement in real-time systems. Six cathodes (Pt), and one of the coil-shaped anode (Ag/AgCl) to form a hexagonal one of the polarographic oxygen sensor in a single measurement system by six sensors. Each sensor for making hexagonal specificity of the sensor to compensate for the conditions obtained in a pure nitrogen gas and pure oxygen gas conditions. With this study, self-developed hexagonal sensor capable of measuring sensors and oxygen permeability tester, for a multi-six different oxygen permeability characteristics of the membrane measured at the same time.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.780-787
• /
• 1989

The texturization properties of extrudate from isolated soybean protein and rice flour by extrusion cooking were investigated. The addition of up to 30% rice flur to isolated soy proetin could give more tenderness to the texturized extrudate. As the rice flour content increased, die temperature, nitrogen solubility index, and integrity index were decreased slightly with lower chewiness and gumminess. The water content of final extrudate was increased as the addition of rice flour increased, while density was maintained without variation, and rehydration ratio was decreased. The distribution of pressure profile during extrusion were in the range of $15-100kg/cm^3$. As the addition of rice flour increased, scanning electron micrographs demonstrated the gelatinized surface structure of rice starch and the increased air cell size of the testurized extrudate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.11
• /
• pp.1008-1015
• /
• 2015

Thermal vacuum test should be performed prior to launch to verify satellites' functionality in extremely cold/hot temperatures and vacuum conditions. A thermal vacuum chamber used to perform the thermal vacuum tests of a satellite system and its components. A cryogenic blower is a core component of the gaseous nitrogen (GN2) closed loop thermal control system for thermal vacuum chambers. A final goal of this research is development of cryogenic blower. Design requirements of a blower are 150 CFM flow rate, 0.5 bara pressure difference, hot and cold temperatures. This paper describes the performance analysis of impeller by 1D, CFD commercial software, the design of the thermal protection interface between the driving part and the fluid part. The performance of the cryogenic blower is confirmed by test at the standard air condition and is verified by on the thermal vacuum chamber at the real operating condition.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.23-29
• /
• 1990

The effect of a rapid freeze pretreatment of organic ion exchange resins on their grinding properties was studied. It was found that the structure of ion exchange resins was defected by freezing pressure formed in the process of rapid freezing. The defected resins didn't recover their own structure after thawing and those could be easy to be broken at room temperature by small force. Therefore, organic ion exchange resins could be ground readily at room temperature after rapid-freezing the fully swelled resins using by solid carbon dioxide, or liquid nitrogen. The rapid freeze pretreatment of cation exchange resins was very effective on grinding in particular. However, the effect of the pretreatment of anion exchange resins on grinding was less than that of cation exchange resins. In case of anion exchange resins, the ionic form of affected the grindability remarkably.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.386-391
• /
• 2014

Atmospheric-pressure nonthermal corona discharge plasma was applied to the sterilization of biologically contaminated scoria powder. Escherichia coli (E. coli) culture solution was uniformly sprayed throughout the scoria powder for artificial inoculation, which was well mixed to ensure uniformity of the batch. The effect of the key parameters such as discharge power, treatment time, type of gas and electrode distance on the sterilization efficiency was examined and discussed. The experimental results revealed that the plasma treatment was very effective for the sterilization of scoria powder; 5-min treatment at 15 W could sterilize more than 99.9% of E. coli inoculated into the scoria powder. Increasing the discharge power, treatment time or applied voltage led to an improvement in the sterilization efficiency. The effect of type of gas on the sterilization efficiency was in order of oxygen, synthetic air (20% oxygen) and nitrogen from high to low. The inactivation of E. coli under the influence of corona discharge plasma can be explained by cell membrane erosion or etching resulting from UV and reactive oxidizing species (oxygen radical, OH radical, ozone, etc.), and the destruction of E. coli cell membrane by the physical action of numerous corona streamers.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.5
• /
• pp.173-178
• /
• 2011

Separator of stack in polymer electrolyte membrane fuel cell (PEMFC) is high cost and heavy. If we make it low cost and lighter, it will have a great ripple. In this study, low carbon steel is used as base metal of separator because the cost of low carbon steel is very cheaper commercial metal material than stainless steels, which is widely used as separator. Low carbon steel has not a good corrosion resistance. In order to improve the corrosion resistance and electrolytic conductivity, low carbon steel needs to be surface treated. We made Chromium electroplated layer of $5{\mu}m$, $10{\mu}m$ thickness on the surface of low carbon steel and it was nitrided for 2 hours at $1000^{\circ}C$ in a furnace with 100 torr nitrogen gas pressure. Cross-sectional and surface microstructures of surface treated low carbon steel are investigated using SEM. And crystal structures are investigated by XRD. Interfacial contact resistance and corrosion tests were considered to simulate the internal operating conditions of PEMFC stack. The corrosion test was performed in 0.1 N $H_2SO_4$ + 2 ppm $F^-$ solution at $80^{\circ}C$. Throughout this research, we try to know that low carbon steel can be replaced stainless steel in separator of PEMFC.