• 제목/요약/키워드: Nitrogen analysis

검색결과 2,631건 처리시간 0.03초

황색종 잎담배의 숙도에 따른 화학성분의 변화연구 (Studies on the Change of Chemical Components of Flue-cured Tobacco with Maturity)

  • 황건중;김정환;김찬호
    • 한국연초학회지
    • /
    • 제3권1호
    • /
    • pp.20-24
    • /
    • 1981
  • This experiment was carried out to determine the relationships between maturity and content of the chemical components in flue-cured tobacco. The results were as follows : 1) Among the chemical components, the contents of total nitrogen, ammonia nitrogen, total alkaloids, nicotine, total volatile base, petroleum-ether extract, crude fiber, crude ash, water soluble ash, and chlorine decreased significantly, and those of total sugar, reducing sugar, and starch increased as leaf maturity progressed until the stage of ripeness, but, afterwards, a reverse tendency appeared. 2) There was a significant relationship between maturity and the contents of chemical components, such as total nitrogen, protein nitrogen, ammonia nitrogen, total volatile base, and the correlation coefficients of them were -0.743, -0.789, -0.797, and -0.642, respectively.

  • PDF

GC-FID/Methanizer를 이용한 고순도 질소의 순도분석법 개발 (Development of analysis method for high purity nitrogen using GC-FID/Methanizer)

  • 유제이;이진복;김진석;김운중;홍기룡
    • 분석과학
    • /
    • 제35권6호
    • /
    • pp.249-255
    • /
    • 2022
  • 본 연구에서는 기체 크로마토그래피-불꽃이온화검출기(GC-FID)를 이용한 고순도 질소의 새로운 순도분석법을 개발하였다. 고순도 질소에 존재할 수 있는 불순물인 일산화탄소(CO), 이산화탄소(CO2), 및 메탄(CH4)에 대한 3 µmol/mol 수준의 인증표준물질(Certified reference material, CRM)을 중량법을 이용하여 제조하였고, 이를 순도분석에 활용하였다. 개발된 순도분석법에서는 운반가스로 초고순도 질소와 순도분석 대상 질소를 사용하여, 제조된 인증표준물질의 기체 크로마토그래피에서 얻어지는 크로마토그램의 면적 값 차이를 비교함으로써 순도분석 대상 질소의 불순물을 정량 분석하였다. 순도분석 대상 질소로는 액체질소 및 제조사가 각기 다른 3곳의 고순도 질소를 사용하였다. 또한, 개발된 순도분석법의 유효성을 평가하기 위하여 순도분석 대상 질소 내 불순물의 물질량 분율을 기존 순도분석법과 비교하였다. 두 가지 순도분석법을 이용하였을 때 대상 질소 내 불순물의 물질량 분율이 불확도 (k = 2) 내에서 서로 일치함을 확인함으로써, 개발된 순도분석법이 유효함을 확인하였다.

손톱의 질소함량과 영양상태 (Nutritional Differences in Nitrogen Content of Fingernails)

  • 전영이;홍영숙;성낙응
    • Journal of Nutrition and Health
    • /
    • 제12권4호
    • /
    • pp.25-27
    • /
    • 1979
  • The analysis of nail nitrogen content reflected recent nutritional status. Therefore, estimation of nail nitrogen content has been previously reported in a small group of neonates ana school children. Nail samples were obtained from 52 economically middle and 21 low classes. The contents of nitrogen in their fingernails were determinded by micro-Kjeldahl method. Mean nail nitrogen content was $133.1{\pm}8mg/g$ in the middle class which is significantly higher than that of the low class $122.1{\pm}8mg/g$. The nitrogen contents of nails obtained in summer were found by analysis of variance and student's t-test to he lower than those obtained in winter.

  • PDF

고체 질소를 이용한 극저온 냉동의 해석 및 실험 (Analysis and Experiment on Cryogenic Refrigeration Using Solid Nitrogen)

  • 변정주;이윤숙;장호명
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제3권2호
    • /
    • pp.77-83
    • /
    • 2001
  • The thermal characteristics of solid nitrogen are investigated by experiment and analysis for the purpose of evaluating its feasibility as a cooling medium for HTS (high T$_{c}$ superconductor) magnets. A cryostat to refrigerate a liquid-nitrogen container well below its freezing temperature with a 2-stage GM cryocooler is designed and constructed. The spatial distribution of temperature is measure as a function of time during the freezing and melting processes. from which the thermal diffusivity of solid nitrogen can be approximately calculated. the freezing process is formulated and solved by the integral method with an assumption of phase equilibrium at the solid-liquid interface and experimental observation. It may be concluded that the thermal diffusion in solid phase is much slower than in liquid and the degree of super-saturation is quite severe in the solidification of nitrogen.n.

  • PDF

착상을 고려한 극저온 질소-대기 열교환기의 해석 (Analysis of a Cryogenic Nitrogen-Ambient Air Heat Exchanger Including Frost Formation)

  • 최권일;장호명
    • 설비공학논문집
    • /
    • 제12권9호
    • /
    • pp.825-834
    • /
    • 2000
  • A heat exchanger analysis is performed to investigate the heating characteristics of cryogenic nitrogen by ambient air for the purpose of cryogenic automotive propulsion. The heat exchanger is a concentric triple-passage for supercritical nitrogen, and the radial fins are attached on the outermost tube for the crossflow of ambient air. The temperature distribution is calculated for the nitrogen along the passage, including the real gas properties of nitrogen, the fluid convections and the conductions through the tube walls and the fins. Since the wall temperature of the outer (ambient side) tube is very low in most cases, a heavy frost can be formed on the surface, affecting the heat exchange performance. By the method of the similarity between the heat and the mass transfer of moist air, the frost growth and the time-dependent effectiveness of the heat exchanger are calculated for various operating conditions. It is concluded that the frost formation can augment the heating of nitrogen during the initial period because of the latent heat, then gradually degrades the heat exchange because of the increased thermal resistance. Practical design issues are discussed for the flow rate of nitrogen, the velocity and humidity of ambient air, and the sizes of the fin.

  • PDF

Nitrogen Doping in Polycrystalline Anatase TiO2 Ceramics by Atmosphere Controlled Firing

  • Chang, Myung Chul
    • 한국세라믹학회지
    • /
    • 제56권4호
    • /
    • pp.374-386
    • /
    • 2019
  • A process for nitrogen doping of TiO2 ceramics was developed, whereby polycrystalline titania particles were prepared at 450-1000℃ with variation of the firing schedule under N2 atmosphere. The effect of nitrogen doping on the polycrystallites was investigated by X-ray diffraction (XRD) and Raman analysis. The microstructure of the TiO2 ceramics changed with variation of the firing temperature and the firing atmosphere (N2 or O2). The microstructural changes in the nitrogen-doped TiO2 ceramics were closely related to changes in the Raman spectra. Within the evaluated temperature range, the nitrogen-doped titania ceramics comprised anatase and/or rutile phases, similar to those of titania ceramics fired in air. Infiltration of nitrogen gas into the titania ceramics was analyzed by Raman spectroscopy and XRD analysis, showing a considerable change in the profiles of the N2-doped TiO2 ceramics compared with those of the TiO2 ceramics fired under O2 atmosphere. The nitrogen doping in the anatase phase may produce active sites for photocatalysis in the visible and ultraviolet regions.

멀티스펙트랄 이미지 센서를 이용한 전자 지도 기반 변량 질소 살포 (Map-based Variable Rate Application of Nitrogen Using a Multi-Spectral Image Sensor)

  • 노현권
    • Journal of Biosystems Engineering
    • /
    • 제35권2호
    • /
    • pp.132-137
    • /
    • 2010
  • Site-specific N application for corn is one of the precision crop management. To implement the site-specific N application, various nitrogen stress sensing methods, including aerial image, tissue analysis, soil sampling analysis, and SPAD meter readings, have been used. Use of side-dressing, an efficient nitrogen application method than a uniform application in either late fall or early spring, relies mainly on the capability of nitrogen deficiency detection. This paper presents map-based variable rate nitrogen application based using a multi-spectral corn nitrogen deficiency(CND) sensor. This sensor assess the nitrogen stress by means of the estimated SPAD reading calculated from the corn leave reflectance. The estimated SPAD value from the CND sensor system and location information form DGPS of each field block was combined into the field map using a ArcView program. Then this map was converted into a raster file for a map-based variable rate application software. The relative SPAD (RSPAD = SPAD over reference SPAD) was investigated 2 weeks after the treatments. The results showed that the map-based variable rate application system was feasible.

Proteomic Comparison of Gibberella moniliformis in Limited-Nitrogen (Fumonisin-Inducing) and Excess-Nitrogen (Fumonisin-Repressing) Conditions

  • Choi, Yoon-E;Butchko, Robert A.E.;Shim, Won-Bo
    • Journal of Microbiology and Biotechnology
    • /
    • 제22권6호
    • /
    • pp.780-787
    • /
    • 2012
  • The maize pathogen Gibberella moniliformis produces fumonisins, a group of mycotoxins associated with several disorders in animals and humans, including cancer. The current focus of our research is to understand the regulatory mechanisms involved in fumonisin biosynthesis. In this study, we employed a proteomics approach to identify novel genes involved in the fumonisin biosynthesis under nitrogen stress. The combination of genome sequence, mutant strains, EST database, microarrays, and proteomics offers an opportunity to advance our understanding of this process. We investigated the response of the G. moniliformis proteome in limited nitrogen (N0, fumonisin-inducing) and excess nitrogen (N+, fumonisin-repressing) conditions by one- and two-dimensional electrophoresis. We selected 11 differentially expressed proteins, six from limited nitrogen conditions and five from excess nitrogen conditions, and determined the sequences by peptide mass fingerprinting and MS/MS spectrophotometry. Subsequently, we identified the EST sequences corresponding to the proteins and studied their expression profiles in different culture conditions. Through the comparative analysis of gene and protein expression data, we identified three candidate genes for functional analysis and our results provided valuable clues regarding the regulatory mechanisms of fumonisin biosynthesis.

온-라인 FIA시스템에 의한 돈육의 휘발성염기질소의 자동분석 -연구노트- (Automatic Analysis of Volatile Basic Nitrogen of Pork with an On-line Flow Injection Analysis System)

  • 이형춘
    • 한국식품영양과학회지
    • /
    • 제29권5호
    • /
    • pp.965-967
    • /
    • 2000
  • An on-line FIA system in place of traditional Conway method was used for quicker and simpler analysis of volatile basic nitrogen of pork. The on-line system was developed by connecting an FIA apparatus with an ammonia electrode as a detector to a personal computer. The data from Conway method and from the on-line FIA system were in good agreement and the correlation coefficient was 0.981. One sample could be analyzed in about 4 min.

  • PDF

액체질소 냉각용 극저온 열교환기의 최적설계를 위한 열전달 및 압력강하 특성 분석 (An Analysis of Heat Transfer and Pressure Drop Characteristics for Optimum Design of Cryogenic Heat Exchanger used for Liquid Nitrogen Cooling)

  • 고지운;전동순
    • 설비공학논문집
    • /
    • 제30권1호
    • /
    • pp.24-32
    • /
    • 2018
  • In this paper, analytical studies were conducted to obtain optimal design factors and analysis parameters of liquid nitrogen cooling exchanger applied in cryogenic refrigerator. The target value of heat transfer rate was more than 1 kW and pressure drop was less than 40 kPa. Design factors of cryogenic heat exchanger included width of channel and configuration of paths. Analytical factors of liquid nitrogen cooling exchanger included temperatures of coolant header surface and inlet liquid nitrogen. The width and number of channels in the design parameters were 0.0050~0.0150 m and 4~8, respectively. The configuration of channel path was 4 ways. Temperatures of coolant header surface and inlet liquid nitrogen in analytical parameters were 74 to 78K and 82 to 86K, respectively. As result, the design factor and analysis parameter satisfying the target values were obtained. The biggest heat transfer rate was 1.36 kW with pressure drop of 32.26 kPa.