• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.210.1-210.1
• /
• 2014

The hexagonal boron nitride (h-BN) sheet, a 2D material like graphene sheet, is comprised of boron and nitrogen atoms. Similar to graphene, h-BN sheet has attractive mechanical properties while it has a wide band gap unlike graphene. Recently, many experimental groups studied the growth of single BN layer by chemical vapor deposition (CVD) method on the copper substrate. To study the initial stage of h-BN growth on the copper surface, we have performed density functional theory calculations. We investigate several adsorption sites of a boron or nitride atom on the Cu surfaces. Then, by increasing the number of adsorbed B and N atoms, we study formation behaviors of the BN flakes on the surface. Several types of BN flakes atoms such as triangular, linear, and hexagonal shapes are considered on the copper surface. We find that the formation of the BN flake in triangular shape is most favorable on the surface. On the basis of the theoretical results, we discuss the growth mechanism of h-BN layer on the copper surfaces in terms of its shapes in the initial stage of growth.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.04a
• /
• pp.23-46
• /
• 2002

The cryogenic, pressure swing adsorption and membrane methods have been used to separate air into nitrogen and oxygen. The air separation membrane is made of the polymers, of which manufacturing process is complicate and it causes a little high production cost. Polymer membrane has temperature limit in usage and low durability even at moderate temperature. Therefore, inorganic membranes have been studied for years. As formation of unit alumino-silicate membrane, unit cells of membrane were made with a few coating methods. In this study the dipping of substrate into sols, application of vacuum to the opposite side of substrate with coating and rotating of the substrate in the sols were found as good coating memthods to make a uniform coating and to control the thickness of membrane. The membrane coats were examined by SEM and XRD. The sample ESZl-1 was compared with those of samples that prepared by another method. The present developed coating methods could be applied to the various types of zeolite membrane formation, that is A- X-, Y- ZSM- and MCM-types of membranes. Also these membrane forming methods could be applied to formation of catalyst absorbed zeolite membrane, of which zeolite absorb the catalytic metals. The product obtained from these coating methods could be applied to the industrial gas and liquid phase catalytic reaction and separation processes.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.373-379
• /
• 2009

Cesium carbonate was used as an adsorbent to capture carbon dioxide from gaseous stream of carbon dioxide, nitrogen, and moisture in a fixed-bed to obtain the breakthrough data of $CO_2$. The deactivation model in the non-catalytic heterogeneous reaction systems is used to analyze the sorption kinetics among carbon dioxide, carbonate, and moisture using the experimental breakthrough data. The experimental breakthrough data are fitted very well to the deactivation model than the adsorption isotherm models in the literature.

• Journal of Powder Materials
• /
• v.17 no.5
• /
• pp.379-384
• /
• 2010

In the present work, bismuth nanopowders with various particle size distributions were synthesized by controlling argon (Ar) gas flow rate and chamber pressure of a gas condensation (GC) apparatus. From the analyses of transmission electron microscopy (TEM) images and nitrogen gas adsorption results, it was found that as Ar gas flow rate increased, the specific surface area of bismuth increased and the average particles size decreased. On the other hand, as the chamber pressure increased, the specific surface area of bismuth decreased and the average particles size increased. The optimum gas flow rate and chamber pressure for the maximized electrochemical active surface area were determined to be 8 L/min and 50 torr, respectively. The bismuth nanopowders synthesized at the above condition exhibit 13.47 $m^2g^{-1}$ of specific surface area and 45.6 nm of average particles diameter.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.4
• /
• pp.65-70
• /
• 2006

Carbon nanotubes (CNT) grown by chemical vapor deposition (CVD) and plasma enhanced chemical vapor deposition (PECVD), and followed by annealing at $400{\sim}500^{\circ}C$ were investigated for gas sensing under 1.5ppm $NO_{2}$ concentration at an operating temperature of $200^{\circ}C$. The electrical resistance of CNT sensor decreased with temperature, indicating a semiconductor type. The resistance of CNT sensor decreased with $NO_{2}$ adsorption. It was found that the sensitivity of sensor was affected by humidity and decreased under microwave irradiation for 3 minutes. The CNT sensor grown by PECVD had a higher sensitivity than that of CVD.

• Macromolecular Research
• /
• v.13 no.6
• /
• pp.521-528
• /
• 2005

Electrospun polyacrylonitrile (PAN) nanofibers were carbonized with or without iron (III) acetylacetonate to induce catalytic graphitization within the range of 900-1,500$^{circ}C$, resulting in ultrafine carbon fibers with a diameter of about 90-300 nm. Their structural properties and morphologies were investigated. The carbon nanofibers (CNF) prepared without a catalyst showed amorphous structures and very low surface areas of 22-31 $m^{2}$/g. The carbonization in the presence of the catalyst produced graphite nanofibers (GNF). The hydrogen storage capacities of these CNF and GNF materials were evaluated through the gravimetric method using magnetic suspension balance (MSB) at room temperature and 100 bar. The CNFs showed hydrogen storage capacities which increased in the range of 0.16-0.50 wt$\%$ with increasing carbonization temperature. The hydrogen storage capacities of the GNFs with low surface areas of 60-253 $m^{2}$/g were 0.14-1.01 wt$\%$. Micropore and mesopore, as calculated using the nitrogen gas adsorption-desorption isotherms, were not the effective pore for hydrogen storage.

• Korean Membrane Journal
• /
• v.6 no.1
• /
• pp.16-23
• /
• 2004

The silica containing carbon (C-SiO$_2$) membranes were fabricated using poly(imide siloxane) (PIS) having -CO- swivel group. The characteristics of porous C-SiO$_2$ structures prepared by the pyrolysis of poly(imide siloxane) were related with the micro-phase separation between the imide block and the siloxane block. Furthermore, the nitrogen adsorption isotherms of the CMS and the C-SiO$_2$ membranes were investigated to define the characteristics of porous structures. The C-SiO$_2$ membranes derived from PIS showed the type IV isotherm and possessed the hysteresis loop, which was associated with the mesoporous carbon structures, while the CMS membranes derived from PI showed the type I isotherm. For the molecular sieving probe, the C-SiO$_2$ membranes pyrolyzed at 550, 600, and 700$^{\circ}C$ showed the O$_2$ permeability of 924, 1076, and 367 Barrer (1 ${\times}$ 10$\^$-10/㎤(STP)cm/$\textrm{cm}^2$$.$s$.$cmHg) and O$_2$/N$_2$ selectivity of 9, 8, and 12.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.509-512
• /
• 2008

The nitrogen adsorption method was used to evaluate the change fine pore structure of concrete under high temperature. The mechanical properties and chloride ion diffusion coefficient were also measured. Two dimension FEM model for the life expectancy of RC structure was built considering the effect of high temperature. The porosity under 0.01${\mu}m$ decreased in proportion to the temperature. However, that of $0.01{\mu}m{\sim}0.1{\mu}m$ increased. The strength decreased and the chloride ion diffusion coefficient increased in the temperature range of $200{\sim}600^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.504-509
• /
• 2013

In this study, ZnSe-$TiO_2$ composites were synthesized by a facile hydrothermal-assisted sol-gel process and characterized by nitrogen adsorption isotherms (77 K), X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, transmission electron microscopy (TEM) and UV-vis diffuse reflectance spectrophotometry. The photocatalytic activity was investigated by decoloration methylene blue (MB), methyl orange (MO), and rhodamine B (Rh.B) in an aqueous solution under visible light irradiation. The results revealed that the photocatalytic activity of the ZnSe-$TiO_2$ photocatalyst was much higher than that of pure$TiO_2$. The ZnSe nanoparticles, which act as a photosensitizer, not only extend the spectral response of $TiO_2$ to the visible region but also reduce charge recombinations.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1779-1783
• /
• 2004

In the present study, we carried out comparative research on the anthraquinones Raman spectrum and on the anthraquinones derivative 1,4-diamino-anthraquinone focusing on change in its intermediate in terms of pH and change in the substituent. WE use the SERS method and employ a silver sol prepared by Creighton et al.'s method. From the analysis of the UV spectrum of the mixture solution of 1,4-diamino-anthraquinone and silver sol, we could see that the 1,4-diamino-anthraquinone physically adsorbs silver sol. In terms of the adsorbing orientation, the adsorption of the nitrogen atom in the amino group is perpendicular to the surface of silver sol according to the surface selection rule. From the structure of the 1,4-diamino-anthraquinone intermediate according to the change of pH, we could see that the C=O bond is strengthened in the acidic state and weakened in the neutral and the alkaline state because of the resonance effect of the amines.