• 한국세라믹학회지
• /
• 제25권4호
• /
• pp.380-384
• /
• 1988

This investigation includes nitridation phenomena of silicon powder compacts in air. Nitridation reaction condition has been provided with using silicon nitride bed and active carbon additive. Reaction products are Oxynitride, $\alpha$-Si3N4, and $\beta$-Si3N4, Oxynitride(Si2N2O) phase in formed at outer surface layer ofsilicon powder compacts. $\alpha$-Si3N4, and $\beta$-Si3N4 are formed at inner region of powder compacts. Microstructural observation indicates that nitridation mechanism in this work is the same as conventional nitridation mechanism nitrogen gas.

• 전자공학회논문지D
• /
• 제34D권8호
• /
• pp.26-34
• /
• 1997

To develop ultrathin gate oxide for ULSI MOSFETs, for the first time, we fabricated MOS capacitors with 65.angs. thick initial oxide grown by high pressure oxidation (HIPOX) at 700.deg. C in 5 atmosphere $O_{2}$ ambient and then followed by rapid thermal nitridation (RTN) in N$_{2}$O ambient. The dielectric breakdown fields of the initial HIPOX oxide are 13.0 MV/cm and 13.8MV/cm for negative and positive gate bias, respectively and are dependent on nitridation temeprature and time.The lifetimes of the HIPOX oxides extractd by TDDB method are 1.1*10$^{8}$ sec and 3.4 * 10$^{9}$ sec for negative and positive stress current, respectively. The lifetime of the HIPOX oxide dfor negative stress current increases with nitridation time in N$_{2}$O ambient at 1100.deg.C, reaching maximum value stress curretn increases with nitridation time in N$_{2}$O ambient at 1100.deg. C reacing maximum value of 1.2*10$^{9}$ sec for 30 sec of nitridation time, and then subsequently decreases at the longer nitridation time. The lifetimes of the nitrided-HIPOX oxides are longer than 10 years when nitridations are carried out longer than about 50 sec and 12 sec at 1000.deg. C, and 1100.deg. C, respectively.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.157-162
• /
• 2010

Effect of starting SiC particle size on nitridation rate and flexural strength of $Si_3N_4$-bonded-SiC (SNBSC) ceramics was investigated by using SiC particles of different size (${\sim}200\;{\mu}m$, ${\sim}100\;{\mu}m$ and ${\sim}45\;{\mu}m$). The specimen prepared from smaller SiC particles resulted in higher nitridation rate after nitridation at $1450^{\circ}C$, owing to the lower packing density in green body. The flexural strength showed maxima after 1-h nitridation for all specimens and then decreased with prolonged nitridation because of local densification-induced pore coarsening. The specimen prepared from smaller SiC particles showed better flexural strength because of smaller pore size and partly higher nitridation rate in the specimen. A maximal flexural strength of 29 MPa was obtained in the specimen with a density of $2.04\;g{\cdot}cm^3$, which was prepared from $45\;{\mu}m$-SiC particles.

• 한국세라믹학회지
• /
• 제19권2호
• /
• pp.121-126
• /
• 1982

This paper deals with the $Si_3N_4$-bonded SiC refractory in terms of its microstructure development during nitridation. When mixture of SiC grains and fine Si power is fired under nitrogen atmosphere, an interlocking network of $Si_3N_4$ whiskers is formed by nitridation of Si. It is found that the strength of $Si_3N_4$-bonded SiC refractory is soley due to the physical nature of this interlocking whiskers. At the initial stage of nitridation, $Si_3N_4$ whisker forms in very thin and long shape and, with further nitridation, it becomes thicker with diameters up to 0.35$\mu\textrm{m}$. It is found that the mechanical strength of $Si_3N_4$-bonded SiC refractory depends on the degree of nitridation and the development of microstructure.

• 대한전자공학회논문지
• /
• 제27권5호
• /
• pp.709-715
• /
• 1990

SiO2 films were nitrided by tungsten-halogen heated rapid thermal annealing in ammonia gas at temperatures of 900-1100\ulcorner for 15-180sec. The nitroxide films were analyzed using Auger electron spectroscopy. MIS caapcitors were fabricated using these films as gate insulators. I-V and C-V characteristics of MIS capacitors were investigated. The AES depth profiles of nitroxide film show that the nitrogen rich layer is, at the early stage of nitridation, formed at the surface of nitroxide film and near the interface between nitroxide and silicon. Nitridation of SiO2 makes the film have a larger effective average refractive index. The thermal nitridation of SiO2 on silicon causes the flatband voltage shift due to the change of the fixed charge density. It is found that the dominant conduction mechanism in nitroxide is Fowler-Nordheim tunneling. Rapid thermal nitridation of 200\ulcornerSiO2 on silicon results in an improvement in the dielectric breakdown electric field.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.304.1-304.1
• /
• 2016

We have investigated the effect of plasma nitridation of atomic layer deposited-Al2O3 films of monocrystalline Si wafers and the thermal properties of nitridated Al2O3 films. Nitridation was performed on Al2O3 to form aluminum oxynitride (AlON) using NH3 plasma treatment in a plasma-enhanced chemical vapor deposition and it was conducted at temperature of $400^{\circ}C$ with various plasma power condition. After nitridation, we performed firing and forming gas annealing (FGA). For each step, we have observed the minority carrier lifetime and the implied Voc by using quasi-Steady-State photoconductance (QSSPC). We confirmed a tendency to increase the minority carrier lifetime and the implied Voc after the nitridation. On the other hand, the minority carrier lifetime and the implied Voc was decreased after Firing and forming gas annealing (FGA). To get more information, we studied properties of the plasma treated Al2O3 films by using Secondary Ion Mass Spectroscopy (SIMS) and X-ray Photoelectron Spectroscopy (XPS).

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1699-1705
• /
• 1989

Nitridation of about 300\ulcornerSiO2 filmss thermally grown on Si was performed in NH3 plasm ambient (0.2-2 torr) at 900\ulcornerC-1100\ulcorner for 15-20 minutes. The peoperties of those films have been investigated by analyzing the AES and the SIMS data, and the results of the I-V and the C-V measurements. At the plasma ambient of less than 1.5 torr pressure, etching of the films have been shown. Above the 1.5 torr pressure, however, SiO2 films were nitrided as SiIxNy. Plasma thermal nitridation of SiO2 by addition of small amount (6%) of CF4 to the NH3 showed higher pile-up N concentration in the surface region of SiOxNy film. The higher the nitridation temperature is and the longer the nitridation time is the larger the dielectric constant is. The plasma thermal nitridation of silicon dioxide on silicon causes the flat-band voltage shift based on the formation of the positive charge. The conduction mechanism for SiOxNy films could be elucidated by Fowler-Nordheim tnneling model. By SIMS analysis, surface of the film nitrided in plasma process has less contamination than that of the film nitrided in open-tube process.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.505-510
• /
• 2000

In this investigation, we fabricated RBSN (Reaction Bonded Silicon Nitride) using the static nitriding system which could be advantageous for commercialization. Firstly, Si compacts of different sizes were made, and then nitridation rates were investigated as a function of added static gas pressure. The reaction schedule was obtained by pre-experiments. In case of small samples, the variation of ${\alpha}$, ${\beta}$ phases between the inside and the outside region of the specimens was examined after the samples were nitrided under 1 bar and 1.5 bar reaction pressure. On the other hand, large samples of Si compact with the size of 36 mm for diameter and 23 mm for thickness were nitrided for 26 hours of the total nitridation time, which showed a complete and homogeneous nitriding reaction from the outside to the inside of the samples, although the time was considerably shorter than that needed for convertional nitridation. Nitridation rates obtained at the early stage of reaction were proportional to the reaction gas pressures. The sequences of the nitridation reaction with the thickness were as follows 1) the outside, 2) the inside and 3) the intermediate area of the specimen. These results wer eobtained from the coloration of cross sectioned specimens that had various nitridation rates. Total nitriding reaction kinetics was controlled by chemical reaction, not by diffusion of the nitrogen gas.

• 한국세라믹학회지
• /
• 제41권12호
• /
• pp.907-914
• /
• 2004

[ $Si-NaCl-NH_4Cl-NaN_3$ ]계에서 자전연소에 의한 Si의 질화반응기구에 대하여 알아보았다. 희석제로서 첨가된 NaCl은 질화반응 초기에 Si의 용융에 따른 Si의 성장을 억제하여 완전한 질화반응에 도움을 주는 것으로 나타났다. 또한 $NH_{4}Cl$과 $NaN_3$는 반응과정 동안 서로 분해하고 결합하여 생성물로서 NaCl을 형성하였고, 이 과정에서의 발열반응은 시편을 예열함으로써 질화반응에 도움을 주었다. 본 반응계에서 주된 질화반응기구는 액상-기상 반응기구였다. 그리고 ${\alpha}-Si_{3}N_4$의 제조를 위한 최적의 펠렛 기공도는 $67-69%\$였다.

• 대한전자공학회논문지
• /
• 제25권11호
• /
• pp.1358-1366
• /
• 1988

독립적인 nitridation step이 포함된 급속 열처리 공정을 이용하여 125-180A 두께의 이중 절연박막을 단결정 실리콘 상에 형성하였다. HCl 가스의 첨가량과 공정시간의 변화에 따른 박막 특성의 변화를 고찰하였고, 이에 따른 박막의 전기적 특성을 관찰하였다. HCl 가스의 첨가에 의해 초기의 산화막 두께의 성장은 현저하게 나타났으나, nitridation 후의 박막두께의 변화는 10A 이하로 매우 저조하였다. 이중 절연박막의 항복전압은 HCl 가스의 첨가량에 비례하여 점차 증가하였고, 절연강도는 furnace나 독립적인 nitridation step이 포함되지 않은 급속 열처리 공정으로 형성한 같은 두께의 박막에 비해 높은 것으로 분석되었다.