• Journal of Life Science
• /
• v.6 no.4
• /
• pp.270-277
• /
• 1996

Streptococcus sp J-C1 producing bacteriocin was isolated from Kimchi. The optimum conditions for bacteriocin production by Streptococcus sp. J-C1 were evaluated. For the maximum yield of bacteriocin production by Streptococcus sp. J-C1, the cell should be harvested at the late stationary phase and the temperature, pH and NaCl concentration should be 25$\circ$C, pH 8 and without the addition of NaCl, respectively. Sucrose should be used as a carbon source and organic nitrogen such as peptone should be used as a nitorgen source for the best yield. The production of bacteriocin is related to the cell growth of Streptococcus sp. J-C1. The bacteriocin from Streptococcus sp. J-C1 was active for gram positive microorganisms such as Lactobacillus sp., Leuconoctoc sp., Lactococcus sp., Streptococcus mutans, Staphylococcus aureus amd Bacillus subtilis and also active for gram negetive bacteria such as Acetobacter aceti. Antibacterial activity of the bacteriocin was completely disappeared by protease treatment.

• Journal of Surface Science and Engineering
• /
• v.9 no.2
• /
• pp.1-7
• /
• 1976

The dissolving and growth kinetics of intermetallic compounds for the reaction between solid iron and molten zinc were studied under nitorgen atmosphere over the temperature range between470$^{\circ}C$ and 680$^{\circ}C$. The rates of dissolution of solid iron into molten zinc were obtained under a static conditon, The amount of dissolution of sold iron and the growth of intermetalic compounds could be determined by means of microscopy. The thickness of intermetallic compound at a given temperature increases with increasing time, whereas for a given time decreases with increasing temperature . The rate of dissolution is controlled by the diffusion process of iron in the effective boundary layer of molten zinc over the temperature range 470$^{\circ}$-530$^{\circ}C$, 570$^{\circ}$-620$^{\circ}C$, and 650$^{\circ}$-665$^{\circ}C$, while by the surface reaction over the range 530$^{\circ}$-570$^{\circ}C$ and 620$^{\circ}$-650$^{\circ}C$.

• Korean Journal of Veterinary Research
• /
• v.33 no.2
• /
• pp.285-287
• /
• 1993

Toxoplasma gondii frozen by the method of very slow cooling ($-30^{\circ}C/3hrs.{\rightarrow}\;-60^{\circ}C/lhr.{\rightarrow}\;-196^{\circ}C$ of liquid nitrogen)were inoculated mice after storage in the liquid nitrogen for 5 years. The results obtained were as follows; 1. Toxoplasma gondii was detected in mice 4~5th day after intraperitoneal inoculation of organisms stored in the liquid nitrogen once a year for 5 years. 2. Toxoplasma gondii could be preserved longer than 5 years in liquid nitorgen being evidenced by the in vivo test.

• Corrosion Science and Technology
• /
• v.2 no.5
• /
• pp.233-237
• /
• 2003

Pickling inhibitors can be used to form an adsorbed layer on the metal surface to hinder the discharge of H^+$ and dissolution of metal ions. Nitrogen-containing inhibitors were selected as corrosion inhibitors for mild steel (MS) in pickling acid process. In this study, the addition of inhibitor, the pickling temperatures and the pickling times were the parameters to investigate the effects on the inhibition efficiency (IE) for MS by using weight loss measurement. Preliminary results show that the IE increased with the increase in pickling time from 10 minutes to 60 minutes, and the IE also increased with the increase in temperature at room temperature and $40^{\circ}C$. At the higher temperature. the IE values are higher and almost independent with the pickling time. Furthermore, the potentiodynamic polarization, open circuit corrosion potential-time and corrosion current-time studies show that nitorgen-containing inhibitor behaves predominantly as cathodic polarization. The roughness test and SEM investigation are also studied in this paper.

• The Korean Journal of Ecology
• /
• v.7 no.3
• /
• pp.170-176
• /
• 1983

The results obtained from the experiments conducted to investigate Cruciferae plants in rape dependent on the amount of applied fertilizer in aspects of mineral nutrient uptake and on the effects of the composition of oil quality are as follows: Absorption of mineral nutrients in the respective pars of the plant body was high in nitorgen in the order of leaf and stem

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.49-58
• /
• 1994

A study on the performance of a Diesel engine with various intake gas compositions other than that of air are performed experimentally. In this study, the concentrations of each of oxygen, nitorgen, carbon dioxide, and argon are changed and their effects on the performance of the engine are investigated parametrically. The experiments are performed at constant engine speed condition, and main measured parameters are cylinder pressure, intake gas compositions, fuel consumption rate. Increase of oxygen concentration up to 24% improved the performance of the engine generally. The adverse effect was observed when the oxygen concentration was increased over 24%. Increase of carbon dioxide concentration degraded the performance of the engine, mainly due to the lower specific heat ratio of carbon dioxide. Adding argon gas to the intake gas improved the overall performance. Finally, it is found that two most influencing factors affecting the performance of the Diesel engine in this study of intake gas composition variation are ignition delay and specific heat ratio of the intake gas.

• The Korean Journal of Ecology
• /
• v.6 no.2
• /
• pp.98-105
• /
• 1983

This study was carried out to investigate the effects of Zn and Pb concentration on seed germination and plant growth in water and soil culture, and the frequency of chlorosis invegetation and the relationship between plants and soil in the Sambo mine. The inhibition of germination were observed in 1000ppm of Zn, 10ppm of Pb and 5000ppm of Zn + Pb, but germination was more stimulated in 10ppm of Zn than control. The symptoms of chlorosis and abnormality were occurred in plant leaves grown to the soils treated with more than 1000ppm of Pb. Reasons of chlorosis were considered as an antagonistic effect of other metals towards uptake of iron by the plant in Zn treatment. The contents of Zn and Pb in fruits were lower than those of leaves, and that was remarked in case of Pb. With increasing rate of Zn and Pb treatment, chemical components of soils in pot culture were accompanied by slight decrease in pH, total nitorgen and exchangeable K. Chlorotic individuals of 10 species were shown in the areas of the Sambo mine. Chlorotic symptoms were especially extensive and severe in Sophora angustifolia, Populus alba, Spiraea prunifolia, Amorpha fruticota, Lespedeza bicolor and Salix dependens. Plants in the investigated areas grew in soils containing Zn of 311ppm and Pb of 151ppm on an average, and accumulated Zn of 2084ppm and Pb of 49ppm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.38-40
• /
• 1988

This paper was a study on dielectic characteristics of polypropylen film which were annealled in air and qunched in nitorgen after aging for 5[Hr]. Dielectric characteristics of specimen were measured in temperature of the range of 15-120[$^{\circ}C$], and in frequency of the range of $30-1{\times}10^6$[Hz.] As the result, for dielectric relaxation $\beta$-peak was observed in 20[$^{\circ}C$], and $\alpha$-peak was observed in 90[$^{\circ}C$]. Also, it was explained that $\alpha$-peak attributed due to armorphous region and $\beta$-peak attributed due to crystalline region and activation energy from dielectric loss spectra was obtained 34.5[kcal/mole] for $\alpha$-peak and 80.5[Kcal/mole] for $\beta$-peak, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.41-41
• /
• 2011

Flash memory에서 tunnel oxide film은 electron tunnelling 현상을 이용하여 gate에 전하를 전달하는 통로로 사용되고 있다. 특히, tunnel oxide film 내부의 charge trap 현상과 불순물이 소자 특성에 직접적인 영향을 주고 있어, 후속 N2O/NO 열처리 공정에서 SiO2/Si 계면에 nitrogen을 주입하여 tunnel oxide film 특성을 개선하고 있다. 따라서 N2O/NO 열처리 공정 최적화를 위해서는 tunnel oxide film 내 N 농도와 분포에 대한 정확한 평가가 필수적이다[1]. 본 실험에서는 low energy magnetic SIMS를 이용하여 N2O로 열처리된 tunnel oxide film 내의 N농도를 보다 정확하게 평가하고자 하였다. 사용된 시료는 Si substrate에 oxidation 이후 N2O 열처리를 진행하여 tunnel oxide를 형성시켰으며, 분석 impact energy는 surface effect최소화와 최상의 depth resolution 확보를 위해 250eV를 사용하였으며, matrix effect와 mass interference를 방지하기 위해 MCs+ cluster mode[2]로 CsN signal를 검출하였다. 실험 결과, 특정 primary beam 입사각도에서 nitrogen depth resolution 저하 현상이 발생하였고, SIMS crater 표면이 매우 거칠게 나타났다. 이에, Depth resolution 저하 현상을 개선하기 위해 극한의 glancing 입사각 조건으로 secondary extraction voltage 변화를 통해 depth resolution이 개선되는 최적의 impact energy와 primary beam 입사각 조건을 확보하였다. 그 결과 nitrogen의 depth resolution은 1.6nm의 depth resolution을 확보하였으며, 보다 정확한 N 농도와 분포를 평가할 수 있게 되었다.

• Journal of Welding and Joining
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2000

The purpose of the present study was to investigate weld metallurgical phenomena such as primary solidification mode, microstructural evolution and hot cracking susceptibility in nitrogen-bearing austenitic stainless steel GTA welds. Eight experimental heats varying nitrogen content from 0.007 to 0.23 wt.% were used in this study. Autogenous GTA welding was performed on weld coupons and the primary solidification mode and their microstructural characteristics were investigated from the fusion welds. Varestraint test was employed to evaluate the solidification cracking susceptibility of the heats and TCL(Total Crack Length) was used as cracking susceptibility index. The solidification mode shifted from primary ferrite to primary austenite with an increase in nitrogen content. Retained delta ferrite exhibited a variety of morphology as nitrogen content varied. The weld fusion zone exhibited duplex structure(austenite+ferrite) at nitrogen contents less than 0.10 wt.% but fully austenitic structure at nitrogen contents more than 0.20 wt.%. The weld fusion zone in alloys with about 0.15 wt.% nitrogen experienced primary austenite + primary ferrite solidification (mode AF) and contained delta ferrite less than 1% at room temperature. Regarding to solidification cracking susceptibility, the welds with fully austenitic structure exhibited high cracking susceptibility while those with duplex structure low susceptibility. The cracking susceptibility increased slowly with an increase in nitrogen content up to 0.20 wt.% but sharply as nitrogen content exceeded 0.20 wt.%, which was attributed to solidification mode shift fro primary ferrite to primary austenite single phase solidification.