• 제목/요약/키워드: Nickel catalyst

검색결과 195건 처리시간 0.028초

니켈로 코팅된 염가금속을 이용한 4-염화페놀의 환원제거율 평가 (Reductive Degradation of 4-Chlorophenol Compound by Nickel-Coated Zero Valent Iron)

  • 신승철;김영훈;고석오
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제11권3호
    • /
    • pp.59-65
    • /
    • 2006
  • 본 연구에서는 지하수내의 클로로페놀 오염물을 제거하기 위하여 니켈로 코팅된 영가철을 이용한 기술의 적용 타당성을 검토하였다. 영가철을 니켈로 개질하여 4-클로로페놀을 분해하였으며 중간 생성불의 생성에 대하여 조사하였다. 또한, 초기 오염물의 농도, 이중금속의 주입량, 휴믹산의 영향 및 용액의 pH 변화에 따른 오염물의 제거 효과에 대한 영향을 분석하였다. 니켈로 개질된 영가철은 240분 이내에 4-클로로페놀의 95% 이상을 효과적으로 제거하였다. 유사 1차 반응계수에 의하여 평가된 오염물의 제거효과는 개질된 영가철의 주입량에 직접적으로 비례하는 결과를 보였다. 휴믹산의 경우 개질된 영가철의 표면에 대하여 4-클로로페놀과 경쟁관계를 보임에 따라 오염물의 제거효과를 감소하는 역할을 하였다. 영가철만을 단독으로 사용하는 경우와 다르게 개질된 영가철을 사용 시 용액의 pH 는 크게 변화하지 않아 개질된 금속의 내구연한이 증가될 수 있음을 보여주었다. 4-클로로페놀의 탈염소화 분해과정을 해석한 결과 페놀화합물이 생성되었다.

이민에 기초한 질소주개 리간드의 전이금속 착물 합성, 화학적 특성 및 촉매활성 (Synthesis, Chemical Characterization and Catalytic Activity of Transition Metal Complexes Having Imine Based Nitrogen Donor Ligand)

  • Hussain, Raja Azadar;Badshah, Amin;Asma, Maliha
    • 대한화학회지
    • /
    • 제54권1호
    • /
    • pp.23-26
    • /
    • 2010
  • Schiff 리간드인 (Z)-N-((Z)-2-(sec-butylimino)-1,2-diphenylethylidene)butan-2-amine을 벤질과 sec-부틸아민과의 축합반응에 의해 합성하였다. 일 주기 전이금속인 망간(II) 및 니켈(II)과 리간드와의 착물반응을 시도하였다. 리간드 및 착물의 특성을 FTIR, 원소분석 및 열무게분석으로 고체 상태에서, 그리고 NMR ($^1H,\;^{13}C$)로 용액 상태에서의 각각 조사하였다. 두 착물 모두 온화한 조건에서 methylaluminoxane (MAO) 존재 하에 부타디엔 올리고화 반응의 조촉매로 좋은 촉매활성을 보였다.

Large-scale synthesis of the carbon coils using stainless steel substrate

  • Jeon, Young-Chul;Kim, Sung-Hoon
    • 한국결정성장학회지
    • /
    • 제23권6호
    • /
    • pp.296-301
    • /
    • 2013
  • Carbon coils could be synthesized using $C_2H_2/H_2$ as source gases and $SF_6$ as an incorporated additive gas under the thermal chemical vapor deposition system. A 304-type stainless steel was used as a substrate with nickel powders as the catalyst. The surface of the substrate was pretreated using a sand paper or a mechanical drill to enhance the production yield of the carbon coils. The characteristics of the deposited carbon nanomaterials on the substrates were investigated according to the surface state on the stainless steel substrate. The protrusion induced by the grooves on the substrate surface could enhance the formation of the carbon nanomaterials having the coils geometries. The cause for the enhancement of the carbon coils formation by the grooves was suggested and discussed with the surface energies for the interaction between as-growing carbon elements. Finally, we could obtain the massive production yield of the carbon coils by the surface pretreatment using SiC sand papers on the several tens grooved stainless steel substrate.

메탈나이트레이트가 도포된 기판과 C2H4 역확산화염을 이용한 탄소나노튜브 및 탄소나노섬유의 합성 (Synthesis of Carbon Nanotubes and Nanofibers on a Substrate Coated with Metal Nitrates using an C2H4 Inverse Diffusion Flame)

  • 이교우;정종수;황정호
    • 대한기계학회논문집B
    • /
    • 제27권10호
    • /
    • pp.1480-1488
    • /
    • 2003
  • Synthesis of carbon nanomaterials on a substrate coated with metal nitrates using an ethylene fueled inverse diffusion flame was illustrated. The effects of radial distance, residence time of the substrate, and hydrocarbon composition on the synthesis of carbon nanomaterials were investigated. The effects of catalyst metal particles were also studied using SUS304 substrates coated with Fe(NO$_3$)$_3$ (ferric nitrate, nonahydrate) and Ni(NO$_3$)$_2$(nickel nitrate, hexahydrate), and Cu substrate. Carbon nanomaterials, with diameters ranging from 30 - 70 nm, were observed on the substrate for both cases of using substrates only and using them with metal nitrates. In case of using the substrate with metal nitrates, the formation and growth of carbon nanomaterials were occurred in the lower temperature region than that of using the substrates only due to the easy activation of the metal particles coated on the surface of the substrates.

Improved high-performance La0.7Sr0.3MxFe1-xO3 (M = Cu, Cr, Ni) perovskite catalysts for ortho-para hydrogen spin conversion

  • Choi, Jeong-Gil;Choi, Euiji;Kweon, Soon-Cheol;Oh, In-Hwan
    • 한국결정성장학회지
    • /
    • 제28권1호
    • /
    • pp.44-50
    • /
    • 2018
  • The improved high-performance Fe-based perovskite-type oxides ($La_{0.7}Sr_{0.3}M_xFe_{1-x}O_3$, M = Cu, Cr, Ni) were synthesized by a citrate method and characterized by SEM, EDS, XRD and NMR spectroscopy analyses. The characterization analyses revealed that the stoichiometric amounts of lattice oxygen were existed in all of perovskite samples except for a nickel-doped perovskite. Fe-based perovskites exhibited a surprising result for ortho-para $H_2$ spin conversion reaction, indicating two orders of magnitude higher conversions and conversion rates than commercial $Fe_2O_3$. It was considered that this conversion difference might be attributed to the presence of oxygen vacancies in Fe-based perovskites prepared in this study.

다공성 금속 촉매를 이용한 메틸사이클로헥산의 탈수소 반응 (Dehydrogenation of methylcyclohexane over porous metals)

  • 김종팔
    • 한국수소및신에너지학회논문집
    • /
    • 제15권2호
    • /
    • pp.152-158
    • /
    • 2004
  • Hydrogen has been considered as an important and essential future energy source. But the storage of the hydrogen is a difficult problem and many studies were focused on this matter. However, the MTH-system (methylcyclohexane, toluene, hydrogen) was proposed for storage of hydrogen by Taube et al. and that is the reaction of hydrogen with toluene to give methylcyclohexane. One toluene molecule can store six hydrogen atoms to form methylcyclohexane. In this form the hydrogen can be easily stored in liquid organic hydrides and transported at ambient pressure in tanks. Hence, this study is focused on the catalytic dehydrogenation of methylcyclohexane. Since supported platinum and nickel were employed as catalysts in literature, in this study, porous Pt and Ni were prepared and tested for the dehydrogenation reaction. When the porous Pt catalyst was applied to the dehydrogenation it showed higher activity in the reaction and higher selectivity to toluene. Specially at higher pressure, it showed almost 100 % conversion and 100 % selectivity and hence porous platinum could be considered as best for the given reaction.

Hot-filament 플라즈마화학기상증착법 이용한 패턴된 DLC층 위에 탄소나노튜브의 선택적 배열

  • 최은창;박용섭;홍병유
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.293-293
    • /
    • 2010
  • Carbon nanotubes (CNTs) have attracted considerable attention as possible routes to device miniaturization due to their excellent mechanical, thermal, and electronic properties. These properties show great potential for devices such as field emission displays, CNT based transistors, and bio-sensors. The metals such as nickel, cobalt, gold, iron, platinum, and palladium are used as the catalysts for the CNT growth. In this study, diamond-like carbon (DLC) was used for CNT growth as a nonmetallic catalyst layer. DLC films were deposited by a radio frequency (RF) plasma-enhanced chemical vapor deposition (RF-PECVD) method with a mixture of methane and hydrogen gases. CNTs were synthesized by a hot filament plasma-enhanced chemical vapor deposition (HF-PECVD) method with ammonia (NH3) as a pretreatment gas and acetylene (C2H2) as a carbon source gas. The grown CNTs and the pretreated DLC filmswere observed using field emission scanning electron microscopy (FE-SEM) measurement, and the structure of the grown CNTs was analyzed by high resolution transmission scanning electron microscopy (HR-TEM). Also, using energy dispersive spectroscopy (EDS) measurement, we confirmed that only the carbon component remained on the substrate.

  • PDF

균일용액 침전법을 이용한 내부개질촉매 개발에 대한 연구 (Development of Internal Reforming Catalysts using Homogeneous Precipitation)

  • 정유식;이영우;구기영;정운호;윤왕래;서용석
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 추계학술대회 논문집
    • /
    • pp.199-202
    • /
    • 2009
  • 본 연구에서는 내부 개질반응에서 사용되는 고함량의 니켈촉매(Ni/Al2O3계열 촉매)제조를 위해, 요소(urea)를 이용한 균일용액 침전법을 이용하여 니켈이 고분산된 52wt% Ni/$Al_2O_3$ 촉매를 제조하였다. 제조 촉매는 BET 표면적, 니켈분산도, 니켈표면적 등 물리.화학적 물성 모두 우수하였으며, 환원 패턴은 상용촉매와 비슷하게 나타났다. 실제 반응온도인 $650^{\circ}C$에서 소성하여 화학흡착을 비교한 결과,상용촉매는 니켈분산도 및 니켈표면적이 감소한 반면 균일용액 침전법으로 제조한 촉매는 거의 변화가 없었다. 개질 성능 또한 상용촉매보다 우수하였는데, 이것은 균일용액 침전법으로 제조한 촉매는 활성점(니켈)이 지지체에 나노사이즈로 고르게 잘 분산되었기 때문이라고 판단하였다. 또한 합성온도 조절을 통해, $650^{\circ}C$ 소성 후에 물성변화를 살펴보았고 합성온도 $85^{\circ}C$에서 고분산 니켈 촉매 제조가 가능하였다.

  • PDF

Effects of Input Gases on the Growth Characteristics of Vertically Aligned Carbon Nanotubes in Plasma Enhanced Hot Filament Chemical Vapor Deposition

  • Han, Jae-Hee;Yang, Ji-Hun;Yang, Won-Suk;Yang, Cheol-Woong;Yoo, Ji-Beom;Park, Chong-Yun
    • Journal of Korean Vacuum Science & Technology
    • /
    • 제4권2호
    • /
    • pp.55-60
    • /
    • 2000
  • Vertically aligned carbon nanotubes on nickel coated glass substrates were obtained at low temperatures below 600$\^{C}$ by plasma enhanced hot filament chemical vapor deposition where acetylene gas was used as the carbon source and ammonia gas was used as the dilution gas and catalyst. The diameters of the nanotubes decreased from 96 m to 41 m as NH$_3$/C$_2$H$_2$ ratio increased from 2:1 to 5:1. Total flow rate of input gases with constant NH$_3$/C$_2$H$_2$ ratio did not change the diameter of carbon nanotubes. No growth of the carbon nanotubes was observed with only C$_2$H$_2$ nor N$_2$ instead of NH$_2$. G line and D line in Raman spectra were observed, which implies that there were many structural defects in carbon nanotubes.

  • PDF

Ni-K2TixOy 촉매를 이용한 해조류 유래 수열 액화 원료의 수증기 개질 반응 연구 (Steam Reforming of Hydrothermal Liquefaction Liquid from Macro Algae over Ni-K2TixOy Catalysts)

  • 박용범;임한권;우희철
    • 청정기술
    • /
    • 제23권1호
    • /
    • pp.104-112
    • /
    • 2017
  • 해조류로부터 수열 액화 반응을 통해 생성된 원료를 이용하여 수소가스를 생산하기 위해 개질 반응용 상용화 촉매와 $K_2Ti_xO_y$가 첨가된 니켈(Ni) 제조 촉매를 사용하여 반응온도에 따른 수증기 개질 반응을 수행하였다. 반응원료는 해조류 바이오매스를 503 K의 반응온도에서 2시간 동안 수열 액화를 통해 생성된 액화 원료를 사용하였으며, 상용화 촉매(FCR-4-02)와 제조 촉매($Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, $Ni/K_2Ti_xO_y-ZrO_2/CeO_2$, Ni/$K_2Ti_xO_y$-MgO) 및 반응온도에 따른 수증기 개질 반응의 활성을 비교 연구하였다. 실험결과 제조 촉매 4종 모두 상용화 촉매와 비교하여 반응활성이 높게 나타나는 것이 확인되었으며, 제조 촉매의 지지체에 따라 생성되는 가스의 조성이 달라지는 것이 확인되었다. 특히, 산성이나 염기성을 띄는 $Al_2O_3$와 MgO의 지지체와 중성을 띄는 $SiO_2$의 지지체에서는 CO가 선택적으로 높게 생성이 되었으며 환원성을 띄는 $CeO_2$를 포함하는 지지체에서는 수성가스 전환 반응이 일어나 $CO_2$가 높게 생성됨을 보였다.