• 약학회지
• /
• 제4권1호
• /
• pp.43-46
• /
• 1959

A new quantitiative analytical method of prussic acid by "Microdiffusion analysis" was studied. HCN-Glucoside of ARMENIACA was hydrolysed with KOH in out-room of unit, and then concentrated sulfuric acid was poured in order to liberate the HCN gas. The liberated gas was absorbed into nickel sulfate solution of inner room of unit quantitatively. The excess of nickel sulfate was determined by EDTA Reagent using MX-indicator. By this method, the following results were obtained: (1) It was needed more than 4 hours, in order to hydrolyse completely at $50^{\circ}C$, but could be shortened to 3 hrs. at $^60{\circ}C$. (2) It was completely absorbed into nickel sulfate solution after 30min.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.585-588
• /
• 2005

The dissolution characteristic of metal shows the different tendency according to the applied electrical potential, the kind of electrolyte and pH value, etc. In the micro electrochemical machining (ECM), unfavorable oxide/passive layer formation and overall corrosion of electrodes must be prevented. The anodic polarization curve of nickel has distinct three dissolution regions, i.e. two active regions and the transpassive dissolution region. In this paper, the stable electrode potentials of workpiece and tool were determined in sulfuric acid and hydrochloric acid solution, respectively. In each solution, different machining property was shown and possible electrochemical reactions were discussed. On the basis of this experiment, the methodology to obtain the proper electrode potential was suggested.

• Bulletin of the Korean Chemical Society
• /
• 제12권4호
• /
• pp.368-370
• /
• 1991

The electrochemical behavior and the complex formation between N$i^{2+}$ and 1,7-diazs-15-crown-5 and 1,10-diaza-18-crown-6 in acetonitrile solution have been studied by DC polarography, differential puke polarography and cyclic voltammetry. Nickel(Ⅱ) complexes gave a single well-defined wave. The formation constants of their complexes were 1$0^{4.89} and 10^{3.86}$, respectively. Nickel(Ⅱ) ion was found to form complexes of 1-to-1 composition with 1,7-diaza-15-crown-5 and 1,10-diaza-18-crown-6. In addition, reduction steps were irreversible and the reduction current were diffusion controlled. The electrochemical reduction mechanism of Ni(Ⅱ)-macrocyclic diaza-crown complexes in acetonitrile solution is estimated.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.758-767
• /
• 1995

The purpose of this study was to evaluate canal shaping ability after canal preparation by using engine-driven nickel-titanium file and endosonic file in curved canals. 30 mesiobuccal canals of molars extracted within recent 3 months were divided into 3 groups. Group I and group II were prepared by using engine-driven nickel-titanium Gates-Glidden drill type and the engine-driven nickel-titanium file type. Group III prepared by using en do sonic file. The image of preinstrumented canals was taken by X-ray. The image of postinstrumented canal was taken by X-ray in the same condition of preinstrumentation. A magnified X-ray image on magnifier screen was traced and then compared the preinstrumentated canal image with the postinstrumentated canal image by superimposing method. The following results were obtained : 1. In the change of canal curvature, the engine-driven nickel-titanium Gates-Glidden drill type showed the least change and the ultrasonically filing showed the greatest change. 2. In the percentage of canal enlargement, the engine-driven nickel-titanium file type was greatest at all level(p<0.05), the apex of all group was the greatest, the difference of ultrasonically filing group showed greater between apex and cervix. 3. The percentage of canal enlargement on convex side was greater than that of on concave side in apex of each group(p<0.05). In the ultrasonically filing group, both sides of canal enlargement showed sharply difference(p<0.01). 4. The percentage of canal enlargement on convex side was greater than that of on concave side in the third of cervix of the engine-driven nickel-titanium file type and the ultrasonically filling. The percentage of canal enlargement of convex and concave side in the third of middle of the engine-driven nickel-titanium Gates-Glidden drill type show a similar canal enlargement between convex side and concave side. As above result, the engine-driven nickel-titanium file type was greater in canal enlargement than the other instruments. The engine-driven nickel-titanium Gates-Glidden dirll type was efficient endodontic instrument for curved canal preparation because it was least change in canal curvature.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.236-243
• /
• 2017

A fixed-bed zinc/nickel redox flow battery (RFB) is designed and developed. The proposed cell has been established in the form of a fixed bed RFB. The zinc electrode is immersed in an aqueous NaOH solution (anolyte solution) and the nickel electrode is immersed in the catholyte solution which is a mixture of potassium ferrocyanide, potassium ferricyanide and sodium hydroxide as the supporting electrolyte. In the present work, the electrode area has been maximized to $1500cm^2$ to enforce an increase in the energy efficiency up to 77.02% at a current density $0.06mA/cm^2$ using a flow rate $35cm^3/s$, a concentration of the anolyte solution is $1.5mol\;L^{-1}$ NaOH and the catholyte solution is $1.5mol\;L^{-1}$ NaOH as a supporting electrolyte mixed with $0.2mol\;L^{-1}$ equimolar of potassium ferrocyanide and potassium ferricyanide. The outlined results from this study are described on the basis of battery performance with respect to the current density, velocity in different electrolytes conditions, energy efficiency, voltage efficiency and power of the battery.

• 한국결정학회지
• /
• 제12권2호
• /
• pp.88-91
• /
• 2001

[NiL₃]Cl₂·3H₂O (1) (L=trans-1,2-diaminocyclohexane) 착물을 합성하고 구조를 규명하였다. 이 착물은 입방결정계, 공간군 P2₁3, a=13.830(1) Å, V=2645.9(2) ų, Z=4로 결정화 되었다. 이 착물의 구조는 최소자승법으로 정밀화하였으며, 최종 신뢰도 R₁(wR₂) 값은 1500회의 회절반점에 대하여 0.0766(0.2068)이었다.

• 한국표면공학회지
• /
• 제38권1호
• /
• pp.21-27
• /
• 2005

Tensile properties and hardness of nickel electroform from chloride-free nickel sulfamate electrolyte at 50℃ and PH 4.5 were investigated. Current density varied from 20 to 60 mA/㎠. The deposit thicknesses were 360, 480 and 980 ㎛. It was found in 480 ㎛ thick electroform that highest tensile and yield strengths and hardness of 83.7 ksi, 53.6 ksi and 216 DPH, respectively were obtained at a current density of 40 mA/㎠ and they were slightly decreased at 20 and 60 mA/㎠. However the ductility was lowest of 7.9% at 40 mA/㎠. Such a high strength and low ductility at 40 mA/㎠ seems to be related to the narrower columnar structure than those of other current densities. All the deposits exhibited pronounced necking behavior. Tensile strength, yield strength and ductility increased as the nickel electroform thickens. Initial strong (200) texture developed on stainless steel mandrel decreased and (111) and (220) textures increased as deposit thickness increased, whereas (200) texture was preferred as the current density increased.

• 자원리싸이클링
• /
• 제7권1호
• /
• pp.27-33
• /
• 1998

유리질산 및 불산이 제거된 산세폐액으로부터 Ni을 회수하기 위하여 컬럼식 연속추출장치에 의한 연속실험을 수행하였다. 먼저 Ni 회수 실험에 앞서 폐액중 다량 함유되어 있는 Fe나 Cr을 효과적으로 침전 제거하기 위해서는 중화제로 $CaCO_3$가 적절하며 이대 Ni은 전혀 침전되지 않는다. 한편 컬럼식 연속추출장치에 의한 No의 추출특성을 살펴보면 pulse velosity(Amplitude$\times$Frequency)가 증가함에 따라 수상과 유기상의 혼합효과가 증대되어 Ni의 추출율이 높아지고 이에 딸 HETS도 감소하고 있으나, pulse velosity가 임계치 이상으로 증가하게 되면 수상과 유기상의 강력한 혼합에 의해 원판과 원판사이에 분리층이 형성되지 못하고 컬럼 전체가 완전한 혼합 형태로 되어 추출율이 낮아지고 HETS도 길어지게 된다. 유기상에 추출된 Ni은 탈거시 탈거액으로 2M ${H}_{2}{SO}_{4}$액을 사용하면 효과적으로 농축 회수할 수 있다. 그리고 ${H}_{2}{SO}_{4}$용액중 $NiSO_4$의 용해도는 ${H}_{2}{SO}_{4}$ 농도가 증가함에 따라 감소하여 2M ${H}_{2}{SO}_{4}$ 용액에서는 55 gr/$\ell$ 정도로 나타나고 있으며, 이같은 $NiSO_4$의 과포화특성을 이용하면 탈거액의 증발과정을 거치지 않고 $NiSO_4$결정을 얻을 수 있다.

• 대한화학회지
• /
• 제22권1호
• /
• pp.19-24
• /
• 1978

Ambidentate 리간드인 isonitrosobenzoylacetone imine 및 그 N-알킬치환체들의 새로운 니켈(II)착물 Ni(IBA-NH)(IBA-NR)를 합성하였다. 여기서 IBA-NH 및 IBA-NR (R=H, methyl, ethyl, n-propyl, iso-propyl, n-butyl 또는 benzyl)은 각각 isonitrosobenzoylacetone imine 및 그 N-알킬치환체를 표시한다. 합성한 니켈(II)착물들의 적외선, 핵자기공명, 전자스펙트라 및 자기모멘트등을 측정한 결과 이들 착물에서 IBA-NH 리간드는 이소니트로소기의 산소를 통하여 니켈에 배위되어 6각형 고리를 이루고 있으며, 그리고 IBA-NR 리간드는 이소니트로소기의 질소를 통하여 니켈에 배위되어 5각형 고리를 이루고 있음을 확인하였다. 이들 리간드의 배위 구조는 Bose 등에 의해 알려진 isonitrosoacetylacetone imine 및 N-알킬유도체들의 구조와 유사하다.

• 대한치과교정학회지
• /
• 제48권3호
• /
• pp.153-162
• /
• 2018

Objective: The aim of this trial was to compare the alignment efficiency and intermaxillary arch dimension changes of nickel-titanium (NiTi) or copper-nickel-titanium (CuNiTi) round archwires with increasing diameters applied sequentially to the mandibular arch. Methods: The initial alignment phase of fixed orthodontic treatment with NiTi or CuNiTi round archwires was studied in a randomly allocated sample of 66 patients. The NiTi group comprised 26 women, 10 men, and the CuNiTi ($27^{\circ}C$) group comprised 20 women, 10 men. The eligibility criteria were as follows: anterior mandibular crowding of minimum 6 mm according to Little's Irregularity Index (LII), treatment requiring no extraction of premolars, 12 to 18 years of age, permanent dentition, skeletal and dental Class I malocclusion. The main outcome measure was the alignment of the mandibular anterior dentition; the secondary outcome measure was the change in mandibular dental arch dimensions during 12 weeks. Simple randomization (allocation ratio 1:1) was used in this single-blind study. LII and mandibular arch dimensions were measured on three-dimensional digital dental models at 2-week intervals. Results: No statistically significant difference was observed between NiTi and CuNiTi according to LII (p > 0.05). Intercanine and intermolar arch perimeters increased in the CuNiTi group (p < 0.001). Inter-first premolar width showed a statistically significant interaction in week ${\times}$ diameter ${\times}$ application (p < 0.05). Conclusions: The effects of NiTi and CuNiTi round archwires were similar in terms of their alignment efficiency. However, the intercanine and intermolar arch perimeters, and the inter-first premolar width changes differed between groups.