• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.132-135
• /
• 2011

The exchange bias field ($H_{EX}$) and the coercivity ($H_C$) variation and change depending on the thickness of intermediately super-soft magnetic NiFeCuMo layer with different thickness of the bottom NiFe layer were investigated. The $H_{EX}$ of triple pinned NiFe(4 nm)/NiFeCuMo($t_{NiFeCuMo}$= 1 nm)/NiFe(4 nm)/FeMn multilayer has the maximum value more less than one of single pinned NiFe(8 nm)/FeMn layer. If NiFeCuMo layer is inserted each into between the pinned and free NiFe layers, we can be used as GMR-SV device for a bio-sensor that has improved magnetic sensitivity.

• Journal of the Korean Magnetics Society
• /
• v.20 no.4
• /
• pp.129-133
• /
• 2010

Two-layered ferromagnetic alloy films (NiFe, CoFe) with a Conetic (NiFeCuMo) intermediately soft magnetic layer of different thickness were investigated to correlate the coercivity values and magnetization process with the strength of saturation field of hard axis. Thickness dependence of the $H_{EC}$ (coercivity of easy axis), $H_{HS}$ (saturation field of hard axis.), and X (susceptibility) of NiFe and NiFeCuMo thin films for the glass/Ta(5 nm)/[CoFe or NiFe(5 nm-t/2)]/NiFeCuMo(t = 0, 4, 6, 8, 10 nm)/[CoFe or NiFe(5 nm-t/2)]/Ta(5 nm) films prepared by the ion beam deposition method was measured. The magnetic properties $H_{EC}$, $H_{HS}$, and X of two-layered ferromagnetic CoFe, NiFe films with a NiFeCuMo intermediately super-soft magnetic layer were strongly depended on the thickness of NiFeCuMo layer. The value of the coercivity and magnetic susceptibility of the NiFeCuMo film decreased by 25% and doubled relative to that of the NiFe film.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.12a
• /
• pp.164-166
• /
• 2011

• Journal of Plant Biology
• /
• v.16 no.3_4
• /
• pp.40-44
• /
• 1973

Hawkeye(Fe-chlorosis resistant) and PI 54619-5-1(Fe-chlorosis sensitive) soybeans were grown with and without DPTA(diethylene triamine pentaacetic acid) in Yolo loam soil. The major purpose of the study was to compare leaf-stem distribution of microelements for different treatments which increase concentrations of microelements in plants to evaluate the role of the chelating agent in increasing translocation of the microelements. Plant responses and yields were recorded and Fe, Mn, Zn, Cu, Al, Co, N, Sn, Pb and Mo contents of leaves and stems were determined by emission spectrography. Sulfur(soil pH4) increased leaf concentrations of Mn, Zn, Cu, CO, Ni, Sn and Pb. DTPA, particularly at 50ppm in soil, increased leaf concentrations of Fe, Mn, Zn, Cu, Co, Ni and Mo. It increased Ti in leaves for the PI 54619-5-1 soybeans only. DTPA increased the ratios of the concentration in leaves to that in stems for Fe, Zn, Cu, Al, Ti, CO, Ni and Mo. Sulfur which increased the microelement concentration in both leaves and stems did not have this effect. DTPA increased the ratio at soil pH 6 and 8.5 in leaves to that in stems of the bush bean plants for Fe, Zn, Cu, Ni, but to a lesser extent in bush beans than in soybeans. PI 54619-5-1 soybeans tended to contain less of most of the metals than did Hawkeye soybeans.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.147-149
• /
• 2011

• Journal of Powder Materials
• /
• v.11 no.3
• /
• pp.193-201
• /
• 2004

1960년 Au-Si계 합금에서 처음으로 비정질상이 급속 응고법에 의해 보고된 이래/sup 1)/ 지난 40년 간 많은 합금계에서 비정질상이 보고되어졌다. 대표적으로 Fe-, Ni-, Co기 합금 등 많은 합금계에서 비정질상이 보고되었으나, 비정질상의 형성을 위해서는 약 105 K/s이상의 높은 냉각속도를 필요로 하였다. 1980년대 수백 K/s의 낮은 냉각속도 하에서도 비정질상이 형성될 수 있는 다원계 합금(multi-component alloy)이 Mg-Ln-(Ni, Cu, Zn), Ln-Al-TM 합금에서 보고되어 졌으나 많은 관심을 받지 못하다가 1993년 Zr-Ti-Ni-Cu-Be 합금에서 수 ㎝ 크기의 비정질합금 제조가 보고되면서 전 세계적으로 많은 관심을 받게 되었다. Zr-Ti-Ni-Cu-Be계 벌크 비정질 합금이 보고된 후 Zr-(Nb,Pd)-Al-TM, Pd-Cu-Ni-P, Fe-Co-Zr-Mo-W-B, Ti-Zr-Ni-Cu-Sn등 여러 합금계에서 벌크 비정질 합금이 보고되었다. (중략)

• YAKHAK HOEJI
• /
• v.45 no.5
• /
• pp.460-467
• /
• 2001

Heavy metals, such as Al, As, Cd, Cr Cu, Fe, Hg, Mn, Mo, Ni, Pb, Se, Si, Sn, V and Zn, were analysed on kidney cortex and medulla of Korean obtained from 154 forensic medical autopsy cadavers. Heavy metals were analysed by inductively coupled plasma atomic emission spectrometry In kidney cortex, the concentrations of Al, Cd, Cu, Mn, Mo, Pb, Se, Si and Zn were significantly higher than in the kidney medulla (Cd, Cu, Mn, Mo, Zn : p<0.01, AA, Pb, Se, Si : p<0.05). No significant local differences were found between kidney cortex and kidney medulla in the concentrations of As, Cr Fe, Hg, Ni, Sn and V. In kidney cortex and kidney medulla, Cd concentrations correlated positively with age, but Mn concentrations correlated negatively with age. A significantly positive correlation between Cd and Zn, Cd and Cu, Zn and Cu, Al and Si, Se and As was found in kidney cortex and kidney medulla. A significantly positive correlation between Hg and Se was only observed in kidney cortex. These results indicate that the distribution of hazardous heavy metals is similar to that of essential elements in the tissues.

• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.835-842
• /
• 1999

Si3N4 -Si3N4 joints were made using Ag-Cu-Ti and Ag-Cu-In-Ti via brazing method and the change in joint strength was investigated after heat treatment at $400^{\circ}C$ or $650^{\circ}C$ for up to 2000h. The initial strength of as-brazed joints with Ag-Cu-In-Ti was lower but the reduction of the strength was less dramatic than that with Ag-Cu-Ti. The joints made of a new brazing alloy Au-Ni-Cr-Mo-Fe which is developed for high temperature applications were heat-treated at $650^{\circ}C$ for 1000h. As the heat treatment time increased the bond strength increased. The results of the joining system with Mo or Cu interlayer showed that the strength of the joint with Mo interlayer was higher but the system incurred problems in joint production Also it was found from oxidation experiment that Ti and In affected the oxidation resistance of brazing alloy.

• Economic and Environmental Geology
• /
• v.24 no.3
• /
• pp.245-260
• /
• 1991

Surficial dispersion patterns of heavy metals and toxic elements (U, Mo, Cu, Zn, Fe, Mn, Co, Cr, V, Ni, Pb, and Cd) were investigated in the Dukpyungri, Goesan area covered with low grade uranium-bearing black shales. Maximum abundance of U in the black shale was 455ppm. Radioactivity was counted at a maximum of 7cps in black shales, and was less than 0.5cps in shales, slates, and oil shales of the control areas. Enrichment of Mo, V, Cu, Zn, Cd, and Pb in black shales is particularly characteristic compared with shales, slates, and oil shales of the control areas, whereas contents of Mn, Cr, Co, and Th in all rock samples tend to be almost similar. Residual top soils (0~15cm depth) over black shales show high contents of Mo, Cu, Zn, Ni, Cd, and V in comparison with the control areas. Contents of trace elements in subsoils (15~30cm depth) were higher about one and half times than those in topsoils. Average contents of Mo, Cu, Pb, Zn, Cd and V in garden soil and playground soil of an elementary school in Dukpyungri, Goesan area, were high about two to fifteen times compared with the control areas. Contents of trace elements in stream sediments were higher from two to eight times than those in residual soils. Sodium, AI, K, V, Cr, and Fe were more enriched in the roots of pine than in the twigs of pine. Contents of Li, AI, V, Ni, Cd, Fe, and Co were higher in the roots of azalea than in the twigs of azalea. Enrichment of P, Ca, and Mg was remarkable in the twigs of both pine and azalea. Biological absorption coefficients for essential elements (Zn, P, Mn, Ca and K)tend to be high, whereas those for the non-essential elements.(Ba, Ti, V, and Mo) and toxic elements(Cr, Co, Pb and Ni) be low. Less mobile elements (Pd, Cd, and Co) tend to show anomalies with higher contrast than more mobile elements(Mo, V, Zn, Cu and Ni) in the area covered with black shales.

• Journal of the Korean Magnetics Society
• /
• v.19 no.6
• /
• pp.197-202
• /
• 2009

The property of soft magnetism for the Corning glass/non-buffer or buffer Ta/Conetic(NiFeCuMo)/Ta prepared by the ion beam deposition sputtering was studied. The effect of crystal property and post annealing treatment depending on the thickness of Conetic thin films was investigated. The coercivities of Conetic thin films with easy and hard direction along to the applying magnetic field during deposition were compared with each other. The coercivity and magnetic susceptibility of Ta(5 nm)/Conetic(50 nm) thin film were 0.12 Oe and 1.2 ${\times}\;10^4$, respectively. From these results, firstly, the Conetic thin film was more soft magnetism thin film than other one such as permalloy NiFe. Secondly, the usage of soft magnetism Conetic thin film for GMR-SV (giant magneoresistance-spin valve) or MTJ (Megnetic Tunnel Junction) structure in a low magnetic field can be possible.