• 제목/요약/키워드: NiCo

검색결과 2,671건 처리시간 0.028초

NiSi에의 Co 치환에 대한 ab-initio 계산 (Ab-initio calculation on Co substitution into NiSi)

  • 김영철;서화일
    • 한국재료학회지
    • /
    • 제17권7호
    • /
    • pp.358-360
    • /
    • 2007
  • Cobalt subtitution on NiSi is investigated by using an ab-initio calculation. Firstly, a relaxed NiSi structure is calculated and the calculated lattice parameters are compared with experimentally determined lattice parameters. The calculated values are smaller than the experimental values by about 2%. As the calculation is based on 0 K, and the experimental measurement is performed at room temperature, those values are in good agreement. Next, a Co atom substitutes a Ni and Si site, respectively, to evaluate the preferable site between them. Co prefers Ni site to Si site. The calculated total energy also indicates that the Co substitution to Ni site stabilizes the NiSi structure. Therefore, the thermal stability of NiSi with Co addition can be achieved by the structure stabilization of NiSi by Co substitution into Ni site of NiSi.

Ni/Cu 인공초격자에서 NiFeCo 및 NiFe 계면 삽입층이 거대자기저항 거동에 미치는 영향 (Effects of NiFeCo of NiFe Insertion Layers on the Giant Magnetoresistance Behavior of Ni/Cu Artificial Superlattice)

  • 송용진;주승기
    • 한국자기학회지
    • /
    • 제5권6호
    • /
    • pp.963-967
    • /
    • 1995
  • Ni/Cu 인공초격자의 계면에 얇은 NiFeCo와 NiFe층을 삽입시 Ni/Cu 인공초격자의 자기 저항 거동에 미치는 영향에 관해 연구하였다. NiFe층이 Ni/Cu 인공초격자의 계면에 삽입된 경우 6%의 자기저항과 50 Oe의 포화자장을 보였으며 이때의 자기저항곡선은 hysteresis를 거의 보이지 않았다. NiFeCo층이 삽입된 경우는 자기저항값은 7%를 보였으나 포화자장과 hysteresis가 많이 증가하였다. 교류자장원을 이용한 동적자기저항을 측정한 결과 bias 자장하에서 자기저항의 증가폭이 NiFe층을 삽입한 경우가 NiFeCo를 삽입한 경우보다 컸으며 이는 hysteresis가 작았기 때문으로 해석된다.

  • PDF

$NiFe/FeMn/NiFe/CoFe/Al_2O_3/CoFe/NiFe$ 스핀 터널링 접합의 자기적 특성과 열처리 효과 (Magnetic Characteristics and Annealing Effects of $NiFe/FeMn/NiFe/CoFe/Al_2O_3/CoFe/NiFe$Spin Tunneling Junctions)

  • 최연봉;박승영;강재구;조순철
    • 한국자기학회지
    • /
    • 제9권6호
    • /
    • pp.296-300
    • /
    • 1999
  • DC 마그네트론 스퍼터링 방법으로 금속 마스크를 사용하여 십자형태로 substrate/Ta/NiFe/FeMn/NiFe/CoFe/Al2O3/CoFe/NiFe와 substrate/Ta/NiFe/CoFe/Al2O3/CoFe/NiFe/FeMn/NiFe 스핀 터널링 접합 구조를 제조하였다. 이러한 구조에서 절연층(Al2O3)의 형성조건과 각 층의 두께와 파워에 대한 증착율에 변화를 주어 24.3%의 자기 저항비를 얻었다. 두 종류의 구조에 대한 자기적 특성 비교와 Corning glass 7059와 Si(111) 기판의 종류에 따른 결과를 비교하였으며 소자 제조때 수반되는 온도변화에 대한 특성변화를 알아보고자 열처리를 하였다. 열처리 결과 자기 저항비는 15$0^{\circ}C$까지는 어느 정도 일정한 값을 유지하다가 18$0^{\circ}C$ 열처리 후 갑자기 감소하는 결과를 얻었다.

  • PDF

Polymer 다섯자리 Schiff Base Co(Ⅱ), Ni(Ⅱ) 및 Cu(Ⅱ) 착물들의 합성과 전기화학적 성질 (Synthesis and Electrochemical Properties of Polymeric Pentadentate Schiff Base Co (Ⅱ), Ni (Ⅱ), and Cu (Ⅱ) Complexes)

  • 최용국;최주형;박종대;심우종
    • 대한화학회지
    • /
    • 제38권2호
    • /
    • pp.136-145
    • /
    • 1994
  • Poly(4-vinylpyridine-co-styrene)[PVPS]리간드에 monomer착물인 M(Ⅱ)(SND) 및 M(Ⅱ)(SOPD)[M: Co(Ⅱ), Ni(Ⅱ) 및 Cu(Ⅱ)]들을 반응시켜 새로운 polymer다섯자리 Schiff base착물인 M(Ⅱ)(PVPS)(SND), M(Ⅱ)(PVPS)(SOPD)들을 합성하였다. 이들 착물들의 원소분석, IR-spectra, UV-visible spectra 및 T.G.A.측정결과에 의하여 Co(Ⅱ), Ni(Ⅱ) 및 Cu(Ⅱ) 착물들은 polymer 5배위 착물로 주어짐을 알았다. 또한 0.1M TEAP-DMF용액에서 순환 전압-전류법과 시차펄스 포라로그래피에 의한 이들의 전기화학적 성질은 Co(Ⅱ)(PVPS)(SND) 및 Co(Ⅱ)(PVPS)(SOPD)는 Co(Ⅲ)/Co(Ⅱ) 와 Co(Ⅱ)/Co(Ⅰ)의 두단계의 환원과정이 비가역적으로 일어나고, Ni(Ⅱ)(PVPS)(SND) 와 Ni(Ⅱ)(PVPS)(SOPD)는 Ni(Ⅱ)/Ni(Ⅰ)의 비가역적인 일단계 환원과정으로, 그리고 Cu(Ⅱ)(PVPS)(SND)와 Cu(Ⅱ)(PVPS)(SOPD)는 Cu(Ⅱ)/Cu(Ⅰ)의 비가역적인 일단계 환원과정으로 일어남을 알았다.

  • PDF

Co, Ni 및 Ca를 첨가한 Mn-Zn 페라이트의 자기적 성질 (Magenetic Properties of Co, Ni and Ca Substituted Mn-Zn Ferrite)

  • 하태욱;이정식
    • 한국자기학회지
    • /
    • 제5권1호
    • /
    • pp.15-20
    • /
    • 1995
  • 연자성재료인 Mn-Zn 페라이트에 미량의 첨가물로 CaO(0.1 mol%), NiO(0.0~6.0 mol%) 그리고 CoO(0.0~0.8 mol%) 첨가하여 20 종류의 시료를 공침법으로 제조하여, 첨가물의 첨가량에 따른 Mn-Zn 페라이트의 자기적 성질을 연구하였다. NiO, CoO의 첨가량이 증가함에 따라 초기투자율은 감소하고, 반면 Curie 온도는 증가하였다. 보자력$(H_{c})$, 포화자화$(B_{s})$ 및 자기이력손실$(W_{h})$은 NiO의 첨가량이 증가함에 따라 증가하는 것으로 나타났다.

  • PDF

NiFeCo/Cu/NiFeCo/FeMn 스핀밸브 구조의 자기저항 거동 해석 (Analysis of Giant Magnetoresistance Behavior of NiFeCo/Cu/NiFeCo/FeMn Valves)

  • 배성태;김진영;민경익;신경호
    • 한국자기학회지
    • /
    • 제6권2호
    • /
    • pp.112-116
    • /
    • 1996
  • 스퍼터링법으로 제조한 NiFeCo/Cu/NiFeCo/FeMn 스핀밸브 자성 다층막의 자기적 성질과 자기저항에 대해 연구하였다. Cu 사잇층 두께가 15 .angs. 인 경우 약 6%의 자기저항을 얻을 수 있었다. NiFeCo/FeMn에서 교환이방성 자계는 약 20 Oe 정도였는데, 이는 NiFe/FeMn 계 스핀밸브 구조에서 보고된 값(100 Oe 이상) 보다 현저히 작은 것이다. 3 mTorr에서 제조한 NiFeCo 박막은 약 10 Oe 정도의 큰 보자력을 보임으로써 비슷한 조건에서 제조한 NiFe 박막의 경우(약 2 Oe)보다 상당히 큰 값을 갖는 것으로 관찰되었다. 작은 교환이방성 자계와 큰 보자력으로 인해 음 .rarw. 양 방향과 양 .rarw. 음 방향의 자화거동에 있어서 비대칭적인 자기저항 이력곡선 거동을 보이는 것으로 나타났다.

  • PDF

Study of CO Oxidation on Bare and $TiO_2$-coated NiO/$Ni(OH)_2$

  • Nam, Jong-Won;Kim, Kwang-Dae;Kim, Dong-Wun;Seo, Hyun-OoK;Kim, Young-Dok;Lim, Dong-Chan
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.109-109
    • /
    • 2011
  • CO oxidaition reacitvity of bare and $TiO_2$ -coated NiO/$Ni(OH)_2$ nanoparticles was studied. For the deposition of $TiO_2$ atomic layer deposition was used, and formation of three-dimensional island of $TiO_2$ on NiO/$Ni(OH)_2$ could be identified. Based on the data of X-ray Photoelectron Spectroscopy, we suggest that only $Ni(OH)_2$ existed on the surface, whereas NiO disappeared upon $TiO_2$ deposition. Both CO adsorption and CO oxidation took place on NiO/$Ni(OH)_2$ surfaces under our experimental conditions. CO adsorption was completely suppressed after $TiO_2$ deposition, whereas CO oxidation activity was maintained to large extent. It is proposed that bare NiO can uptake CO under our experimental condition, whereas hydroxylated surface of NiO can be active for CO oxidation.

  • PDF

Ni/Co/Ni를 적용한 Ni germane-silicide의 열 안정성 개선 (Thermal stability improvement of nickel germane-silicide with Ni/Co/Ni on silicon-germanium)

  • 황빈봉;지희환;오순영;배미숙;윤장근;김용구;박영호;왕진석;이희덕
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 II
    • /
    • pp.1069-1072
    • /
    • 2003
  • Germane-sillicide phase formation on S $i_{0.25}$G $e_{0.75}$ with Ni 100$\square$, Co 10$\square$/Ni 100$\square$ and Ni 50$\square$/Co 10$\square$/Ni 50$\square$ layer was studied by sheet resistance and Field Emission Scanning Electron Microscopy(FESEM). Thermal stability of nickel germane-silicide is found to be improved by sputtering Ni/Co/Ni on the SiGe. After annealing at 600, 650, $700^{\circ}C$, 30min., the nickel germane-silicide formed by Ni 50$\square$/Co 10$\square$/Ni 50$\square$ layer achieved a sheet resistance less than 17ohms/sq.(almost the same to the value before furnace annealing for 30min.) , while the process of the other two ways result in high sheet resistance and even sheet resistance fail due to Ge segregation.ion.

  • PDF

The Effect of K Promoter on Ni-Co (Bimetallic) Catalyst for Dry Methane Reforming

  • Dharmasaroja, Nichthima;Phongaksorn, Monrudee;Tungkamani, Sabaithip;Ratana, Tanakorn;Sornchammi, Thana
    • International Journal of Advanced Culture Technology
    • /
    • 제3권2호
    • /
    • pp.110-117
    • /
    • 2015
  • 10 wt% (Ni-Co) catalysts with different Ni and Co content : 10%Ni, 9%Ni1%Co, 7%Ni3%Co, 5%Ni5%Co, 3%Ni7%Co, and 10%Co; were prepared using sol-gel method followed by incipient wetness impregnation method. To investigate the catalytic activity including the stability, dry methane reforming were demonstrated over the pelletized catalysts at $620^{\circ}C$ under atmospheric pressure in a $CH_4:CO_2:N_2$ feedstock for 360 min. The results showed that bimetallic catalysts with the Co content equal to or greater than 3% were more stable than monometallic catalysts (10%Ni and 10%Co). The temperature programmed hydrogenation interpreted that the additional of Co into Ni catalyst improved the carbon resistance from methane cracking. Promoted this type of bimetallic catalyst using 1wt% K (trimetallic catalyst) prevented the carbon formation on the catalyst. The temperature programmed desorption of $CO_2$ indicated that this trimetallic catalyst has a greater number of strong basic sites. Moreover, the appearance of K lowered the number of weak basic sites and decreased the conversion of methane by 12 %.