• Journal of the Korean institute of surface engineering
• /
• v.37 no.2
• /
• pp.76-79
• /
• 2004

Nickel chloride coated protein chip plate was developed by using a spin coating method. The ability of histidine tagged protein adsorption was investigated at various solvents. The surface of plate has a large aggregated nickel complex with high density in water. However, the surface of plate has a very small size of aggregated nickel complex with low density in isopropanol. The ability of protein adsorption decreased as increasing the size of alkyl chain in various alcohol solvents. The mechanism on the ability of protein adsorption at the plate surface is discussed.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.69-74
• /
• 2001

This paper was to investigate of a adhesiveness for the plasma sprayed coating materials did salt spray by acoustic emission method in tensile loadings. The powders used for the coating were nickel aluminum composite powder Ni-4.5wt.%Al and titanium dioxide powder $TiO_2$. These powders were coated on a carbon steel S45C by plasma spray method. The result solution was a 5% NaCl and the slat spray times were 2, 5 and 10 hours respectively. The salt solution penetrated into the surface of the substrate through pore of the coating layer built in the process of plasma spay. Corrosion productions formed on the surface of substrate. The adhesiveness between the substrate and the coating layer is weaken by corrosion and the exfoliation initiated chiefly at the corrosion surface of the substrate. The AE events and energy of the corroded coating specimens decreased as the salt spray times increased.

• Electrical & Electronic Materials
• /
• v.6 no.6
• /
• pp.537-544
• /
• 1993

기본조성이 0.5[Pb(Ni$_{1}$3/Nb$_{2}$3/)O$_{3}$]-0.5[0.65PbTiO$_{3}$ -0.35PbZrO$_{3}$] (PNN-PT-PZ)인 압전세라믹스를 NaCl-KCI를 사용한 flux의 양 및 소결온도에 따른 생성반응과 소결특성, 유전 및 압전특성을 조사하였다. 이때 1몰의 산화물에 대한 flux의 양은 0.1, 2 및 5mole로 하였으며 소결온도는 1000-1200.deg.C로 하였다. 본 연구의 flux법은 고상반응법에 비해 낮은 하소온도에서 pyrochlore상을 현저히 줄일수 있었으며 고상반응법보다 낮은 온도에서 치밀화가 이루어질뿐 아니라 유전 및 압전특성을 개선할 수 있었으며 소결온도도 낮출 수 있었다. Flux의 양이 증가할수록 결정의 입성장이 빨랐으며 유전 및 압전특성이 가장 좋은 flux의 첨가량의 조건은 1mole이었다.

• Journal of Environmental Science International
• /
• v.13 no.9
• /
• pp.835-843
• /
• 2004

N,N-bis(2-salicylaldehyde)dipropylenetriamine(5- Hsaldipn), N,N-bis( 5-bromosalicyl-aldehyde) dipropylenetriamine (5-Brsaldipn), N,N-bis(5-chlorosalicy laldehyde )dipropylene-triamine(5-Clsaldipn), N,N-bis(2-hydroxy- $5-methoxy-benzaldehyde)dipropylenetriamine(5-OCH_3saldipn)$ and N,N-bis (2-hydroxy-5-nitrobenzaldehyde)dipropylenetriamine $(5-NO_2saldipn)$ were synthesized and characterized by elemental analysis, infrared spectrometry, NMR spectrometry and mass spectrometry. Their proton dissociation constants were determined in 70% dioxane/30% water solution by potentiometric. Stability constants of the complexes between these ligands and the metal ions such as Cu(II), Ni(II) and Zn(II) were measured in dimethyl sulfoxide by a polarographic method. Stability constants for the ligands were in the order of $5-OCH_3$ > 5-H > 5-Br > 5-Cl > $5-NO_2$ saldipn. Enthalpy and entropy changes were obtained in negative values.

• Carbon letters
• /
• v.9 no.2
• /
• pp.105-107
• /
• 2008

In this work, we employed an electroless nickel plating on glass fibers in order to enhance the electric conductivity of fibers. And the effects of metal content and plating time on the conductivity of fibers were investigated. From the results, island-like metal clusters were found on the fiber surfaces in initial plating state, and perfect metallic layers were observed after 10 min of plating time. The thickness of metallic layers on fiber surfaces was proportion to plating time, and the electric conductivity showed similar trends. The nickel cluster sizes on fibers decreased with increasing plating time, indicating that surface energetics of the fibers could become more homogeneous and make well-packed metallic layers, resulting in the high conductivity of Ni/glass fibers.

• Carbon letters
• /
• v.10 no.3
• /
• pp.230-233
• /
• 2009

In this study, a low temperature growth of high-quality carbon nanotubes on glass substrate using a local surface heating without heating damage to substrate was tried and characterized. The local joule heating was induced to only Ni/Ti metal film on glass substrate by applying voltage to the film. It was estimated that local surface joule heating method could heat the metal surface locally up to around $1200^{\circ}C$ by voltage control. We could successfully obtain high-quality carbon nanotubes grown at $300^{\circ}C$ by applying 125 V for joule heating as same as carbon nanotubes grown at $900^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.693-698
• /
• 2002

A method has been described for the determination of Cu(Ⅱ), Pb(Ⅱ), Ni(Ⅱ), Cd(Ⅱ), Mn(Ⅱ) and Fe(Ⅲ) by flame atomic absorption spectrometry (FAAS) after preconcentration on Amberlite XAD-16 resin, using hexamethyleneammonium-hexamethylenedithiocarbamate (HMA-HMDTC) as a chelating agent, and NH3/NH4Cl buffer solution (pH 9). Influences of various analytical parameters such as pH, concentration of nitric acid, amount of analytes, diverse ions and sample volume were investigated. The relative standard deviation (RSD) and the detection limit (LOD) were found in the range of 0.8-2.9% and 0.006-0.277 ㎍/mL,respectively. Recoveries obtained by the column method were quantitative ( >95%) at optimum conditions.The method was applied to the determination of some metal ions in seawater and wastewater samples. A high preconcentration factor (about 150 for seawater and 75 for wastewater samples) and simplicity are the main advantages of this suggested method.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.205-208
• /
• 2001

Schottky barrier diodes are fabricated on a intrinsic GaN(4${\mu}{\textrm}{m}$) epitaxial structure grown by rf plasma molecular beam epitaxy (MBE) on sapphire substrates. First, We make Ohmic electrodes (Ti/Al/Ti/Au) by evaporator. Next, we contact RuO$_2$ by dipping in the solution (RuCl$_3$.HClO$_4$), and then we deposit Ni/Au on the surface of RuO$_2$ by evaporator. We study the electrical characteristics of GaN Schottky barrier diodes made by these methods. Measurements are C-V, I-V, SEM, EDX, and XRD for the characteristics of devices. Thickness of RuO$_2$ layer depends on supplied voltage and dipping time. Device of thinner RuO$_2$ layer have a good Schottky characteristics compare with device of thicker RuO$_2$ layer

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2459-2466
• /
• 2010

Unfunctionalized biaryl compounds were parallelly and combinatorially prepared by the traceless hydrogenolysis of biarylsulfonates supported on pentaerythritol. The hydrogenolysis using 2-propylmagnesium chloride in the presence of $dppfNiCl_2$ efficiently generated corresponding biaryl derivatives without any memory of the support. The strategy using pentaerythritol as a small soluble support was disclosed to have a potential to combine the benefits of both SPOS and solution-phase reaction with fast reaction rate, facile isolation of intermediates, easy analysis of intermediates and atom economical manner. The novel tetrapodal support is expected to be an efficient substitute for polymeric supports in many circumstances.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.1030-1036
• /
• 1994

The ceramics in the system 0.5[Pb(Ni1/3Nb2/3)O3]-0.5[0.65PbTiO3-0.35PbZrO3] were prepared by conventional solid state reaction method, double calcined method (columbite precursor method) and flux method using NaCl-KCl. Amount of pyrochlore phase for the calcined powders, sintering charateristrics, dielectric and piezoelectric properties were then investigated. Sintering temperature was 1000~120$0^{\circ}C$ and in case of flux method, the amount of flux to oxide was 1 : 1 mole ratio. The dielectric and piezoelectric properties of ceramics prepared by double calcined method and flux method were found to be better than those by conventional method. It was also possible to lower sintering temperature and reduce the amount of pyrochlore phase either by double calcined method or flux method. But with increasing sintering temperature, the difference in characteristrics due to diffrent fabrication method gradually.