• Journal of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.311-317
• /
• 1981

A new nickel(II) compound, $Ni(CH_2SiMe_3)_2((C_6H_5)_2PCH_2CH_2P(C_6H_5)_2)$, 1, has been prepared by the reaction of $NiCl_2((C_6H_5)_2PCH_2CH_2P(C_6H_5)_2)$ with $Me_3SiCH_2Li$. The compound, 1, is stable under nitrogen at room temperature both in solution and in the solid state. Thermal decomposition of 1 in solution or in the solid produces the reductive coupling product, $Me_3SiCH_2CH_2SiMe_3$ which is also afforded by the reactions of 1 with CO and $O_2$ at room temperature, and with $(C_6H_5)_2PCH_2CH_2P(C_6H_5)_2$ at 80${\circ}$C.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.857-862
• /
• 2004

Production of titanium powder directly from tantalum oxides ($TiO_2$) pellet through an electronically mediated reaction (EMR) by calciothermic reduction has been investigated. Feed material ($TiO_2\;pellet$) and reductant (Ca-Ni alloy) were charged into electronically isolated locations in a molten calcium chloride ($CaCl_2$) bath at $950^{\circ}C$. The current flow through an external circuit between the feed (cathode) and reductant (anode) locations was monitored during the reduction of $TiO_2$. The current approximately 3.2A was measured during the reaction in the external circuit connecting cathode and anode location. After the reduction experiment, pure titanium powder with low nickel content was obtained even though Ca-Ni alloy was used as a reductant. These results demonstrate that titanium powder can be produced without direct physical contact between the feed and reductant. In certain experimental conditions, pure titanium powder with approximately $99.5\;mass\%$ purity was successfully obtained.

• Corrosion Science and Technology
• /
• v.10 no.2
• /
• pp.60-64
• /
• 2011

Lean duplex stainless steels have been developed in Korea for the purpose of being used in the seawater systems of industry. There are also many important seawater systems in nuclear power plants. These systems supply seawater to cooling water condenser tubes, heat exchanger tubes, related pipes and chlorine injection systems. The flow velocity of some part of seawater systems in nuclear power plants is high and damages of components from corrosion are severe. The considered lean duplex stainless steels are STS329LD (20.3Cr-2.2Ni-1.4Mo) and STS329J3L (22.4Cr-5.7Ni-3Mo) and PRENs of them are 29.4 and 37.3 respectively. Physical, mechanical and micro-structural properties of them are evaluated, and electrochemical corrosion resistance is measured quantitatively in NaCl solution. Critical Pitting Temperatures (CPT)s are measured on these alloys and pit depths are evaluated using laser microscope. Long period field tests on these alloys are now being performed, and some results are going to be presented in the following study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.136-137
• /
• 2007

LCD 패널의 전기전도에 대한 물량여부를 측정하기 위한 프르브 유니트의 핵심소자 중 하나인 블레이드 타입의 핀을 제작하는데 있어서 주 소재인 베릴륨니켈 박판의 식각 조건에 대하여 연구하였다. 사용된 베릴륨니켈 기판의 두께는 $20{\mu}m$이며, DFR을 이용하여 패터닝하였고 염화제이철 및 황산을 첨가한 용액을 이용하여 침전법으로 단면 식각을 실시하였다. 베릴륨니켈 박판은 2mol의 염화제이철에 1mol의 황산을 첨가한 용액으로 $40^{\circ}C$의 온도에서 식각하였을때 가장 빠른 식각을 보였으며, 그에 따라 식각된 면의 상태도 매우 깨끗하고 수직 가까운 식각면이 나타남을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• v.32 no.5
• /
• pp.514-520
• /
• 2000

The mechanism of corrosion behavior has to be understood clearly to select an optimum material for handling molten salts to be used in the oxide reduction process of PWR spent fuel. In this study, the oxidation states of corrosion products on the surface of Inconel 600 and 800H as well as their chemical compositions and structural informations were determined by using XPS, ICP-AES, AAS, EPMA and XRD after the corrosion experiment with lithium molten salts at 75$0^{\circ}C$ for 25 hours. Nickel and oxygen were detected from the corrosion products on the surface of Inconel plates and chromium was found to be dissolved out into lithium molten salts leaving cracks on the surface. The corrosion products were identified as metal oxides such as Fe$_2$O$_3$, Cr$_2$O$_3$, NiO, NiFe$_2$O$_4$and MnO by using XPS and XRD.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.11
• /
• pp.1106-1110
• /
• 2000

New 14-membered tetraaza macrocycles 1,8-diallyl-3,5,7,7,10,12,14,14-octamethyl-1,4,8,11-tetraazacyclotetradecane $(L^2)$ and 1,8-bis(n-propyl)-3,5,7,7,10,12,14,14-octamethyl-1,4,8,11-tetraazacyclotetradecane $(L^3)$ have been prepared by direct react ion of 2,5,5,7,9,12,12,14-octamethyl-1,4,8,11-tetraazacyclotetradecane $(L^1)with$ allyl bromide or n-propyl bromide. The nickel(II) and copper(II) complexes of $L^2andL^3have$ been prepared. The macrocycles show high copper(II) selectivity against nickel(II) ion in methanol solutions containing water. The wavelengths (ca. 505 nm) of the d-d bands for the nickel(II) complexes are extraordinarily longer than those for the complexes of $L^1and$ other related di-N-alkylated 14-membered tetraaza macrocycles. Crystal structure of $[NiL^2](ClO4)_2$ shows that the average Ni-N bond distance $(1.992\AA)$ of the complex is distinctly longer than those of other related nickel(II) complexes. Effects of the N- and C-substituents on the properties of the macrocyclic compounds are discussed.

• Corrosion Science and Technology
• /
• v.20 no.6
• /
• pp.347-360
• /
• 2021

Currently, the demand for eco-friendly energy sources is high, which has prompted research on polymer electrolyte membrane fuel cells. Both aluminum alloys and nickel alloys, which are commonly considered as materials of bipolar plates in fuel cells, oxide layers formed on the metal surface have excellent corrosion resistance. In this research, the electrochemical characteristics of 6061-T6 aluminum alloy and Inconel 600 were investigated with chloride concentrations in an acid environment that simulated the cathode condition of the PEMFC. After potentiodynamic polarization experiments, Tafel analysis and surface analysis were performed. Inconel 600 presented remarkably good corrosion resistance under all test conditions. The corrosion current density of 6061-T6 aluminum alloy was significantly higher than that of Inconel 600 under all test conditions. Also, 6061-T6 aluminum alloy and Inconel 600 presented uniform corrosion and intergranular corrosion, respectively. The Ni, Cr, and Fe, which are the main chemical compositions of Inconel 600, are higher than Al in the electromotive force series. And a double oxide film of NiO-Cr₂O₃, which is more stable than Al₂O₃, is formed. Thus, the corrosion resistance of Inconel 600 is better.

• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.143-152
• /
• 1992

Corrosion resistances in various acids and high temperature oxidation properties have been investigated for the Ni-base superalloy KM 1557. Corrosion tests were performed in $H_2SO_4$, HCl, $HNO_3$, $H_3PO_4$ and $CH_3COOH$. Oxidation tests were carried out in air for 20 and 110hrs at $900^{\circ}C$, $950^{\circ}C$ and $1050^{\circ}C$. Hot corrosion tests were done in salt bath of 75% $Na_2SO_4-25%$ NaCl at $900^{\circ}C$ for 20hrs. After the tests, the samples were observed by optical microscopy and analysed by EPMA and X-ray mapping in order to investigate the distribution of composition. It was shown that corrosion resistances in various acids and hot salt bath were proven to be excellent. It was suggested that the amounts of oxides were determined mainly by the depth of internal and intergranular $Al_2O_3$ oxide layers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.576-584
• /
• 2020

The extruder screw material is mainly SKD11, but the recent development of synthetic resins have increased the occurrence of chemical corrosion and wear. To solve this issue, high chromium cast iron is needed because of its good abrasion resistance and corrosion resistance, but its use is avoided because of its poor machinability. In this study, to improve the machinability of high chrome cast iron, 0, 0.5, 1.0, 1.5% of nickel, which has excellent workability, was added to high chromium cast iron with a composition of Fe-23Cr-2.5C-1.2Si-1.08Mn-0.48Mo-0.3V, and annealed after casting. Subsequently, the effect of nickel on the machinability and corrosion resistance was analyzed using a turning test and coin polarization test, and compared with SKD11. After casting using a high-frequency vacuum induction furnace, the annealing treatment was performed at 750 ℃ for five hours and then reheated at 1100 ℃ for five hours. A turning test after annealing at 750 ℃ showed that the machinability was improved remarkably when the nickel content was over 1.0%. In the potentiodynamic polarization test in a 5% NaCl solution, the corrosion resistance decreased with increasing nickel content in the as-cast and annealing treatment. On the other hand, after reheating, the corrosion resistance was best with a 1.5% nickel content.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.189-198
• /
• 2011

In the present paper two new thiosemicarbazones i.e., 4[N-(4'-ethylbenzalidene)amino]antipyrine thiosemicarbazone (EBAAPTS) and 4[N-(2',4'-dimethylbenzalidene)amino]antipyrine thiosemicarbazone (DMBAAPTS) have been synthesized and characterized. The complexing abilities of these thiosemicarbazones i.e. EBAAPTS and DMBAAPTS towards cobalt(II) and nickel(II) salts have been explored. The reactions of the hot ethanolic solutions of cobalt(II) and nickel(II) salts with EBAAPTS and DMBAAPTS led to the formation of the novel complexes of general composition [$MX_2(L)H_2O$] (M=$Co^{2+}$ or $Ni^{2+}$; X=$Cl^-$, $Br^-$, $NO_3^-$, $NCS^-$ or $CH_3COO^-$; L=EBAAPTS or DMBAAPTS). The newly synthesized complexes have been characterized by elemental analyses, molar mass, molar conductance, magnetic susceptibility, infrared and electronic spectral studies. The molar conductance measurements of the complexes in nitrobenzene correspond to their non-electrolytic nature. All the complexes are of high-spin type. On the basis of spectral studies an octahedral geometry has been assigned for Co(II) and Ni(II) complexes of the type [$MX_2(L)H_2O$]. These complexes were screened for their antibacterial and antifungal activities on different species of pathogens, fungi and bacteria and their biopotency has been discussed.