• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.676-680
• /
• 2004

Complexes M($C_7H_2NO_5)3H_2O{\cdot}H_2O{\cdot}0.25MeCN$ (M=Ni, Co) were crystallized from the reactions of $Ni(CH_3COO)_2{\cdot}4H_2O\;or\;Co(CH_3COO)_2{\cdot}2H_2O$ with KSCN and 2,6-dicarboxy-4-hydroxypyridine (chelidamic acid). The structures were characterized by X-ray crystallography. The crystal structures of 1 and 2 show a distorted octahedral coordination geometry around the M(II) ions, which are chelated by one nitrogen atom and two oxygen atoms of the chelidamic acid and three water molecules. Complexes 1 and 2 display the hydrogen-bonded 3D framework. The magnetic behavior of 2 exhibits antiferromagnetic interaction.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.690-695
• /
• 2003

Soft-solution route employing PVA(Polyvinyl Alcohol) as a polymeric carrier in a mixed metal cation solution was used for synthesis of single-phase nickel aluminate (NiA1$_2$O$_4$) powders. The PVA ensured the homogeneous distribution of metal ions in the solution and it resulted in the decrease of crystallization temperature. The synthesized powders prepared by PVA addition were soft and ball-milled easily. The ball-milled powders of about 300 nm in size were fully densified to density of 4.35 g/㎤ at 1600$^{\circ}C$ for 1 h. The Vickers hardness, flexural strength, fracture toughness and thermal expansion coefficient of the sintered nickel aluminate were 14.2 ㎬, 304 ㎫, 4.8 ㎫$.$m$\^$1/2/ and 9.8${\times}$10$\^$-6//$^{\circ}C$, respectively.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2000

The ACF/PP-g-AAc copolymers were synthesized by the irradiational grafting of acrylic acid onto ACF/PP fabric. The synthesis of copolymer was evidenced by the bands at 1720, 3600~3100 $cm^{-1}$ / on FT-IR spectrum. After the adsorption of metal ions on ACF/PP-g-AAc copolymers, the morphology with the small deposits on the fiber surface were observed by SEM. The optimal time for the metal ion adsorption equilibrium on ACF/PP-g-AAc copolymers was 24 hrs and their adsorption capacities increased in the order of Mn$^{2+}$>Cu$^{2+}$>Co$^{2+}$>Ni$^{2+}$. The adsorption capacities of ACF/PP-g-AAc copolymers were invariable after more than 10 times of regeneration.eration.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.57-63
• /
• 1993

Spectrophotometric determination of cobalt by flow injection method is described. 2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino) aniline rapidly forms a water-soluble complex with cobalt in $NH_3-NH_4Cl$ buffer solution at pH 10.5. The absorption maxima of this complex is at 545 nm with molar absorptivity of $58000L\;mol^{-1}\;cm^{-1}$. The calibration curve of cobalt is linear over the range of 0.1 to 0.6ppm and the detection limit is 25ppb. The relative standard deviation is ${\pm}0.72%$ for 0.5ppm and the sampling rate is $60samples\;hr^{-1}$. The interfering effect of some cations and anions was investigated. Ni(II), Cu(II), Fe(III) and $CN^-$ interfered severely. The interfering effect of these matallic ions could be decreased by adding $1.0{\times}10^{-3}M$ EDTA solution to the carrier stream.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2004

This paper deals with the recent development of high-voltage cathode materials of mono- and di- metal ions substituted spinel $LiMn_2O_4$ for lithium batteries. $LiCu_xMn_{2-x}O_4(0{\leq}x{\leq}0.5)$ shows reversible intercalation/deintercalation in two potential regions, $3.9\~43\;and\;4.8-5.0V$ and stable electrochemical cycling behavior but with low capacity. $LiNi_{0.5}Mn_{1.5}O_4$ obtained by a sol-gel process delivers a capacity of 127mAh $g^{-1}$ on the first cycle and sustains a value of 124 mAh $g^{-1}$ even after the 60th cycle. The $Li_xCr_yMn_{2-y}O_4(0{\leq}x{\leq}0.5)$ solid-solutions exhibit enhanced specific capacity, larger average voltage, and improved cycling behaviors for low Cr content. $LiCr_yMn_{2-y}O_4$ presents a reversible Li deintercalation process at 4.9V, whose capacity is proportional to the Cr content in the range of $0.25{\leq}x{\leq}0.5$ and delivers higher capacities. $LiM_yCr_{0.5-y}Mn_{1.5}O_4(M=Fe\;or\;Al)$ shows that the capacity retention is lowered compared with lithium manganate. The cumulative capacities obtainable with Al-substitutted materials are less than those with Fe-substituted materials. $LiCr_xNi_{0.5-x}Mn_{1.5}O_4(x=0.1)$ delivers a high initial capacity of 1$152mAh\;g^{-1}$ with excellent cycleability.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.52-57
• /
• 2009

This study investigates the metal adsorption properties of poly (lactic acid)-g-acrylic acid (PLA-g- AAc) synthesized by UV irradiation method. The properties including degree of grafting, water content, and ion exchange capacity (IC) strongly depend on the critical experimental factors such as UV intensity and AAc concentration. Under the optimized condition, the maximum degree of grafting, the IC value, and water content are 28%, 1.13 meq/g, and 38%, respectively. The synthesized ion exchanger shows strong capacity of adsorption for divalent metal ions such as $Cu^{2+}$, $Ni^{2+}$, and $Co^{2+}$, and greater selectivity of adsorption for $Cu^{2+}$.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.304-309
• /
• 2008

Cryptand series ion exchange resins were synthesized with 1-aza-12-crown-4 macrocyclic ligand attached to styrene (4 series dangerous matter) divinylbenzene (DVB) copolymer with crosslink of 1％, 2％, 4％ and 8％ by a substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, electron micrograph, and IR-spectrum. The effects of pH, time, dielectric constant of solvent and crosslink on adsorption of uranium (${UO_2}^{2+}$) ion were investigated. The uranium ion showed a fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium (${UO_2}^{2+}$) > nickel ($Ni^{2+}$) > gadolinium ($Gd^{3+}$) ion. The adsorption was in order of 1％, 2％, 4％, and 8％ crosslinked resin and adsorption of resin decreased in proportion to order of dielectric constant of solvents.

• Resources Recycling
• /
• v.17 no.1
• /
• pp.59-65
• /
• 2008

The adsorption features of nickel ion in wastewater on manganese dioxide from spent batteries were investigated for its usage as an adsorbent. The aquatic behavior of nickel ion was characterized by MINTEQ program and the considered influential variables on the adsorption of nickel ion were its initial concentration, reaction temperature, the amount of adsorbent, and pH. The adsorption ratio of nickel ion decreased with increasing its initial concentration and thermodynamic estimation has been carried out based on the adsorption characteristics of nickel ion depending on temperature. In addition, the adsorption of nickel ion was shown to be promoted according to the amount of manganese dioxide and a lot of nickel ions were adsorbed as the solution pH was raised.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.4
• /
• pp.305-309
• /
• 1983

The effect of the nucleic acid related compounds, amino acids and ureas on the breakage of calf thymus DNA were investigated with or without inorganic salts. PTU and Cys-SH possessed the ability of DNA strand breaks without metal ions. Tyr, Phe and Trp induced a weak DNA lesions in the presence of $CuSO_4$. Cys-SH with concentrations of 5mM in the presence of metal ion, $CuSO_4$, showed the strong ability to break the DNA. Various metal solutions($500{\mu}M$) except $Sn^{2+}$ did not show the DNA-breaking action. The DNA strands were damaged by some amino acids in the presence of $Cu^{2+}$, $Ni^{2+}$, $Mn^{2+}$, $Zn^{2+}$ and $Sn^{2+}$.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.4
• /
• pp.377-386
• /
• 2021

The Li-rich oxides are promising cathode materials due to their high energy density. However, characteristics such as low rate capability, unstable cyclic performance, and rapid capacity fading during cycling prevent their commercialization. These characteristics are mainly attributed to the phase instability of the host structure and undesirable side reactions at the cathode/electrolyte interface. To suppress the phase transition during cycling and interfacial side reactions with the reactive electrolyte, K (potassium) doping and Nb oxide coating were simultaneously introduced to a Li-rich oxide (Li_1.2Ni_0.13Co_0.13Mn_0.54O₂). The capacity and rate capability of the Li-rich oxide were significantly enhanced by K doping. Considering the X-ray diffraction (XRD) analysis, the interslab thickness of LiO₂ increased and cation mixing decreased due to K doping, which facilitated Li migration during cycling and resulted in enhanced capacity and rate capability. The K-doped Li-rich oxide also exhibited considerably improved cyclic performance, probably because the large K⁺ ions disturb the migration of the transition metals causing the phase transition and act as a pillar stabilizing the host structure during cycling. The Nb oxide coating also considerably enhanced the capacity and rate capability of the samples, indicating that the undesirable interfacial layer formed from the side reaction was a major resistance factor that reduced the capacity of the cathode. This result confirms that the introduction of K doping and Nb oxide coating is an effective approach to enhance the electrochemical performance of Li-rich oxides.