• Journal of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.422-426
• /
• 1977

Transition-metal-loaded zeolite Y catalysts were prepared from LaY by exchanging with cobalt, nickel and palladium ions, followed by reduction in a hydrogen stream. The reactions of 1-butene and n-butane were studied on Co-, Ni-and Pd-loaded Y as well as La-exchanged Y using micro-catalytic pulse technique. For 1-butene reaction Ni-, Co-, Pd-loaded Y and La-exchanged Y all showed high activity suggesting that the acidic component, not the metallic component, was primarily responsible for the activity. For n-butane reaction on La-exchanged Y, the addition of 1-butene enhanced the activity. Significant cracking conversion of n-butane was observed for Ni-and Pd-loaded Y. Activity was higher on samples reduced at higher temperature and of higher metal content. It seems that the dehydrogenation to butenes at metallic sites is the primary step in the n-butane cracking reaction. On Ni-Y the cracking product was C_1$ both from the mixture of 1-butane and hydrogen and from n-butane. It may be that on Ni-Y, n-butane is dehydrogenated to butenes and subsequently hydro-cracked to C_1$.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.478-485
• /
• 2011

Merocyanine derivatives transformed from spiropyran-containing compounds by irradiating the light of ultraviolet (UV) include zwitterion of phenolate anion and amine cation. Complexation of this phenolate anion on merocyaninemodified surface and Ni ion among metal ions led to a change of surface charge and it was measured with kelvin prove force microscopy (KFM). We found that the resultant surface potential decreased linearly as UV-exposed time increased, and finally were saturated. Also it was analyzed through XPS the immobilized amount of Ni ions was increased according to increase of UV-exposed time. It is considered that these properties could be applied for detection and a quantitative control of different metal ions. Further research is to aim construct specific scaffold/matrix which enable high selective, high sensitive and, especially, a quantitative immobilization of metal ions-binding biomaterials such as proteins and cells.

• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.237-242
• /
• 1979

The equivalent conductances of sodium, potassium, ammonium, tetramethylammonium, triethylammonium, diethylammonium and ethylammonium iodide, and picrate salts of sodium and potassium in ethylene carbonate have been measured at 40.0 $^{\circ}C. The limiting equivalent conductances of the salts have been computed by Fuoss-Onsager-Skinner equation. The limiting ionic equivalent conductances of $Na^+,\;K^+,\;and\;NH^+$ are in order of $Na^+ which is the reverse order of solvation for the ions in any solution, And the order of limiting ionic equivalent conductances for alkylammonium ions is $(C_2H_5)_4N^+<(C_2H_5)_3NH^+<(CH_3)_4N^+<(C_2H_5)_2NH_2^+<(C_2H_5)NH_3^+$ which coincides with the order of mass transfer. From the dissociation constants of the saltss determinde by Fuoss-Kraus method, it is found that ethyene carbonate is a good ionizing solvent for the salts. In addition, Stokes radii and effective fadii of ions have been calculated by Stokes law and Nightingale method, repectively. From the results, it appears tha alkylammonium ions and picrate ion seem to be not solvated, and tha iodide ion is fairly solvated in ethylene carbonate.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.204-215
• /
• 1993

Epoxy-activated chitin was synthesized by the reaction of epichlorohydrin with chitin which was isolated from waste marine sources such as crab shell. Followed by the reaction of epoxy-activated chitin with hexamethylenediamine, the aminohexyl chitin was synthesized. The aminohexyl chitin was subsequently reacted with epichlorohydrin to prepare the epoxy-activated aminohexyl chitin. Finally, the tannin-immobilized chitin (Resin I) was synthsized by the reaction of tannin solution with epoxy-activated aminohexyl chitin. Using silane coupling agent, the tannin-immobilized chitosan(Resin II) was synthesized by the reaction of $\gamma$-glycidoxypropyltrimethoxy silane with chitosan which was prepared by the deacetylation of chitin. Upon the pH variation, adsorptivities of these immobilized tannins to the metal ions such as $Cu^{+2}$, $Ni^{+2}$, $Cr^{+6}$, $Co^{+2}$, $Ca^{+2}$, $Pb^{+2}$, $Ba^{+2}$, and $UO_2{^{+2}}$ ions were determined by batch method. The adsorptivity tendencies of these immobilized tannin to the most of metallic ions were increased with pH. Furthermore, the adsorptivities of Resin(I) and Resin(II) upon the variation of pH, contact time, amount of resin and concentration of metal ion were investigated. As a result, it was found that these immobilized tannin on both chitin and chitosan showed good adsorptivities for uranyl ion.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.577-582
• /
• 2004

The azacrown compounds, 1,4-dioxa-7,10,13-triazacyclopentadecane-N,N',N''-triacetic acid, $N-ac_3[15]aneN_3O_2(II_a)$ and 1,4-dioxa-7,10,13-triazacyclopentadecane-N,N',N''-tripropioc acid, $N-pr_3[15]aneN_3O_2(II_b)$ were synthesized by modified methods. Potentiometry was used to determine the protonation constant of the $N-ac_3[15]aneN_3O_2\;and\;N-pr_3[15]aneN_3O_2$. The stability constants of complexes of the trivalent metal ions of $Ce^{3+},\;Eu^{3+},Gd^{3+},and\;Yb^{3+}$ and divalent metal ions of $Co^{2+},\;Ni^{2+},\;Cu^{2+},\;and\;Zn^{2+}$ with the ligands $N-ac_3[15]aneN_3O_2\;and\;N-pr_3[15]aneN_3O_2$ have been determined at $25{\pm}0.1^{\circ}C$ in 0.1 M $NaClO_4$ solution by potentiometric methods. The metal ion affinities of the two triazamacrocyclic ligands with three pendant acetate or propionate groups are compared to those obtained for the similar ligands, 1,7-dioxa-4,10,13-triazacyclopentadecane-N,N',N''-triacetic acid, and 1,7-dioxa-4,10,13- triazacyclopentadecane-N,N',N''-tripropioc acid. The trends in stability of complexes for different metal ions due to changes in the nitrogen position of the donor atoms of the ligand are discussed.

• Journal of the Korean Magnetics Society
• /
• v.7 no.2
• /
• pp.76-81
• /
• 1997

$Cu_{0.9}Ni_{0.1}Fe_2O_4$ has been studied with Mossbauer spectroscopy and X-ray diffraction. The crystal structure is found to be a cubic spinel with the lattice constant $a_0=8.386{\AA}$. The Curie temperature is determined to be $T_c=755K$ for a heating rate of 5 K/ min. The Mossbauer spectra consist of two six-line patterns corresponding to $Fe^{3+}$ at the tetrahedral(A) and octahedral(B) sites. Debye temperatures for A and B sites are found to be 568 k and 194 K, respectively. Atomic migration of $Cu_{0.9}Ni_{0.1}Fe_2O_4$ begins near 350 K and increases rapidly with increasing temperature such a degree that 71% of the ferric ions as A sites have moved over to the B sites at 550 K.

• Corrosion Science and Technology
• /
• v.11 no.6
• /
• pp.275-279
• /
• 2012

Ni-W alloy deposits have lately attracted the interest as an alternative surface treatment method for hard chromium electrodeposits because of higher wear resistance, hardness at high temperature, and corrosion resistance. This study deals with influences of process variables, such as electodeposition current density, plating temperature and pH, on the internal stress of Ni-W nanocrystalline deposits. The internal stress was increased with increasing the applied current density. With increasing applied current density, the grain size of the deposit decreases and concentration of hydrogen in the deposit increases. The subsequent release of the hydrogen results in shrinkage of the deposit and the introduction of tensile stress in the deposit. Consequently, for layers deposited at high current density, cracking occurs readily owing to high tensile stress value. By increasing the temperature of the electrodeposition from $60^{\circ}C$ to $80^{\circ}C$, the internal stress was decreased. It seems that an increase in the number of active ions overcoming the activation energy at elevated temperature caused a decline in the concentration polarization and surface diffusion. It decreased the level of hydrogen absorption due to the lessened hydrogen evolution reaction. Therefore, the lower level of hydrogen absorption degenerated the hydride on the surface of the electrode, resulting in the reduction of the internal stress of the deposits. By increasing the pH of the electrodeposition from 5.6 to 6.8, the internal stress in the deposits were slightly decreased. It is considered that the decrease in internal stess of deposits was due to supply of W complex compound in cathode surface, and hydrogen ion resulted from decrease of activity.

• Journal of the Korean Magnetics Society
• /
• v.8 no.3
• /
• pp.118-124
• /
• 1998

$Ni_{0.65}Zn_{0.35}Cu_{0.1}Fe{1.9}O_4$ has been studied with Mossbauer spectroscopy and X-ray diffraction. The crystal structure is found to be a cubic spinel with the lattice constant $a_0=8.390{\AA}$. Mossbauer spectra of $Ni_{0.65}Zn_{0.35}Cu_{0.1}Fe{1.9}O_4$ has been taken at various temperatures ranging from 12 K to 705 K. The isomer shift indicates that iron ions are ferric at tetrahedral [A] and octahedral sites [B], respectively. The Neel temperature is determined to be $T_N=705\;K$. As the temperature increases toward $T_N$ a systematic line broadening effect in the Mossbauer spectrum is observed and interpreted to originate from different temperature dependencies of the magnetic hyperfine fields at various iron sites. The quadrupole splitting just on $T_N$ is 0.41 mm/s whereas the quadrupole shift below $T_N$ vanishes. This implies that the orientation of the magnetic hyperfine field with respect to be principal axes of the electric field gradient is random.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.778-781
• /
• 1995

The mixed ferrite $Ni_{x}Co_{1-x}Fe_{2}O_{4}$ have been investigated by X-ray and $M\"{o}ssbauer$ spectoscpy. From the results of X-ray diffraction measurement the structure for this system is spinel, and the lattice constant is in accord with Vegard's law. $M\"{o}ssbauer$ spectra of $Ni_{x}Co_{1-x}Fe_{2}O_{4}$ have been taken at various temperature ranging from 13 to 800 K. The isomer shifts indicate that the valence states of the irons at both A(tetrahedral) and B(octahedral) sithe are found to be in ferric high-spin states. The variation of magnetic hyperfine fields at the A and B sites are explained on the basis on A-B and B-B supertransferred hyperfine interactions. It is found that Debye temperatures for the A and B sites of $CoFe_{2}O_{4}$ and $NiFe_{2}O_{4}$ are found to be ${\theta}_{A}=734{\pm}5K,\;{\theta}_{B}=248{\pm}5K,\;and\;{\theta}_{A}=378{\pm}5K,\;{\theta}_{B}=357{\pm}5K$, respectively. Atomic migration of $Ni_{0.3}Co_{0.7}Fe_{2}O_{4}$ starts near 450 K and increases rapidly with increasing temperature to such a degree that 61 % of the ferric ions at the A site have moved over to the B site by 700 K.

• Nano
• /
• v.13 no.12
• /
• pp.1850148.1-1850148.9
• /
• 2018

The interconnected three-dimensional Ni-Co-S nanosheets were successfully deposited on ZnO nanorods by a one-step potentiostatic electrodeposition. The Ni-Co-S nanosheets provide a large electrode/electrolyte interfacial area which has adequate electroactive sites for redox reactions. Electrochemical characterization of the ZnO@Ni-Co-S core-shell nanorods presents high specifc capacitance (1302.5 F/g and 1085 F/g at a current density of 1 A/g and 20 A/g), excellent rate capabilities (83.3% retention at 20 A/g) and great cycling stability (65% retention after 5000 cycles at a current density of 30 A/g). The outstanding electrochemical performance of the as-prepared electrode material also can be ascribed to these reasons that the special structure improved electrical conductivity and allowed the fast diffusion of electrolyte ions.