• 대한화학회지
• /
• 제31권4호
• /
• pp.334-343
• /
• 1987

$NiL_m{^{2+}}$착이온 {$Ni(rac-1[14]7-diene)^{2+},\;Ni(meso-1[14]7-diene)^{2+},\;Ni(1[14]4-diene)^{2+},\;{\alpha}-Ni(rac-[14]-decane)^{2+},\;{\beta}-Ni(rac-[14]-decane)^{2+},\;and\;Ni(meso-[14]-decane)^{2+}$}과 $CN^-$이온 사이의 화학반응은 분광광도법으로 연구하였다. $NiL_m{^{2+}}$착이온과 $CN^-$이온으로부터 1:1착이온, $[NiLm(CN)]^+$생성반응의 평형상수$(K_1)$는 3 ~ $25^{\circ}C$ 범위에서 결정되었다. $NiL_m{^{2+}}$착이온이 $Ni(rac-1[14]7-diene)^{2+},\;Ni(meso-1[14]7-diene)^{2+},\;Ni(1[14]4-diene)^{2+},\;{\alpha}-Ni(rac-[14]-decane)^{2+},\;{\beta}-Ni(rac-[14]-decane)^{2+}$, 그리고 $Ni(meso-[14]-decane)^{2+}$일때 평형상수($K_1$)은 $15^{\circ}C$에서 각각 4.7, 5.3, 6.2, 7.5, 9.4, 및 9.8이었다. $K_1$값은 온도가 증가함에 따라 감소하였다. $K_1$에 대한 온도영향으로 부터 열역학적 파라메터 $({\Delta}G^{\circ},\;{\Delta}H^{\circ},\;{\Delta}S^{\circ})$를 계산하였으며, 이 결과 $[NiLm(CN)]^+$ 생성반응은 모두 발열반응으로 나타났다. $NiL_m{^{2+}}$ 착이온과 $CN^-$이온은 반응하여 Ni(CN)_4{^{2-}}$이온과 거대고리 리간드 (Lm)가 생성된다. $[CN^-],\;[HCN],\;and\;[OH^-]$ 변화에 따라 $Ni(CN)_4{^{2-}}$이온의 생성속도는 0.5M $NaClO_4$, 온도 3∼$25^{\circ}C$ 범위에서 연구되었다. $[CN^-]$가 일정할 때 [HCN]가 증가하면 $k_{obs}/[CN^-]^2$값은 선형으로 증가하였다. $OH^-$ 이온이 과량으로 존재할 때 [$OH^-$]에 따라 역시 $k_{obs}/[CN^-]^2$ 값은 선형으로 증가하였다. $NiL_m{^{2+}}$ 착이온과 $CN^-$이온 반응의 속도상수($k_{obs}$)에 대한 온도영향으로 부터 활성화 파라메터$({\Delta}H^{\neq},\;{\Delta}S^{\neq})$를 결정하였다. $Ni(rac-1[14]7-diene)^{2+},\;Ni(meso-1[14]7-diene)^{2+},\;{\alpha}-Ni(rac-[14]-decane)^{2+},\;{\beta}-Ni(rac-[14]-decane)^{2+}$, 그리고 $Ni(meso-[14]-decane)^{2+}$ 순서로 d-d 전이에너지, $ν(cm^{-1})$가 감소할수록, ${\Delta}H^{\neq}$도 점차적으로 감소하였다. 그리고 5가지의 $NiL_m{^{2+}}$ 착이온과 $CN^-$이온 사이의 반응은 동일한 경로로 반응이 진행되었다.

• 대한치과교정학회지
• /
• 제25권2호
• /
• pp.187-200
• /
• 1995

국산 Ni-Ti합금 교정용 선재(ORTHOLLOY)의 특성을 평가하기 위하여 성분, 인장특성, 굽힘특성, 열처리성, 내식성, 이온용출 등에 대해 조사하고 외국산 Ni-Ti합금 선재(SENTALLOY)의 특성과 비교 분석한 결과는 다음과 같았다. ORTHOLLOY는 초탄성 효과를 나타내는 범위내에서의 Ni과Ti 함량을 포함하고 있었다. 인장실험에서 ORTHOLLOY는 연신율 $2\%$에서 $8\%$정도 범위내에서 하중의 변화가 거의 없는 초탄성 효과를 나타내었다. 3점 굴곡실험에서 ORTHOLLOY는 SENTALLOY 보다 같은 변위량에서 높은 하중값을 나타내었고, 초탄성을 나타내는 변위영역에서의 하중 범위는 ORTHOLLOY의 경우 0.014" 에서 80-100g, 0.016"에서 140-180g, 0.018" 에서 150-200g의 값을 나타내었다. $400^{\circ}C,\;500^{\circ}C$의 열처리에 의해 초탄성을 나타내는 하중범 위가 낮아졌고, 각 열처리 온도에서는 시간이 증가함에 따라 초탄성을 나타내는 하중값의 범위가 낮아졌으며 $600^{\circ}C$에서는 10분간의 열처리로 초탄성 효과가 소실되었다. 용출되어 나온 Ni 이온의 양은 SENTALLOY의 0.01ppm미만의 극소량에 비해 ORTHOLLOY에서는 0.3ppm 전후로 높게 나타났다. 침적 실험후 주사전자현미경 관찰을 통한 표면조직 소견은 SENTALLOY에서는 침적 전후 및 침적 시간의 경과에 관계없이 전체적으로 비교적 균일한 양상을 보였으나 ORTHOLLOY에서는 pitting corrosion양상을 보였다.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.308-314
• /
• 2016

Cobalt-, zinc-, and nickel-zinc-substituted nano-size manganese ferrite powders, $MnFe_2O_4$, $Mn_{0.8}Co_{0.2}Fe_2O_4$, $Mn_{0.8}Zn_{0.2}Fe_2O_4$ and $Mn_{0.8}Ni_{0.1}Zn_{0.1}Fe_2O_4$, were fabricated using a sol-gel method, and their crystallographic and magnetic properties were subsequently studied. The $MnFe_2O_4$ ferrite powder annealed at temperatures above 523 K exhibited a spinel structure, and the particle size increased as the annealing temperature increased. All ferrites annealed at 773 K showed a single spinel structure, and the lattice constants and particle size decreased with the substitution of Co, Zn, and Ni-Zn. The $M{\ddot{o}}ssbauer$ spectrum of the $MnFe_2O_4$ ferrite powder annealed at 523 K only showed a doublet due to its superparamagnetic phase, and the $M{\ddot{o}}ssbauer$ spectra of the $MnFe_2O_4$, $Mn_{0.8}Co_{0.2}Fe_2O_4$, and $Mn_{0.8}Zn_{0.2}Fe_2O_4$ ferrite powders annealed at 773 K could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. However, the $M{\ddot{o}}ssbauer$ spectrum of the $Mn_{0.8}Ni_{0.1}Zn_{0.1}Fe_2O_4$ ferrite powder annealed at 773 K consisted of two Zeeman sextets and one quadrupole doublet due to its ferrimagnetic and paramagnetic behavior. The area ratio of the $M{\ddot{o}}ssbauer$ spectra could be used to determine the cation distribution equation, and we also explained the variation in the $M{\ddot{o}}ssbauer$ parameters by using this cation distribution equation, the superexchange interaction and the particle size. Relative to pure $MnFe_2O_4$, the saturation magnetizations and coercivities were larger in $Mn_{0.8}Co_{0.2}Fe_2O_4$ and smaller in $Mn_{0.8}Zn_{0.2}Fe_2O_4$, and $Mn_{0.8}Ni_{0.1}Zn_{0.1}Fe_2O_4$. These variations could be explained using the site distribution equations, particle sizes and magnetic moments of the substituted ions.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.212-234
• /
• 1999

Dental restorative materials must have the physical properties to withstand wear and corrosion. Base metal alloys possess better mechanical properties and lower price than the gold alloys. For these reasons such alloys have largely replaced the precious metal alloys. One aspect to con-sider is the release of metal substances to oral environment. The release of elements from dental alloys is a continuing concern because the elements may have the potentially harmful biological effects on local tissues. The purpose of this study was to minimize metal release on the nonprecious metal surfaces by ion beam assisted deposition(IBAD) of titanium nitride (TiN) Ni-Cr-Be alloys with and without TiN coatings were secured in an wear test machine opposing ruby ball to determine their relative resistance to wear with loom, 200m, 300m and 400m sliding distance. And the corrosion behavior of the Ni-Cr-Be alloys with and without TiN coatings and 3 dental noble alloys have been studied. Potentiodynamic curves were used to analyse the corrosion characteristics of the alloys. The measurement of the released Ni and Cr ions was conducted by analysis of the electrolyte solution with atomic absorption spectroscopy. The results were as follows : 1. The critical sliding distance that wore down TiN coatings of $2.5{\mu}m$ thickness in this study condition was 300m. 2. Ion beam assisted deposition of TiN showed a good surface modification with respect to the properties of wear and corrosion resistance. 3. X-ray diffraction showed that the strongest peak of TiN is TiN(111) in the coatings. 4. The release of Ni and Cr ions from alloys measured by means of atomic absorption spectroscopy was reduced by ion beam assisted deposition of TiN.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.539-542
• /
• 2003

SDS-PAGE 결과 elution pH에 따라 분리되는 band pattern은 비슷하게 2band의 양상을 보이지만, FI값을 비교하여 보았을 때 다른 pH보다 8.0에서 가장 높은 수준을 보였으므로 GFPuv/cytochrome c-552 fusion Protein의 분리 ${\cdot}$ 정제에 가장 적합한 pH를 8.0으로 정하였다.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.693-698
• /
• 2002

A method has been described for the determination of Cu(Ⅱ), Pb(Ⅱ), Ni(Ⅱ), Cd(Ⅱ), Mn(Ⅱ) and Fe(Ⅲ) by flame atomic absorption spectrometry (FAAS) after preconcentration on Amberlite XAD-16 resin, using hexamethyleneammonium-hexamethylenedithiocarbamate (HMA-HMDTC) as a chelating agent, and NH3/NH4Cl buffer solution (pH 9). Influences of various analytical parameters such as pH, concentration of nitric acid, amount of analytes, diverse ions and sample volume were investigated. The relative standard deviation (RSD) and the detection limit (LOD) were found in the range of 0.8-2.9% and 0.006-0.277 ㎍/mL,respectively. Recoveries obtained by the column method were quantitative ( >95%) at optimum conditions.The method was applied to the determination of some metal ions in seawater and wastewater samples. A high preconcentration factor (about 150 for seawater and 75 for wastewater samples) and simplicity are the main advantages of this suggested method.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제39차 학술발표회
• /
• pp.83-84
• /
• 2008

A highly selective colorimetric chemosensor for $Hg^{2+}$ based on the semisquaraine(BSQ) containing benzothiazole moiety was investigated. BSQ showed color change only with $Hg^{2+}$ but it showed no significant changes upon addition of other metal ions such as $Ca^{2+},\;Pb^{2+},\;Al^{3+},\;Ce^{2+},\;Ba^{2+},\;Ni^{2+},\;Cd^{2+},\;Zn^{2+},\;and\;Mg^{2+}$. $Hg^{2+}$ ions coordinated to the BSQ forming 1:1 complex. The experimental data and conclusions are rationalized by $DMol^3$ calculation results.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.162-163
• /
• 2009

Colorimetric chemosensors are now considered as one of the most effective analytical method used in the environmental monitoring. In this study, 10 new direct dyes were synthesized to be used as colorimetric chemosensor. When metal ions such as $Al^{3+},\;Ca^{2+},\;Cd^{2+},\;Cr^{3+},\;Cu^{2+},\;Fe^{2+},\;Fe^{3+},\;Hg{^2+},\;Li^+,\;Mg^{2+},\;Na^+,\;Ni^{2+},\;Pb^{2+}\;and\;Zn^{2+}$ were added to the solutions of new dyes, the colors of the solutions were changed and can be easily detected by eyes without any expensive equipments. Some metal ions were coordinated to the new direct dyes forming complex. The experimental data and conclusions were rationalized by UV-VIS spectroscopy.

• 분석과학
• /
• 제13권6호
• /
• pp.810-814
• /
• 2000

The open-chain hexadentate $N_4$, $O_2$ ligands 1, 15-bis(2-hydroxybenzyl)-2, 6, 10, 14-tetraazapentadecane (BSATPD. 4HCl) has been synthesized as its tetrahydro-chloride salt and characterized by EA, IR, NMR, and Mass spectrum. Its protonation constants ($logK_n{^H}$) and stability constants ($logK_{ML}$) for $Cu^{2+}$, $Ni^{2+}$, $Co^{2+}$ and $Zn^{2+}$ ions were determined in aqueous solution by potentiometry and compared with those of analogous $N_4$, $O_2$ ligands contain ethtylenic spacers or propylenic spacers, which make six-membered chelate rings between the aliphatic nitrogen atoms.

• 한국환경과학회지
• /
• 제8권5호
• /
• pp.607-610
• /
• 1999

The odor removal of landfill site leachate was carried out using pyroligenous liquid. The constituent elements of pyroligenous liquid and leachate were also analysed, employing Atomic Absorption Spectroscopy(AAS). Before order removal, the heavy metal ions such as Pb, Zn, Cu, Mn, Fe and Ni, in pyroligenous liquid were detected with ultra trace level. However, in this liquid, other metal ions such as As, Hg and Cd were not observed. The optimum condition for removing odor fromthe leachate was observed in 15 times dilution of pyroligenous liquid. Also, the degree of outlet odor was 1. Furthermore, the concentration of odor constituent compounds, e.g. $H_2S, NH_3, NH_2$ and $CO_2$ in the leachate was remarkably reduced. Finally, water quality of the leachate was improved.