• 제목/요약/키워드: Ni-Mn-Co-Fe oxide

검색결과 54건 처리시간 0.023초

Mn-Co-Ni계 NTC 서미스터 제조 및 특성 (Preparation and characterization of Mn-Co-Ni NTC thermistor)

  • 이정일;김태완;신지영;류정호
    • 한국결정성장학회지
    • /
    • 제25권2호
    • /
    • pp.80-84
    • /
    • 2015
  • 상온용 NTC 서미스터로는 주로 Mn-Co-Ni 산화물계가 주료 사용된다. 본 연구에서는 Mn-Co-Ni 산화물계 분말을 이용하여 상온에서 가압 성형하여 $900{\sim}1300^{\circ}C$ 온도범위에서 3시간 동안 소결하여 서미스터 소자를 제작하였다. 소결온도에 따른 서미스터 세라믹 샘플의 상변화, 소결밀도, 미세구조 및 원소함량비 변화를 고찰하였다. $1250^{\circ}C$에서 소결된 Mn-Co-Ni 서미스터 소자에 대하여 온도에 대한 저항특성을 측정하였으며, 측정되는 절대온도의 역수와 저항의 로그함수값에 대한 변화를 고찰하였다.

Synthetic antiferromagnet CoFe/Ru/CoFe/FeMn을 이용한 스핀 밸브 구조의 자기저항 특성 (The Magnetoresistance Properties of Spin Valves with CoFe/Ru/CoFe/FeMn Synthetic Antiferromagnet)

  • 장성호;강탁;김민정;김희중;김광윤
    • 한국자기학회지
    • /
    • 제10권5호
    • /
    • pp.196-202
    • /
    • 2000
  • FeMn에 의해 교환 바이어스된 Synthetic antiferromagnet(CoFe/Ru/CoFe)을 가진 Top Ta/NiFe/CoFe/Cu/CoFe/Ru/CoFe/FeMm/Ta 스핀밸브 구조를 마그네트론 스퍼터링 법으로 제조하여 유효 교환이방성 및 자기저항 특성을 조사하였다. FeMn 반강자성층의 두께가 100$\AA$정도일 때 자기저항비와 유효 교환바이어스 자장이 최대값을 나타내었으며, 100 $\AA$ 이상 두께 증가시 FeMn층을 통한 션팅 전류에 의한 자기저항 효율의 저하로 자기저항이 점점 감소하였다. 자유층의 두께가 40 $\AA$일 때 7.5% 이상의 최대 자기저항비가 얻어졌으며, 자유층의 두께 감소에 따라 자기저항비는 감소하였다. Synthetic antiferrormagnet 구조에서 Cu층에 인접한 CoFe(Pl)층의 두께를 증가시키고 FeMn층에 인접한 CoFe(P2)층의 두께를 감소시켜 그 두께 차이가 증가할수록 자기저항비는 증가하였고 반면 유효 교환 바이어스 자장은 감소하였다. 자기저항특성의 증가는 Pl층 두께 증가로 인한 스핀의존산란 효율의 증가로 이해되었으며, 유효 교환 바이어스 자장의 감소는 최소에너지 모델의 이론적 계산을 통해 감소경향을 검증할 수 있었다.

  • PDF

Mn-Co-Ni 서미스터의 결정구조 분석 (Crystal structure of Mn-Co-Ni thermistor)

  • 이정일;민성욱;류정호
    • 한국결정성장학회지
    • /
    • 제25권5호
    • /
    • pp.225-229
    • /
    • 2015
  • 본 연구에서는 Mn-Co-Ni 삼성분계로 이루어진 NTC 서미스터의 cubic 스핀넬 결정구조의 변화를 고찰하고자 하였다. Mn, Co, Ni로 이루어진 산화물 원재료 분말들을 혼합하고 건조한 후 In-situ XRD 장비를 이용하여 공기분위기에서 상온부터 $1400^{\circ}C$까지 가열하면서 발생하는 결정구조 변화를 분석하였다. In-situ XRD 분석 결과 cubic 스핀넬 구조는 $900^{\circ}C$부터 존재하는 것을 확인할 수 있었으나, 온도가 $1300^{\circ}C$ 이상으로 올라갔을 때는 스핀넬 결정구조로부터 NiO의 상분리 현상이 발생하기 시작함을 관찰할 수 있었다. 이러한 NiO 상의 분리가 고온에서의 NTC 서미스터의 결정성 감소의 원인임을 알 수 있었으며, 제작된 NTC 서미스터의 표면을 FE-SEM을 이용하여 관찰하여 양품과 불량품의 차이를 분석하였다.

Synthetic antiferromagnet CoFe/Ru/CoFe/FeMn을 이용한 스핀 밸브 구조의 interlayer coupling field (Interlayer Coupling Field in Spin Valves with CoEe/Ru/CoFe/FeMn Synthetic Antiferromagnet)

  • 김광윤;신경호;김희중;장성호;강탁
    • 한국자기학회지
    • /
    • 제10권5호
    • /
    • pp.203-209
    • /
    • 2000
  • Synthetic antiferromagnet CoFe/Ru/CoFe/FeMn을 사용하고 자유층으로 NiFe/CoFe 이중 층을 사용한 top스핀밸브 구조를 dc magnetron 방식으로 제조하여, 자유층과 구속층의 두께변화에 따른 자기적 특성과 interlayer coupling field티 변화를 조사하였다 Si/Ta(50 $\AA$)/NiFe(x $\AA$)/CoFe(y $\AA$)/Cu(26 $\AA$)/CoFe(30 $\AA$)/Ri(7 $\AA$)/CoFe(15 $\AA$)/FeMn(100 $\AA$)/Ta(50 $\AA$) top synthetic 스핀밸브 시료에서 자유층의 두께 감소에 따른 interlayer coupling field를 조사한 결과 interlayer coupling field가 증가하였으며, 이것은 Neel 모델에 의한 정자기 교환결합에 기인하는 것으로 설명하였다. Top synthetic 스핀 밸브에서 Cu에 인접한 자성층(Pl)과 FeMn에 인접한 자성층(P2) 두께 차이에 따른 interlayer coupling field 의 의존성을 조사한 결과 $t_{P1}$> $t^{P2}$ 일 경우 interlayer coupling field(층간 교환 결합력 세기)는 기존 스핀 밸브에서 적용한 Kools이 제시한 modified Nel 모델에 잘 부합되나, $t_{P1}$ $\leq$ $t_{P2}$ 인 경우 모델과 부합되지 않음으로 새로운 모델이 필요함을 확인하였다 Cu 두께에 변화에 따른 층간 교환 결합력 세기 의존성을 조사한 결과 Cu 두께를 32 $\AA$으로 증가시 층간 교환결합력 세기는 10 Oe 이하로 감소하였다.감소하였다.다.

  • PDF

전기방사법을 이용한 Li[Ni1/3Co1/3Mn1/3]O2 나노 섬유의 합성 및 전기화학적 특성 (Synthesis and Electrochemical Properties of Li[Ni1/3Co1/3Mn1/3]O2 Nanowire by the Electrospinning Method)

  • 강충수;손종태
    • 한국전기전자재료학회논문지
    • /
    • 제24권10호
    • /
    • pp.850-854
    • /
    • 2011
  • Nano-fibers of the $Li[Ni_{1/3}Co_{1/3}Mn_{1/3}]O_2$ electrode were synthesized from a metal oxide precursor using the electrospun method. The XRD patterns of all prepared powders showed a hexagonal ${\alpha}$ - $NaFeO_2$ structure (space group: R-3 m, 166). Scanning electron microscopy showed that all the synthesized samples were comprised of nanofibers with a size of 100~800 nm. Among the samples tested, the calcined $Li[Ni_{1/3}Co_{1/3}Mn_{1/3}]O_2$ nanowires in oxygen heating atmosphere showed a high charge and discharge capacity of 239.22 and 172.81 $mAhg^{-1}$ at the $1^{st}$ cycle, respectively. In addition, the charge transfer resistance was also improved significantly compared to the other samples.

단계별 추출법을 이용한 망간각 구성 원소의 존재 형태 (Chemical Speciations of Elements in the Fe-Mn Crusts by Sequential Extraction)

  • 김종욱;문재운;지상범;고영탁;이현복
    • Ocean and Polar Research
    • /
    • 제26권2호
    • /
    • pp.231-243
    • /
    • 2004
  • Sequential extraction was carried out on twenty two subsamples of three ferromanganese crusts from three seamounts (Lemkein, Lomilik, and Litakpooki) near the Marshall Islands in the western Pacific. The extraction was designed to fractionate Fe-Mn crust forming elements into low defined groups: (1) exchangeable and carbornate, (2) Mn-oxide, (3) Fe-oxyhyd.oxide, and (4) residual fraction. X-ray diffraction result shows that target material were well removed by each extraction step except for CFA in phosphatized crusts generation. According to chemical analysis of each leachate, most of elements in the Fe-Mn crusts are bound with two major phases. Mn, Ba, Co, Ni, Zn, (Fe, Sr, Cu, and V) are strongly bounded with Mn-oxide $({\delta}-MnO_2)$ phase, whereas Fe, Ti, Zr, Mo, Pb, Al, Cu,(V, P, and Zn) show chemical affinity with Fe-oxyhydroxide phase. This result indicates that significant amount of Al, Ti, and Zr can not be explained by detrital origin. Ca, Mg, K, and Sr mainly occur as exchangeable elements and/or carbonate phase. Outermost layer 1 and inner layer 2 which are both young crusts generations are similar in chemical speciations of elements. However, some of Fe-oxyhydroxide bounded elements (Pb, Y, Mo, Ba, Al, and V) in phosphatized innermost layer 3 are released during phosphatization and incorporated into phosphate (Pb, Y, Mo, and Ba) or Mn-oxide phase (Al and V). Our sequential extraction results reveal that chemical speciations of elements in the hydrogenetic crusts are more or less different from interelemental relationship calculated by statistical method based on bulk chemistry.

NTC 서미스터로 응용을 위한 Ni-Mn-Co 산화물의 미세구조와 전기적 특성 (The Microstructural and Electrical Properties of Ni-Mn-Co Oxide for the Application of NTC Thermistors)

  • 김경민;이성갑;권민수;김영곤
    • 한국전기전자재료학회논문지
    • /
    • 제30권6호
    • /
    • pp.361-365
    • /
    • 2017
  • In this paper, we investigated the effect of Co content on the microstructural and electrical properties of $Ni_{0.79}Mn_{2.21-x}Co_xO_4$ (x=0 to 0.25) specimens. Solid-state reaction was used to prepare the bulk specimens. XRD (X-ray diffraction) patterns showed that all compositions had a cubic spinel phase. As a result of the microstructural properties, FE-SEM(field-emission scanning electron microscopy) analysis showed a dense structure, and the mean grain size increased from $5.24{\mu}m$ to $7.33{\mu}m$ with an increase of Co content from x=0 to 0.25. All specimens exhibited the typical NTC thermistor characteristics as the electrical resistance exponentially decreased with increasing temperature. The resistivity and the B-value of $Ni_{0.79}Mn_{1.96}Co_{0.25}O_4$ were $2959{\Omega}{\cdot}cm$ and 3719, respectively.

원자흡수 분광법에 의한 철광석중의 Mn, Co, Ni 및 Cu 의 정량. APDC-MIBK 추출계의 이용 (Determination of Mn, Co, Ni and Cu in Iron Oxide Ore by Atomic Absorption spectroscopy. Utilization of APDC-MIBK Extraction System)

  • 박미선;김연두;고광희
    • 대한화학회지
    • /
    • 제33권3호
    • /
    • pp.315-320
    • /
    • 1989
  • 철광석 중에 존재하는 미량 금속원소들을 분석하는 방법을 제시하였다. 분석방법은 ammonium pyrrolidinedithiocarbamate(APDC)-methyl isobutyl ketone(MIBK) 추출계와 원자흡수 분광법(AA)를 이용하였다. 철이 유기층으로 추출되는 것을 막기 위하여 가리움제로서 코발트, 니켈 및 구리의 분석시에는 pH $8{\sim}10$에서 citrate를, 그리고 망간 및 구리의 분석시에는 pH 6{\sim}7$에서 tiron을 가하였다. MIBK의 물에 대한 용해도를 줄이기 위해 NaCl을 염석제로 가하였다. 금속 추출용액의 안정도를 증가시키기 위한 방안으로 MIBK 금속 추출물을 질산 수용액으로 역추출하는 것을 검토하였다.

  • PDF

IrMn 스핀필터 스페큘라 스핀밸브의 자기저항 특성 (Magnetoresistance of IrMn-Based Spin Filter Specular Spin Valves)

  • 황재연;이장로
    • 한국자기학회지
    • /
    • 제14권6호
    • /
    • pp.236-239
    • /
    • 2004
  • 미소 자유자성층에 인접한 스핀필터층 (SFL; spin filter layer)을 갖는 Ta3/NiFe2/IrMn7/CoFe1/(NOL1)/CoFe2/Cu 1.8/CoFe( $T_{f}$)/Cu( $t_{SF}$ )/(NOL2)/Ta3.5 (두께단위 nm) 구조의 스페큘라 스핀밸브 (SSV; specular spin valve)를 마그네트론 스퍼터링 장치를 사용하여 제작하였다. 반강자성체 I $r_{22}$M $n_{78}$을 속박층으로 한 스핀필터 스페큘라 스핀밸브 (SFSSV; spin filter specular spin valve) 박막에 대하여 자유자성층의 두께 ( $t_{F}$)와 SFL의 두께 ( $t_{SF}$ )가 각각 1.5nm일 때 극대 자기저항 (MR; magnetoresistance)비 11.9%를 얻었으며, $t_{SF}$ 가 1.0nm으로 감소하여도 11%이상의 MR비를 유지하였다. 이것은 나노산화층 (NOL; nano-oxide layer)에 의한 스페큘라 전자와 SFL에 의한 전류분류효과의 증가 때문이다. 또한, 자유자성층과 피속박층 사이의 층간결합장 ( $H_{int}$; interlayer coupling field)은 RKKY력과 정자기결합력으로 설명할 수 있다. 자유자성층의 보자력 ( $H_{cf}$ ; coercivity of the free layer)은 기존의 스핀밸브 (TSV; traditional spin valve)에 비해 현저히 감소했으며, $t_{F}$가 1nm에서 4nm로 변하여도 4 Oe이하의 값을 유지하였다. 따라서 SFL의 삽입으로 자유자성층의 연자성 특성을 떨어뜨리지 않으면서 자유자성층 두께의 감소와 MR비의 향상을 가능하게 하였다.