• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.566-566
• /
• 2013

종래의 흑연 위주 연료전지 분리판에서 최근 고분자 전해질 막 연료전지가 높은 전력, 낮은 작동 온도로 자동차 산업에서 상당한 주목을 받고 있다. 분리판의 기술적 요구사항은 높은 전기 전도도, 높은 내식성, 가스 밀봉성, 경량성, 가공성, 저비용 등이다. 후보 물질로는 전기 전도성을 갖는 질화물계가 고려되고 있다. 기판으로는 스테인레스강이 가장 유력하며 Fe에 첨가된 Ni, Cr이 존재하므로 Cr 또는 CrN를 박막의 형태로 전자빔 증발법, 마그네트론 스퍼터링법으로 고속 증착하려는 시도가 있었다. 본 연구에서는, 스테인리스 강박(0.1 mm 이하)에 보호막으로 CrN을 선택하고 고속, 고품질증착을 위해서 새로운 방법인 스퍼터 승화법을 개발하였다. 박막의 품질을 개선할 수 있는 고밀도 유도 결합 플라즈마 영역 내에 Cr 소스를 직류 바이어스 함으로써 가열 및 스퍼터링이 일어나도록 하였다. 5 mTorr의 Ar 유도 결합 플라즈마를 2.4 MHz, 500 W로 유지하면서 직류 바이어스 전력을 30 W (900 V, 0.02 A) 인가하고, $N_2$의 유량을 0.5, 1.0, 1.5 SCCM로 변화를 주어 반응성 증착 공정의 결과로 얻어지는 CrN 박막의 특성을 분석하였다. N2의 유량이 증가할수록 $Cr_2N$이 감소하고, CrN이 증가하는 것을 확인하였다. 또한 부식성과 접촉저항을 측정하였다. 부식 전위는 N20 SCCM 보다 모두 상승하는 것을 확인하였고, $N_21$ SCCM에서 부식 전류 밀도가 2.097E-6 (at 0.6V) $A/cm^2$로 나타났다. 접촉저항 에서는 시료 당 3군데(top, center, bottom)를 측정하였다. 전기전도도 측면에서 가장 좋은 결과는 $N_21$ SCCM 일 때 $28.8m{\Omega}{\cdot}cm^2$의 접촉저항을 갖는 경우였다. 미국 에너지성의 기준은 부식 전류밀도 1.E-6 $A/cm^2$이하, 접촉 저항 $0.02{\Omega}m^2$이므로 매우 근접한 결과를 보이고 있다.

• Journal of Environmental Health Sciences
• /
• v.20 no.2
• /
• pp.55-63
• /
• 1994

While environmental pollution being developed, there have been some cases that residents on certain parts of Seoul area have cultivated vegetables in a small scale, and consumed the produce of theirs thinking them not polluted. Therefore the need for study about whether those vegetables and soil were polluted was growing. In this study, Seoul area (Tobong-dong, Chang-dong, Wolgyedong, P'il-dong, Oksu-dong, and Karibong-dong) and Kyanggi area (Changhang, P'och'an, Kap'yang, Yangp'y~ng) where pollution was thought to be less severe than that of the former were selected for the sampling area. Cabbage, pumpkin and young pumpkin were sampled and dried to be analyzed the contents of Cd, Cr, Cu, Ni, Pb, Zn, and moisture content was also analyzed. And at the same time 0.1 N-HCl soluble heavy metal content of soil was measured, and the results obtained were descrived as follows. Heavy metal contents of soil in Seoul and Kyonggi were Cd 0.184 ppm, 0.118 ppm, Cr 2.355 ppm, 0.441 ppm, Cu 29.16 ppm, 3.331 ppm, Ni 1.650 ppm, 0.829 ppm, Pb 26.77 ppm, 4.696 ppm, Zn 57.47 ppm, 14.94 ppm respectively. Heavy metal contents of cabbage in Seoul and Kyonggi were Cd 0.407 ppm, 0.241 ppm, Cr 0.388 ppm, 0.402 ppm, Cu 6.853 ppm, 4.486 ppm, Ni 1.479 ppm, 0.878 ppm, Pb 0.812 ppm, 0.258ppm, Zn 112.2 ppm, 54.86ppm respectively. Heavy metal contents of pumpkin in Seoul and Ky6nggi were Cd 0.011 ppm, 0.011 ppm, Cr 0,262 ppm, 0.197 ppm, Cu 3.302 ppm, 2.539 ppm, Ni 0.717 ppm, 0.369 ppm, Pb 0.257 ppm, 0.083 ppm, Zn 28.75 ppm, 14.01 ppm respectively. Correlation between heavy metal contents of soil and those of vegetables was represented high as a whole. In all heavy metals cabbage had higher values of concentrations than those of pumpkin (p<0.001). Concentrations of young pumpkin were higher than those of big pumpkin. It was probably due to the fact that young pumpkin containing not only inner part of pumpkin but also seeds was used as a sample. When classified by region, relatively high concentrations were observed in the samples of Karibong-dong, and in the sample of Jungtang riverside Cd was higher, and in the sample of Namsan Pb was higher than any other district.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.6
• /
• pp.561-568
• /
• 2009

We determined the contents of heavy metals in the muscle of wild and cultured fishes, collected from fish markets located in the eastern (Pohang), western (Gunsan), and southern (Tongyeong) coasts of Korea, from 2004 to 2005. As the results of monitoring the heavy metal contents in spring season, the wild fishes contained the range of Cd (0.01-0.08 mg/kg), Cr (ND-0.28 mg/kg), Cu (0.06-1.53 mg/kg), Hg (0.02-0.16 mg/kg), Mn (0.04-1.15 mg/kg), Ni (ND-0.09 mg/kg), Pb (0.03-0.41 mg/kg), and Zn (1.84-6.61 mg/kg). While for the cultured fishes, Cd (0.01-0.05 mg/kg), Cr (ND-0.17 mg/kg), Cu (0.05-0.61 mg/kg), Hg (0.02-0.13 mg/kg), Mn (0.03-0.17 mg/kg), Ni (ND-0.08 mg/kg), Pb (0.03-0.33 mg/kg), and Zn (2.06-6.20 mg/kg) were contained. In summer season, the contents of heavy metal in the muscle of the wild fishes were as follows: Cd (ND-0.11 mg/kg), Cr (0.01-0.37 mg/kg), Cu (0.21-1.31 mg/kg), Hg (0.01-0.11 mg/kg), Mn (ND-1.47 mg/kg), Ni (ND-0.26 mg/kg), Pb (0.06-0.48 mg/kg), and Zn (2.94-14.38 mg/kg). In comparison, the contents of heavy metal in the muscle of cultured fishes were Cd (ND-0.05 mg/kg), Cr (0.13-0.33 mg/kg), Cu (0.19-0.56 mg/kg), Hg (0.05-0.26 mg/kg), Mn (ND-0.14 mg/kg), Ni (ND-0.58 mg/kg), Pb (0.07-0.45 mg/kg), and Zn (2.43-7.53 mg/kg). Also the fall and the winter season, the heavy metal contents in the fishes showed almost similar with other season, however, Pb was lower and Zn was higher than both spring and summer season. The wild fishes contained the heavy metals a little more than the cultured fishes. We could not observe clear seasonal variation in the heavy metal contents of the fishes. The levels of Hg and Pb in all samples tested did not exceed the maximum permissible levels in the fishes set by the Korean Food & Drug Agency for safe human consumption.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.1
• /
• pp.27-34
• /
• 2001

To investigate the processes governing the distribution of elements in the tidal flat, thirty-eight sediment samples collected from the Saemangeum tidal flat of the Korean west coast were analyzed for their contents of major (Al, Fe, Mg, Ca, Na, K, Ti) and trace (P, Mn, Ba, Sr, V, Cr, Co, Cu, Ni, Zn, Pb) elements. Most elements showed generally lower contents compared to data published for other tidal flats of Korea, and the effect of anthropogenic input could not be recognized in the sediments. The relative abundance and distribution of most of the elements varied significantly with the grain size of sediments. High contents of Al, Fe, Mg, Ti, P, Mn, V, Co, Cr, Cu, Ni and Zn were found in the finer sediments in the upper tidal flat of the study area, suggesting that tidal sedimentation processes play an important role in controlling the distribution of these elements. However, sediment grain size does not impose any significant effect on the abundance and distribution of Ca, Na, K, Ba, Sr and Pb. It appears that the clastic mineralogy in the coarse-grained fractions is the dominant factor determining the distribution of these elements in the study area.

• Imaging Science in Dentistry
• /
• v.53 no.2
• /
• pp.127-135
• /
• 2023

Purpose: This study assessed the intensity of artifacts produced by 2 metal posts, 2 cements, and different exposure parameters using 2 cone-beam computed tomography (CBCT) units. Materials and Methods: The sample was composed of 20 single-rooted premolars, divided into 4 groups: Ni-Cr/zinc phosphate, Ni-Cr/resin cement, Ag-Pd/zinc phosphate, and Ag-Pd/resin cement. Samples were scanned before and after post insertion and cementation using a CS9000 3D scanner with 4 exposure parameters (85/90 kV and 6.3/10 mA) and an i-CAT scanner with 120 kV and 5 mA. The presence of artifacts was assessed subjectively by 2 observers and objectively by a trained observer using ImageJ software. The Mann-Whitney, Wilcoxon, weighted kappa, and chi-square tests were used to assess data at a 95% confidence level(α<0.05). Results: In the subjective analyses, AgPd presented more hypodense and hyperdense lines than NiCr (P<0.05), and more hypodense halos were found using i-CAT (P<0.05) than using CS9000 3D. More hypodense halos, hypodense lines, and hyperdense lines were observed at 10 mA than at 6.3 mA (P<0.05). More hypodense halos were observed at 85 kV than at 90 kV (P<0.05). CS9000 3D presented more hypodense and hyperdense lines than i-CAT (P<0.05). In the objective analyses, AgPd presented higher percentages of hyperdense and hypodense artifacts than NiCr (P<0.05). Zinc phosphate cement presented higher hyperdense artifact percentages on CS9000 3D scans(P<0.05). CS9000 3D presented higher artifact percentages than i-CAT(P<0.05). Conclusion: High-atomic-number alloys, higher tube current, and lower tube voltage may increase the artifacts present in CBCT images.

• Journal of the Korean Ceramic Society
• /
• v.42 no.12 s.283
• /
• pp.816-820
• /
• 2005

The doped-ceria is a strong candidate material for an intermediate temperature SOFC. However, the mechanical strength and the magnitude of electrical conductivity need to be increased at low sintering temperature. In this study, to improve both properties, $1at\% $ of Mg, Ca, Cr, Fe, Co, Ni, Cu, Ga, and Zr were added to the GDC20 ($20at\%$ Gd-doped Ceria) and sintered at $1350^{\circ}C$ that is $250^{\circ}C$ lower than $1600^{\circ}C$. With addition, the relative density of the sintered sample increased. Fe, Co, Ni, Cu, Ga doped-GDC20 showed high relative density over $92\%$. Among them, Ga doped-GDC20 showed the most improved sinterability. The conductivity of doped­GDC20 increased by $\~10$ times at $300\~700^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.81-86
• /
• 2016

The effect of substrate rotation speed on the phase forming behavior and microstructural variation of 8 wt% yttria ($Y_2O_3$) stabilized $ZrO_2$ (8YSZ) coatings as a thermal barrier coating has been investigated. 8YSZ coatings with $100{\sim}200{\mu}m$ thickness were deposited by electron beam-physical vapor deposition onto a super alloy (Ni-Cr-Co-Al) substrate with a bond coating (NiCo-CrAlY). The width of the columnar grains of the 8YSZ coatings increased with increasing substrate rotation speed from 1 to 30 rpm at a substrate temperature range of $900{\sim}950^{\circ}C$. In spite of the different growth behaviors of coatings with different substrate rotation speeds, the phases of each coating were not changed remarkably. Even after post heat treatments with various conditions of the coated specimens fabricated at 20 rpm, only a change of color was noticeable, without any remarkable change in the phase or microstructure.

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.344-347
• /
• 2003

Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2$TaF$_{7}$ as feed material, KCl and KF as a diluent in a stainless steel (SUS) bomb, using the method of metallothermic reduction. And we examined various types of after-treatment that affect the high purification of powder. A significant amount of impurities contained in recovered powder was removed in various conditions of acid washing. In particular, 20% (HCl + HNO$_3$) was effective in removing heavy metal impurities such as Fe, Cr and Ni, 8% H$_2$SO$_4$ + 8% $Al_2$(SO$_4$)$_3$ in removing fluorides such as K and F from non-reactive feed material, and 2% $H_2O$$_2$ + 1 % HF in removing oxides that formed during reaction. Significant amounts of oxygen and part of light metal impurities could be removed through deoxidation and heat treatment process. On the other hand, because it is difficult to remove completely heavy metal impurities such as Fe, Cr, and Ni through acid washing or heat treatment process if their contents are too high, it is considered desirable to inhibit these impurities from being mixed during the reduction process as much as possible.

• Journal of Environmental Health Sciences
• /
• v.20 no.4
• /
• pp.45-52
• /
• 1994

This study was performed to investigate the contents of six heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) with respect to the particle sizes and depths in sediment collected at nine sites of the lower Kumho river. The mean Cd, Cr, Cu, Ni, Pb and Zn contents in sediment of all sites ranged from 1.59~5.32 mg/kg, 17.4~301.7 mg/kg, 23.2~399.9 mg/kg, 9.48~116.8 mg/kg, 31.1~294.1 mg/kg and 74.2~964.3 mg/kg, respectively. The highest heavy metal contents was generally found to be Zn and lowest was Cd. The mean contents of heavy metal by particle sizes (1.0~0.5, 0.5~ 0.25, <0.25 mm)was the highest in particle sizes less than 0.25 mm, but the coefficients of variation was lowest in particle sizes less than 0.25 mm. Mean contents and coefficient of variation by depths (0~5 cm, 5~10 cm, 10~15 cm) were generally found to be higher in the upper parts of sediment than in the lower parts of sediment. Organic substances were found to be higher as the particle sizes become more small. Moreover, contents of heavy metal increased with the amounts of organic substances in sediment.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.20-22
• /
• 2002

Heavy metal level and distribution in sediments and bivalves from the tidal flats along the mid-western coast, Korea, were investigated. The averages of heavy metal concentrations in sediments from 5 sampling sites ranged from 86.35-187.77mg/kg for Mn, 13.25-17.73mg/kg for Zn, 6.80-11.85mg/kg for Cr, 4.28-6.25mg/kg for Ni, 1.85-3.09mg/kg for Cu, 0.004-0.020mg/kg for Cd and 5.70-10.41mg/kg for Pb, respectively. Among the mussels of the limited body size(8.5-11cm), heavy metal concentration both in the flesh and in the whole soft parts were not strongly related to the body size. It was shown that, in S. strictus, Cu moves fast into the flesh after absorption, but Pb and Fe move very slowly. Overally, the heavy metal concentration in the flesh tends to increase with that in the whole soft parts. The concentration factors(heavy metal concentration in S. strictus/heavy metal concentration in sediment) showed that, of the examined metals, Cd is the most cumulative in the body of S. strictus, followed by Zn and Cu, while Mn, Cr, Ni and Pb are not cumulative.