• 한국농공학회논문집
• /
• 제52권6호
• /
• pp.57-62
• /
• 2010

본 연구는 자유수면형 인공습지에서의 시기적인 중금속 제거율의 변동을 평가하기 위하여 수행되었다. 대상 인공습지의 유입수는 하수처리수가 포함된 하천수이다. 인공습지에는 갈대 (Phragmites australis)와 부들 (Typha latifolia)이 주로 분포하며, 이들 두 종은 습지의 95 % 이상을 차지하는 우점종이다. 2009년 5월부터 9월까지 습지의 유입과 유출부분에서 유입수와 유출수를 시료 채취하였다. 채취된 시료는 ICP-AES 방법을 이용하여 6가지 중금속을 분석하였으며, 위해성 평가를 이용하여 카드뮴 (Cd), 크롬 ($Cr^{+6}$), 비소 (As), 납 (Pb), 니켈 (Ni), 구리 (Cu)의 분석 결과를 평가하였다. 위해성평가는 농부와 레크리에이션에 대한 두가지 시나리오를 바탕으로 이루어졌다. 연평균 중금속 제거율은 계절적인 변화 측면에서 큰 변화를 나타내지 않았다. 위해성 평가 결과 시료가 채취된 부분 및 계절적인 변화 대부분에서 US EPA의 기준인 $10^{-4}$를 초과하지 않는 수준으로 허용가능한 수준이었다. 하지만, 봄철 농부에 대한 위해성평가 결과 위해도가 $10^{-4}$ 수준이며, $10^{-6}-10^{-8}$ 수준은 질병의 이동이 우려되는 수준 (US EPA)임을 감안하여, 인공습지에 중금속 농도 저감 시설의 설치를 고려해야 한다. 본 연구에서는 위해성 평가를 가상의 시나리오에 적용하여 평가를 시도함으로서, 수치적인 자료로 제시할 수 있을 뿐만 아니라 중금속의 정량적인 평가를 수행할 수 있었다. 따라서 위해성 평가는 인공습지의 안전성에 대하여 대중과 소통할 수 있는 도구로서 이용할 수 있으며, 인공습지의 효율적인 운영 및 현장 적용에 있어서 스크리닝 도구로서의 역할이 가능할 것으로 판단된다.

• 한국해양학회지
• /
• 제22권3호
• /
• pp.130-142
• /
• 1987

제주남방해역 표층퇴적물에 대해 입도분석, 경광물 및 점토광물, 그리고 미량원소 분석을 실시하였다. 본 연구해역의 퇴적물상은 남동부의 오조립질 분포역 과 남서부 조`세립질 분포지로 구분되며, 남서쪽 끝지역에는 소규모의 현생니질퇴적 물 분포대(mud zone)도 존재한다. 본 역에 분포하는 퇴적물은 분급이 불량하고 negative~positive skewed할뿐 아니라 platykurtic~leptokurtic한 특성을 나타냈으며, 조립질은 도약(saltation)에 의해, 세립질은 도약 및 부유(suspension)에 의해 운반된 것으로 보여 진다. 측정된 13종의 지화학적원소성분중 Co, Ni, Ca, Ag를 제외한 9 종은 남동부지역에서 남서부지역으로 향함에 따라 함량이 증가하는 경향을 보였고, Co와 Ni은 동`서부간에 유사한 함량분포를 나타냈으나 Ca와 Ag은 남동부지역에서 함량치가 높았다. 탄산염함량은 남동부의 조립질 분포역에서가 남서부보다 높게나 타난 반면 총 유기물함량은 이와는 상반된 경향을 보였다. 경광물은 석영, 암편, K- 장석, Na-Ca장석 순의 조성을 보였는데 제주도 주변 해역에서 외해쪽으로 향함에 따라 석영과 K-장석의 함량증가하고 Na-Ca장석과 암편은 감소하는 경향을 나타냈 다. 조사지역 남서쪽 끝 mud 지역의 점토광물로는 illite, chlorite, kaolinite, feldspar, calcite등인데, chlorite가 양적으로 많고 calcite peak가 현저하게 나타날 뿐만 아니라 Ca, Pb, Ni등의 지화학적원소성분의 함량도 황하기원퇴적물의 특성치 와 유사하여 이 지역세립질퇴적물 대부분은 황하기원인 것으로 사료된다.

• 자원리싸이클링
• /
• 제9권5호
• /
• pp.16-21
• /
• 2000

Generation of abnormally large grains in the microstructure of small grains has been investigated on some ferrites. Some fractions of large grains were observed in the microstructue of sintered ZnFe$_2$O$_4$, Mn-ZnFe$_2$O$_4$, Fe$_3$O$_4$(in $N_2$) and MnFe$_2$O$_4$(in air). On the other hand, the large grains were not observed in $NiFe_2$$O_4$ and $CoFe_2$$O_4$, independent of calcining and sintering conditions. The large grains seem to be generated in such ferrites that are easy to very their compositions or valencies at high temperatures. as the sintering proceeded, the number of large grains was increasing to from a continuous structure consisting of large grains, while the size of large grains did not increase remarkably. In addition, the growth of small grains was also very slow during the generation of the large grains. The large grains appeared be suddenly generated after some induction periods. Avrami equation could be applied to the relation between net volume of large grains and sintering time. Thus, the grain boundaries may be strongly stabilized when the large grains are generated. The large grain is generated y the local activation of the stabilized rain boundaries, which is caused by the variation of composition or valencies during sintering. It is concluded that the essence of the abnormal gain growth is not the generation of abnormally large grains, but the abnormal stabilization and the local activation of he grain boundaries.

• 한국환경과학회지
• /
• 제18권5호
• /
• pp.501-508
• /
• 2009

In this study, the characteristics of granular activated carbon (GAC) supported metal was investigated in an area influenced by flame discharge and temperature variation during irradiating microwave. The modified GAC was formulated by impregnating metal hydroxides of nickel (Ni/GAC), barium (Ba/GAC), copper (Cu/GAC), zinc (Zn/GAC), cobalt (Co/GAC) and lanthanum (La/GAC). Ba/GAC was selected as it showed lack of spark discharge and temperature increasing aspects. Comparison of adsorption and desorption amount of GAC and Ba/GAC showed that adsorption and desorption rate of the GAC were higher than those of Ba/GAC. The results show that the presence of barium can decrease adsorption/desorption rate because of plugging pore of GAC. Toluene regeneration rate of Ba/GAC was better than that of GAC due to barium loading. Finally, GAC with barium can be controled a rapid increasing temperature and spark discharge, increased the regeneration rate of toluene during desorption by irradiating microwave.

• 자원환경지질
• /
• 제26권3호
• /
• pp.267-278
• /
• 1993

Serpentinite rocks which are composed mainly of olivine, serpentine and clinopyroxene, cropped out in the anorogenic Kyongsang sedimentary basin of South Korea. The serpentinites contain high content of MgO (36.87~41.99%) and 47~67 ppm Co, 1185~2042 ppm Ni and 979~3582 ppm Cr, which are quite similar to those of ultrabasic rocks such as peridotite and dunite. Isotopic compositions of serpentinites range from -95.5 to -105.7‰ in ${\delta}D$ and +1.7 to 7.1‰ in ${\delta}^{18}O$ corresponding to the continental antigorite type. A wide variation of oxygen isotopic values and $H_2O^+$ content of serpentinites reflect the different water/rock ratios during serpentinization processes. Formation temperature of serpentine minerals are estimated to be unusually high temperature of $488{\sim}646^{\circ}C$ by serpentine-magnetite isotopic fractionation, which belong to continental antigorite type. Calculated ${\delta}^{18}O$ value of serpentinized fluid during serpentinization is suggested that the hydrothermal fluid responsible for serpentinization be originated from the magmatic fluid with a minor influx of paleo-meteoric water in this area.

• 한국재료학회지
• /
• 제14권7호
• /
• pp.477-481
• /
• 2004

High quality polycrystalline silicon is very critical part of the high quality thin film transistor(TFT) for display devices. Metal induced lateral crystallization(MILC) is one of the most successful technologies to crystallize the amorphous silicon at low temperature(below $550^{\circ}C$) and uses conventional and large glass substrate. In this study, we observed that the MILC behavior changed with abrupt variation of the amorphous silicon active pattern width. We explained these phenomena with the novel MILC mechanism model. The 10 nm thick Ni layers were deposited on the glass substrate having various amorphous silicon patterns. Then, we annealed the sample at $550^{\circ}C$ with rapid thermal annealing(RTA) apparatus and measured the crystallized length by optical microscope. When MILC progress from narrow-width-area(the width was $w_2$) to wide-width-area(the width was $w_1$), the MILC rate decreased dramatically and was not changed for several hours(incubation time). Also the incubation time increased as the ratio, $w_1/w_2$, get larger. We can explain these phenomena with the tensile stress that was caused by volume shrinkage due to the phase transformation from amorphous silicon to crystalline silicon.

• 한국재료학회지
• /
• 제19권10호
• /
• pp.533-537
• /
• 2009

This paper presents a new method for the improvement of color temperature without the change of the driving scheme using transparent dielectric layers with various metal oxides (CeO$_2$, Co$_3$O$_4$, CuO, Fe$_2$O$_3$, MnO$_2$, NiO) in plasma display panels (PDP). In this study, we fabricated ZnO-B$_2$O$_3$-SiO$_2$-Al$_2$O$_3$ glasse with various metal oxides and examined the optical properties of these glasses. As the metal oxides were added to the glasses, the visible transmittances of the dielectric layers decreased and the transmittances in special wavelength regions were reduced at different rates. The change of the transmittance in each wavelength range induced the variation of the visible emission spectra and the change of the color temperature in the PDP. The addition of Co$_3$O$_4$ and CuO slightly decreased the intensity of the blue light, but the intensities of the green and the red light were significantly decreased. Therefore, the color temperature can be improved from 6087K to 7378K and 7057K, respectively.

• 한국재료학회지
• /
• 제16권5호
• /
• pp.318-322
• /
• 2006

Short-term high temperature degradation test was conducted on Hastelloy X, a candidate tube material for high temperature gas-cooled reactors (HTGR), to evaluate the variation of microstructure and mechanical property in air at $1050^{\circ}C$ during 2000 h. The dominant oxide layer was Cr-oxide and a very shallow Cr-depleted region was observed below the oxide layer. At the beginning of degradation, the island shape $M_6C$ precipitate (M=Mo-rich, Fe, Ni, Cr) was observed in matrix region. After 2000 h degradation, precipitate shape was changed to the chain shape and increased amount of precipitate. These results influenced mechanical property of the specimen which exposed in high temperature. Yield strength was decreased from 115MPa to 89 MPa after 24 h and 2000 h exposure, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.354-357
• /
• 2002

Thermally grown gate oxide on 4H-SiC wafer was investigated. The oxide layers were grown at l150$^{\circ}C$ varying the carrier gas and post activation annealing conditions. Capacitance-Voltage(C-V) characteristic curves were obtained and compared using various gate electrode such as Al, Ni and poly-Si. The interface trap density can be reduced by using post oxidation annealing process in Ar atmosphere. All of the samples which were not performed a post oxidation annealing process show negative oxide effective charge. The negative oxide effective charges may come from oxygen radical. After the post oxidation annealing, the oxygen radicals fixed and the effective oxide charge become positive. The effective oxide charge is negative even in the annealed sample when we use poly silicon gate. Poly silicon layer was dope by POCl$_3$ process. The oxide layer may be affected by P ions in poly silicon layer due to the high temperature of the POCl$_3$ doping process.

• 대한가정학회지
• /
• 제18권1호
• /
• pp.41-46
• /
• 1980

In order to verify to what extent the rancidity of the soybean oil is occurred and how the various metal ions effect on the rancidity-as a result of applying heat to the soybean oil-the followings are obtained through experiments : 1. From analyzing the refractive index of soybean oil, The results are: the specific gravity-0.925 refractive index-1.475, saponification value-190, acetyl value-5.0, iodine value-120, peroxide value-5.0. 2. The degree of expediting rancidity take the following order : $Cu^{++}$/$Fe^{++}$/$Cr^{++}$/$Zn^{++}$/$Ni^{++}$/$Al^{+++}$. 3. The degree of expediting rancidity of $Cu^{++}$and $Fe^{++}$ is showed the abrubt increase of peroxide value in accordance with the increase of densidity. The most abrubt increase of peroxide show when the duration of heating reaches to the range between 20 minutes and 30 minutes. After heating for 60 minutes no definite variation is showed. 4. The degree of rancidity in heating the soybean oil added $Cu^{++}$, Fe and BHA shows the decrease of peroxide value by 2, 3 after adding $Cu^{++}$0.5 ppm. and heating for 30 minutes. As the result of measuring the value of peroxide after adding $Cu^{++}$ by 1.0 ppm and BHA by 0.01% and heating, peroxide shows the decrease by 7.8 when adding anti-oxidant. $Fe^{++}$ as well as $Cu^{++}$ shows that BHA prevents the metal ions from the expedition of rancidity.