• 공업화학
• /
• 제17권4호
• /
• pp.349-356
• /
• 2006

실리카($SiO_{2}$)지지 루테늄-니켈(Ru/Ni) 합금에 있어서 Ru/Ni 몰함량비와 일산화탄소(CO)의 분압의 변화에 따른 CO의 흡착 및 탈착거동에 대한 연구를 FT-IR을 이용하여 수행하였다. $Ru-SiO_{2}$ 시료에 CO를 흡착시켰을 때 $2080.0cm^{-1}$, $2021.0{\sim}2030.7cm^{-1}$, $1778.9{\sim}1799.3cm^{-1}$, $1623.8cm^{-1}$의 위치에 네 흡수띠가 관찰되었고 진공탈착시 $2138.7cm^{-1}$, $2069.3cm^{-1}$, $1988.3{\sim}2030.7cm^{-1}$의 위치에 세 흡수띠가 관찰되었다. $Ni-SiO_2$ 시료에 CO를 흡착시켰을 때 $2057.7cm^{-1}$, $2019.1{\sim}2040.3cm^{-1}$, $1862.9{\sim}1868.7cm^{-1}$, $1625.7cm^{-1}$의 위치에 네 흡수띠가 관찰되었고, 진공탈착 시켰을 때 $2009.5{\sim}2040.3cm^{-1}$, $1828.4{\sim}1868.7cm^{-1}$의 위치에 두 흡수띠가 관찰되었다. $Ru-SiO_{2}$ 시료와 $Ni-SiO_{2}$ 시료에서 관찰된 IR 스펙트럼은 이전의 보고와 근사적으로 일치한다. Ru/Ni(9/1, 8/2, 7/3, 6/4, 5/5; 몰 함량비)-$SiO_{2}$ 시료에서는 CO를 흡착시켰을 때 $2001.8{\sim}2057.7cm^{-1}$, $1812.8{\sim}1926.5cm^{-1}$, $1623.8{\sim}1625.7cm^{-1}$의 위치에 세 흡수띠가 관찰되었으며, 진공탈착시 $2140.6cm^{-1}$, $2073.1cm^{-1}$, $1969.0{\sim}2057.7cm^{-1}$의 위치에 세 흡수띠가 관찰되었다. Ru/Ni-$SiO_{2}$ 시료에서 CO를 흡착시켰을 때 Ru/Ni의 몰 함량비가 9/1 경우 관찰된 IR 스펙트럼의 모양이 $Ru-SiO_{2}$ 시료에서 CO를 흡착시켰을 때의 모양과 거의 같음이 관찰되었고 Ru/Ni의 몰 함량비가 8/2 보다 작아지면 관찰된 IR 스펙트럼의 모양이 $Ni-SiO_{2}$ 시료에서 CO를 흡착시켰을 때의 모양과 거의 같다. 따라서 Ru/Ni-$SiO_{2}$ 시료 표면에 존재하는 합금 뭉치의 표면에 몰 함량비보다 니켈이 많이 존재한다는 추정이 가능하다. $SiO_{2}$ 지지 Ru/Ni 시료에서 조성의 변화에 따른 CO 흡수띠 파수의 이동을 $SiO_{2}$ 표면에 분산되어 있는 합금뭉치 표면의 조성, 합금뭉치 표면의 조성에 따른 Ru과 Ni 원자의 원자 크기의 차이로 인한 합금뭉치 표면에서 스트레인의 변화, 합금뭉치 표면에서 결합에너지와 전자밀도분포 변화, 합금뭉치 표면에서 표면구조의 변화와 관련이 있음은 분명하다. Ru/Ni 합금결정 표면에서 CO 흡착에 대한 LEED 및 Auger를 이용한 연구, 실리카겔과 Ru/Ni 합금 뭉치와의 상호작용, Ru/Ni 합금 표면에서 CO 흡착에 대한 MO 계산 등의 연구가 진전되어 진다면 이러한 복잡계에 대한 규명에 도움이 될 것으로 보인다.

• 센서학회지
• /
• 제25권3호
• /
• pp.218-222
• /
• 2016

Pure and V-doped NiO porous structures were prepared by the evaporation-induced surfactant assembly and subsequent pyrolysis of assembled structures, and their gas sensing characteristics were investigated. Pure NiO porous structures showed negligible gas responses (S=$R_g/R_a$, $R_g$: sensor resistance in analytic gas; $R_a$: sensor resistance in air) to 5 ppm trimethylamine (S=1.17) as well as other interfering gases such as ethanol, p-xylene, toluene, benzene and formaldehyde (S=1.02-1.13). In contrast, the V-doped NiO porous structures exhibited a high response and selectivity to 5 ppm trimethylamine (S=14.5) with low cross-responses to other interfering gases (S=4.0-8.7) at $350^{\circ}C$. The high gas response of V-doped NiO porous structures to trimethylamine was explained by electronic sensitization, that is, the increase in the chemoresistive variation due to the decrease in the hole concentration. The enhanced selectivity to trimethylamine was discussed in relation to the interaction between basic trimethylamine gas and acidic V catalysts.

• 열처리공학회지
• /
• 제22권6호
• /
• pp.368-374
• /
• 2009

Nickel titanium shape memory alloys (NiTi) have been investigated for applications in the biomedical industry. However, little is known about the influences of surface modifications on the propertise of these alloys. The effect of electropolishing and heat treatments was found to exhibit significant surface roughness. Change of phase was B2, r-phase and B19' by heat treatments. In this study, effect of the electropolishing conditions on surface roughness is investigated in Ni-Ti alloys (Nitinol). Variation in phases with heat treatment temperature is investigated for a Ni-Ti alloy by X-ray diffraction and DSC. Characteristic of the microstructure have been observed by SEM. Surface roughness have been measured by AFM. The results clearly show that significant different in surface property to heat treated at $500^{\circ}C$ (R-phase). $TiO_2$ phases preciritated all of the specimens. It is not good effect of surface roughness because made to surface relief. The surface roughness appears to be important in the property of Ni-Ti alloys for biomedical applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.59-62
• /
• 1996

The effect of NiO addition on the microstructure and microwave dielectric properties of (Zr$_{0.8}$Sn$_{0.2}$)TiO$_4$(ZST) was investigated. With the NiO addition, a dense ZST body of density higher than 95% has been achieved in the sintering temperature range of 1400 to 150$0^{\circ}C$. Energy dispersive X-ray spectrometry (EDS) analysis of sintered specimen shows the presence of second phase at grain boundaries, which is considered to be NiTiO$_3$. Dielectric constant of the specimen is found to increase linearly with density. Q-values and TC$_{f}$decrease with increasing NiO content. The variation of dielectric properties with NiO content is discussed in term of the second phase. The ZST ceramics with small amount of additive gave $\varepsilon$$_{r}$=38, Q=7000 at 7 GHz and TC$_{f}$=-0.5 ppm/$^{\circ}C$, comparable with the values obtained by previous investigation.stigation.

• 한국자기학회지
• /
• 제15권5호
• /
• pp.282-286
• /
• 2005

공침법으로 제조한 Ni-Cu-Zn ferrite를 사용하여 전파흡수체로 사용할 저온소결용 ferrite를 연구하였다. Ni 첨가량에 따른 조성비 및 가소온도와 소결온도 변화를 시켜 전파흡수특성 및 물리적 특성을 고찰하였다. XRD pattern을 통하여 spinel구조를 가짐을 확인하였고, 공침법으로 제조된 Ni-Cu-Zn ferrite 미분말이 나노입자 크기를 보였다 소결온도가 $1100^{\circ}C$이고 Ni 함량이 많을 수록 투자율이 낮고 손실계수도 높게 측정되어 흡수 능력도 좋아짐을 알 수 있고, MHz 영역에서 사용할 수 있다고 사료된다. 그리고 소결온도 $1100^{\circ}C$이고 $(Ni_{0.7}Cu_{0.2}Zn_{0.1}O)_{1.02}(Fe_{2}O_3)_{0.98}$ 조성일 때가 가장 손실이 크므로 전파흡수체로 사용할 조성임을 확인 할 수 있었다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 추계정기총회 및 제26회 학술발표대회 고분자리싸이클링기술 특별심포지엄
• /
• pp.271-275
• /
• 2005

수용액으로부터 중금속의 제거에 소나무수피, 배추, 게 껍질을 이용하였다. 흡착과 이온교환에 의한 중금속의 제거를 조사하기 위해서 시간, 초기농도변화, 흡착제량 변화에 따른 흡착 효율을 조사하고 각각의 실험마다 pH 변화를 측정하였다. 그 결과 배추가 가장 우수한 흡착력을 보였고, 그 다음으로 게 껍질이 우수한 흡착력을 보였다. 특이할 만 한 사항은 배추와 소나무수피의 흡착 실험시 pH는 감소하나 게 껍질의 경우에는 pH가 오히려 증가하는 경향을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1795-1802
• /
• 2005

Potential energy curves and internuclear (M-X) distance variations for dissociation reactions of $[MX_4]^{2-}$ into ($[MX_3]^-$ + $X^-$) have been calculated using ab initio Hartree-Fock (HF), second order M$\ddot{o}$ller-Plesset perturbation (MP2), and Density Functional Theory (DFT) methods with a triple zeta plus polarization (TZP) basis set. The equilibrium geometrical structures of $[MX_4]^{2-}$ are optimized to tetrahedral geometry for $[NiX_4]^{2-}$ and square planar geometry for ($[PdX_4]^{2-}$ and $[PtX_4]^{2-}$). The bond (M-X) distances of $[NiCl_4]^{2-}$, $[NiBr_4]^{2-}$, $[PdCl_4]^{2-}$, $[PdBr_4]^{2-}$, $[PtCl_4]^{2-}$, and $[PtBr_4]^{2-}$ at the DFT level are 2.258, 2.332, 2.351, 2.476, 2.367, and 2.493 $\AA$, respectively. The dissociation energies for the bond dissociation of ($[MX_3]^-$${\cdot}{\cdot}{\cdot}$$X^-$) at the DFT level are found to be 4.73 eV for $[NiCl_4]^{2-}$, 4.89 eV for $[NiBr_4]^{2-}$, 4.93 eV for $[PdCl_4]^{2-}$, 5.57 eV for $[PdBr_4]^{2-}$, 5.44 eV for $[PtCl_4]^{2-}$, and 5.87 eV for $[PtBr_4]^{2-}$. As the (M${\cdot}{\cdot}{\cdot}$X) distance of ($[MX_3]^-$${\cdot}{\cdot}{\cdot}$$X^-$) increases, the distance variation (Rt) of trans (M-X) bond at the trans-position is shorter than those (Rc) of two cis (M-X) bonds at the cisposition. Simultaneously the atomic charge variation of trans-X atom is more positive than those of equilibrium $[MX_4]^{2-}$ structures, while the variation of leaving X group is more positive.

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1215-1218
• /
• 2003

An analysis of the bonding situation in CaM₂P₂ (M=Fe, Ni) with ThCr₂Si₂ structure is made in terms of DOS and COOP plots. The main contributions to covalent bonding are due to M-P and P-P interactions in both compounds. Particularly, the interlayer P-P bonding by variation in the transition metal is examined in more detail. It turns out that the shorter P-P bonds in CaNi₂P₂ form as a result of the decreasing electron delocalization into ${{\sigma}_p}^*$ of P₂ due to the weaker bonding interaction between the metal d and ${{\sigma}_p}^*$ as the metal d band is falling from Fe to Ni.

• Archives of Pharmacal Research
• /
• 제12권3호
• /
• pp.214-218
• /
• 1989

Atmospheric particulate matters (A. P. M. ) were collected on quartz-fiber filters from March 1985 to May 1986, using the Andersen high-volume air sampler and contents of six heavy metals (Fe, Mn, Cu, Zn, Pb Ni) in the A. P. M. were determined by atomic absorption spectrophotometry. These heavy metals were divided into the three groups with respect to their particle size distribution. Fe and Mn were mainly associated with coarse particles (diameter > 2.0 $\mu$m), but Pb and Ni were related fine particles (diameter < 2.0 $\mu$m). Cu and Zn had mized size distributions in both of them. In the seasonal variation of heavy metals, the contents of Fe and Mn in spring and Ni and Pb in winter were higher than any other season. There were high mutual correlation between Fe and Mn coarse particles, and between Pb and Ni in fine particles.

• 열처리공학회지
• /
• 제9권3호
• /
• pp.198-204
• /
• 1996

This work was carried out in order to investigate the effect of grain size on martensitic transformation temperature and morphology of Fe-27%Ni-0.27%C alloy. The martensitic transformation temperature was raised with increasing the austenitizing temperature within the range from $750^{\circ}C$ to $1200^{\circ}C$, owing to the grain growth, vacancy concentration. It was observed that the larger was the austenite grain, the higher was the martensitic transformation temperature. The influence of the austenite grain size was similar to that of the austenitizing temperature. The morphology of martensite in Fe-27%Ni-0.27%C alloy changed from lath to lenticular with the variation of grain size. From the above results, it was concluded that the martensitic transformation temperature and morphology was mainly dependent upon the austenite grain size.