열처리공학회지 (Journal of the Korean Society for Heat Treatment)

  • 제22권6호
  • /
  • Pages.368-374
  • /
  • 2009
  • /
  • 1225-1070(pISSN)
  • /
  • 2508-4046(eISSN)
한국열처리공학회 (The Korean Society for Heat Treatment)
권호 표지

Ni-Ti합금의 표면개질에 미치는 시효처리 온도의 영향

Effect of Aging Treatment Temperature on Surface Modifications in Ni-Ti alloy

  • 박제민 (홍익대학교 과학기술대학 금속공학과) ;
  • 김완철 (홍익대학교 과학기술대학 금속공학과)
  • Park, J.M. (School of Materials Science and Engineering Hongik University) ;
  • Kim, W.C. (School of Materials Science and Engineering Hongik University)
  • 발행 : 2009.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Nickel titanium shape memory alloys (NiTi) have been investigated for applications in the biomedical industry. However, little is known about the influences of surface modifications on the propertise of these alloys. The effect of electropolishing and heat treatments was found to exhibit significant surface roughness. Change of phase was B2, r-phase and B19' by heat treatments. In this study, effect of the electropolishing conditions on surface roughness is investigated in Ni-Ti alloys (Nitinol). Variation in phases with heat treatment temperature is investigated for a Ni-Ti alloy by X-ray diffraction and DSC. Characteristic of the microstructure have been observed by SEM. Surface roughness have been measured by AFM. The results clearly show that significant different in surface property to heat treated at $500^{\circ}C$ (R-phase). $TiO_2$ phases preciritated all of the specimens. It is not good effect of surface roughness because made to surface relief. The surface roughness appears to be important in the property of Ni-Ti alloys for biomedical applications.

키워드

참고문헌

  1. K. Fushimi, M. Stratmann and A. W. Hassel : Electrochimica Acta, 52 (2006) 1290 https://doi.org/10.1016/j.electacta.2006.07.030
  2. G. Fan, W. Chan, S. Yang, J. Zhu, X. Ren, and K. Otsuka : Acta Meterialia, 52 (2004) 4351 https://doi.org/10.1016/j.actamat.2004.06.002
  3. Y. Zhou, G. Fan, J. Zhang, X. Ding, X. Ren, J. Sun, and K. Otsuka : Materials Science and Engineering A, 438-440 (2006) 602 https://doi.org/10.1016/j.msea.2006.02.125
  4. J. Khalil Allafi, X. Ren, and G. Eggeler : Acta Materialia, 50 (2002) 793 https://doi.org/10.1016/S1359-6454(01)00385-8
  5. T. Nishiura, K. Hayashi, and M. Nishida : Materials Science and Engineering A, 481-482 (2008) 446 https://doi.org/10.1016/j.msea.2007.01.181
  6. M. Pohl, C. Hebing, and J. Frenzel : Materials Science and Engineering A, 378 (2004) 191 https://doi.org/10.1016/j.msea.2003.11.080
  7. S. Trigwell, R. D. Hayden, K. F. Nelson and G. Selvaduray : Surf. Interface Anal., 26 (1998) 483 https://doi.org/10.1002/(SICI)1096-9918(199806)26:7<483::AID-SIA388>3.0.CO;2-5
  8. C. L. Chu, C. Guo, X. B. Sheng, Y. S. Dong, P. H. Lin, K. W. K. Yeng, Paul K. Chu : Acta Biomaterialia, 5 (2009) 2238 https://doi.org/10.1016/j.actbio.2009.01.046