• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.99-108
• /
• 2020

In this paper, we analyze the most suitable RA method among PAMA, DAMA, and RA classified by the multiple access method of satellite communication in the rapidly changing traffic environment according to the emergency and tactical situation. It suggests an alternative to improve the limit of output degradation. Based on the CRDSA protocol selected as the standard of DVB-RCS2 among the current satellite communication methods, CRDSA2R (Contention) maintains an optimal RA channel environment by checking the limitations in an environment where packet volume is rapidly increasing and observing channel load and channel conditions. We propose a Resolution Diversity Slotted ALOHA with Adaptive Random Access.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.111-119
• /
• 2015

Smart Grid is a next-generation intelligent grid to optimize energy efficiency by integrating information and communication technologies to the existing power grid as a two-way exchange of information. HPGP communication standard for smart grid implementation has been developed for the emerging smart energy, home automation, electric vehicle communications applications. HPGP communication standard has the advantage of reducing cost and power consumption. Also, it can be interoperated with the previous HPAV communication standard. For the introduction of a new communication standard, the analysis of the reliability and interoperability verification is required. In this paper, we present sniffer test method as reliability test method about power line communication between PEV(Plug-in Electric Vehicle) and EVSE(Electric Vehicle Supply Equipment). Power line communication between PEV and EVSE is one of the most important Smart Gird applications. Also, we analyzed sniffer test results about power line communication based on HPGP between PEV and EVSE by using QCA7000 device, AVitar and Tool kit.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.9-14
• /
• 2011

We have investigated the electrical properties of $AlO_x$ thin film device. The device has been fabricated top-bottom electrode structure and its transport properties are measured in order to study the resistance change. Electrical properties with linear voltage sweep on a electrodes are used to show the variation of resistance of $AlO_x$ thin film device. Fabricated $AlO_x$ thin film device with MIM structure is changed from a high conductive On-state to a low conductive Off-state by the external linear voltage sweep. It is found that the initial resistance of the $AlO_x$ thin film is low-resistance On state and reversible switching occurs. Consequently, we believe $AlO_x$ thin film is a promising material for a next-generation nonvolatile memory and other electrical applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.275-282
• /
• 2017

Revit program is one of the architectural design programs based on the BIM (Building Information Modeling) technology, which is attracting attention as a next-generation three-dimensional architectural design technique. Revit is a program that enhances the information input side and makes it easy to understand components by making it an object called an information family of components from the design stage, but there is no program that easily compares the drawing output files extracted from this program. It is difficult to analyze the changes to the same drawings modified at the time of collaboration and easily share the drawing information. In this paper, we propose and implement a version management system for the output files on the same drawing, so that the parallel collaboration work of output drawing files through Revit can be efficiently performed. We propose an improved KMP algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3370-3392
• /
• 2017

Next Generation Beyond 4G/5G systems will rely on the deployment of small cells over conventional macrocells for achieving high spectral efficiency and improved coverage performance, especially for indoor and hotspot environments. In such heterogeneous networks, the expected performance gains can only be derived with the use of efficient interference coordination schemes, such as Fractional Frequency Reuse (FFR), which is very attractive for its simplicity and effectiveness. In this work, femtocells are deployed according to a spatial Poisson Point Process (PPP) over hexagonally shaped, 6-sector macro base stations (MeNBs) in an uncoordinated manner, operating in hybrid mode. A newly introduced intermediary region prevents cross-tier, cross-boundary interference and improves user equipment (UE) performance at the boundary of cell center and cell edge. With tools of stochastic geometry, an analytical framework for the signal-to-interference-plus-noise-ratio (SINR) distribution is developed to evaluate the performance of all UEs in different spatial locations, with consideration to both co-tier and cross-tier interference. Using the SINR distribution framework, average network throughput per tier is derived together with a newly proposed harmonic mean, which ensures fairness in resource allocation amongst all UEs. Finally, the FFR network parameters are optimized for maximizing average network throughput, and the harmonic mean using a fair resource assignment constraint. Numerical results verify the proposed analytical framework, and provide insights into design trade-offs between maximizing throughput and user fairness by appropriately adjusting the spatial partitioning thresholds, the spectrum allocation factor, and the femtocell density.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.121-127
• /
• 2016

Satellite communication is a communication method using a satellite as a repeater communication on the air and have a communication range is wide and is possible to transmit high-speed data, so Satellite communication has been highlighted as the next generation communication. However, because the distance between the ground and the satellite is far away, there is a disadvantage that propagation delay time is very long and packet is damaged. Therefore, this study was applied to Link Relay H-ARQ system in order to complement the damage to the packet. Furthermore, we propose the Modified Link Relay H-ARQ scheme is a new scheme to supplementation the delay time. By applying the Markov channel for implementing a channel of satellite communications, the results of analyzing the performance, when applying the Link Relay HARQ scheme, BER and PER performance was improved, when applying the Modified Link Relay H-ARQ scheme, Throughput performance was confirmed improvement.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4268-4290
• /
• 2015

Future mobile communications face enormous challenges as traditional voice services are replaced with increasing mobile multimedia and data services. To address the vast data traffic volume and the requirement of user Quality of Experience (QoE) in the next generation mobile networks, it is imperative to develop efficient content distribution technique, aiming at significantly reducing redundant data transmissions and improving content delivery performance. On the other hand, in recent years cloud computing as a promising new content-centric paradigm is exploited to fulfil the multimedia requirements by provisioning data and computing resources on demand. In this paper, we propose a cooperative caching framework which implements State based Content Distribution (SCD) algorithm for future mobile networks. In our proposed framework, cloud service providers deploy a plurality of cloudlets in the network forming a Distributed Cloud Service Network (DCSN), and pre-allocate content services in local cloudlets to avoid redundant content transmissions. We use content popularity and content state which is determined by content requests, editorial updates and new arrivals to formulate a content distribution optimization model. Data contents are deployed in local cloudlets according to the optimal solution to achieve the lowest average content delivery latency. We use simulation experiments to validate the effectiveness of our proposed framework. Numerical results show that the proposed framework can significantly improve content cache hit rate, reduce content delivery latency and outbound traffic volume in comparison with known existing caching strategies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2073-2085
• /
• 2012

Recently, the International Telecommunication Union allocated the 470-862 MHz band to the digital broadcasting (DB) service. Moreover, the 790-862 MHz sub-band will be allocated to the next-generation mobile system, known as the International Mobile Telecommunication - Advanced (IMT-A), and to the DB on a co-primary basis in the year 2015. Currently, two candidate technologies are available to represent the IMT-A system; the Mobile WiMAX and Long Term Evolution - Advanced (LTE-A). One of the main criteria of the IMT-A candidate is to not cause additional interference to the primary service (i.e., DB). In this paper, we address the spectrum sharing issue between the IMT-A candidates and the DB service. More precisely, we investigate the interference effect between the DB service and the mobile network, which could be either LTE-A or WiMAX. Our study proposes a spectrum sharing model to take into account the impact of interference and evaluates the spectrum sharing requirements such as frequency separation and separation distance. This model considers three spectrum sharing scenarios: co-channel, zero guard band, and adjacent channel. A statistical analysis is performed, by considering the interferer spectrum emission mask and victim receiver blocking techniques. The interference-to-noise ratio is used as an essential spectrum sharing criterion between the systems. The model considers the random distribution of the users, antenna heights, and the bandwidth effect as well as the deployment environment in order to achieve spectrum sharing. The results show that LTE-A is preferable to WiMAX in terms of having less interference impact on DB; this can eventually allow the operation of both services without performance degradation and thus will lead to efficient utilization of the radio spectrum.

• Journal of Internet Computing and Services
• /
• v.9 no.4
• /
• pp.61-68
• /
• 2008

Ethernet passive optical network (EPON) is the next-generation technology mitigating the bottleneck between high-capacity local area networks (LANs) and a backbone network. The bottleneck is aggrevated depending on burstiness and long range dependence (LRD) of traffic characteristics as well as amount of outgoing traffic from the high-capacity LANs. The proposed scheme decreases average packet delay for data upstreaming by considering such traffic characteristics to dynamically allocate bandwidth to multiple optical network units (ONUs). In addition, it can appropriately support delay-sensitive traffic such as constant bit ratio (CBR) traffic by making maximum cycle time fix regardless of the number of ONUs. The comprehensive simulation results indicate that the proposed scheme acheives up to 77% and 82% lower than previous schemes in terms of average packet delay and average queue size while it limits the maximum cycle time to twice of the basic cycle time.

• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.121-130
• /
• 2006

In next generation wireless networks, an application must be capable of rating service information in real-time and prior to initiation of the service it is necessary to check whether the end user's account provides coverage for the requested service. However, to provide prepaid services effectively, credit-control should have minimal latency. In an endeavor to support real-time credit-control for Mobile IPv6 (MIPv6), we design an implementation architecture model of credit-control authorization. The proposed integrated model combines a typical credit-control authorization procedure into the MIPv6 authentication procedure. We implement it on a single server for minimal latency. Thus, the server can perform credit-control authorization and MIPv6 authentication simultaneously. Implementation details are described as software blocks and units. In order to verify the feasibility of the proposed model. latency of credit-control authorization is measured according to various Extensible Authentication Protocol (EAP) authentication mechanisms. The performance results indicate that the proposed approach has considerably low latency compared with the existing separated models, in which credit-control authorization is separated from the MIPv6 authentication.