• 천문학회보
• /
• 제40권2호
• /
• pp.27.3-27.3
• /
• 2015

The East Asian Observatory (EAO) was established in 2014 by the East Asian Core Observatories Association (EACOA). The goal of the EAO is to build and operate world-class facilities on behalf of the East Asian regions, as a counterpart to the European Southern Observatory (ESO). Leading astronomical facilities such as ALMA, TMT, GMT, and SKA are mega projects which require enormous economic resources. It is difficult for any observatory or any country to fund such facilities on its own. EAO intends to combine the resources and manpower in our East Asian regions, in order to play a leading role in the next generation frontier instruments. The EACOA institutes: NAOC, NAOJ, KASI, and ASIAA, have authorized the EAO to take on the operations of the James Clerk Maxwell Telescope (JCMT) on Mauna Kea as their first joint venture. In this talk, we will report on the development of EAO, our current operations of JCMT, and our future aspirations.

• 한국염색가공학회지
• /
• 제24권3호
• /
• pp.204-212
• /
• 2012

This study was used a thermogravimetric analyzer to determine thermal characteristics, a hair analysis system to examine morphological changes of wefts-human hair, poly vinyl chloride(PVC) and polyethylene terephthalate (PET)-used in manufacturing wigs. According to a flammability test on human hair and synthetic wefts for wigs, the best results were observed in human hair. According to a thermal test, PET was the best in terms of thermal stability. Also good tensile strength was observed as well. In a scanning electron microscope observation, no human hair scale layer was found because of chemical treatment. In the PVC sample, homogeneous unevenness was observed. Due to a lack of human hair supply and increase in its price, recently, PET weft has emerged as a great substitution for human hair. Because it can be curled using an electric curling device and is more efficient than the conventional non-flammable material PVC in terms of thermal resistance, it will become the next-generation weft for wigs.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.215-219
• /
• 2005

Liquefied petroleum gas (LPG) has been used as motor fuel due to its low emissions and low cost. A liquid direct injection system into a cylinder was suggested as a next generation system to maximize a fuel economy as well as a power. This study addresses the analysis of the LPG spray injecting from single hole injector. Two different test conditions are given, which are a fully developed spray case with various injection pressures and a developing spray case with ambient pressure variation. The LPG spray photographs are compared with the sprays of gasoline and diesel fuel at the same conditions, and the spray angles and penetration lengths are also compared, and then the spray behavior is analyzed. The LPG spray photos show that the dispersion characteristic depends very sensitively on the ambient pressure soon after injection. The spray angle is very wide in a low ambient pressure condition until the saturated pressure, but the angle is quickly reduced at the condition over the pressure. However, the down stream of the LPG spray shows much wider dispersion and less penetration than those of gasoline and diesel sprays regardless ambient pressure condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.369-372
• /
• 2004

Photo-induced surface alignment is charming as a non-contact photo-patternable alignment technology which can be used in the next generation of displays, such as large area, multi-domain. For decades, many polymer film have been investigated and developed to be used in the photo alignment. Among these photoreactive materials, recently developed polyimide, Chloromethylated Polyimide(CMPI) now became the focus of interests in this area because of its high photosensitivity and superior thermal stability. In this report, we present micro patterning method to form the nanoscale structure by Mask-Less laser patterning using this CMPI film and NSOM probe.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.912-915
• /
• 2004

A vacuum environment is very important for NGL(Next Generation Lithography) apparatuses such as EUVL(Extreme Ultra Violet Lithography) or EPL(Electron Projection Lithography) and so on. The performance of these systems is dominated by vacuum level of processing and positioning accuracy of a stage. So, ultra-precision stage usable in a high vacuum level is needed for the improved performance of these devices. In contrast to atmospheric condition, a special attention must be paid to guide bearing, actuator and other elements. In this paper, air bearing is adopted because of its very high motional accuracy. So, air bearing is designed to be vacuum compatible using differential exhaust method, which prevents air from entering into vacuum chamber. For this, leakage analysis is performed theoretically and verified from experiment.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.210-216
• /
• 2008

This paper presents a classical speed controller (CSC) for vector controlled induction motors. The controller explores the use of a Fuzzy Logic controller in a classical form. The controller combines the advantages of the classical controller and the properties of intelligent controllers. The Fuzzy Logic controller idea is used to obtain the CSC output equation, whereby the CSC equation is based on the speed error and its change. The CSC parameters are calculated based on the motor mechanical equation and a predefined system performance. Once the CSC parameters are obtained, the defined speed performance can be achieved at all operating conditions. The application of the CSC to control the speed of a vector controlled induction motor is presented. Different induction motor ratings are used. Simulation results in all possible olperating conditions are presented. Results show that the CSC behaves as an expert controller to provide the predefined speed performance in all possible operating conditions. Based on the results obtained in this paper, the CSC is expected to become the ultimate solution for high-performance drives of the next generation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.486-487
• /
• 2011

In this paper, a configurable DC distributiong system is being proposed considering national power systems conditions and a comparative analysis of the transient response of the contingencies is performed with the conventional AC systems. DC systems are evaluated as a promising next-generation distribution system that provides reliable operation through high efficiency of energy use and converter control. This paper discusses about the required elements for the national DC distribution system and has analysed the fault characteristics of the AC and DC distribution systems using PSCAD/EMTDC. According to the simulation results, the DC system has improved response, due to the DC/DC converter's charging/discharging characteristics, in terms of voltage and power system characteristics when compared to AC systems.

• 전력전자학회논문지
• /
• 제6권3호
• /
• pp.291-298
• /
• 2001

본 논문은 차세대 FACTS(flexible AC Transmission Systems)기술인 UPFC(Unified Power Flow Controller)의 시뮬레이션을 다룬다. UPFC의 해석과 모델을 통하여 전력조류제어를 시뮬레이션 한다. 전력시스템의 과도상태 및 제어에 대한 시간영역 시뮬레이션 프로그램인 EMTDC(Electro-Magnetic Transients in DC systems)를 사용하여 전력조류제어인 유효전력 및 무효전력제어를 수행하고 더불어 모선입력전압의 크기를 제어한다. 시뮬레이션 결과를 통하여 UPFC의 제어성능을 검증한다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.459-463
• /
• 2007

Overlay multicast is an emerging technology for next generation Internet service to various groups of multicast members. It will take the place of traditional IP multicast which is not widely deployed due to the complex nature of its technology. The overlay multicast which effectively reduces processing at IP routers can be easily deployed on top of a densely connected IP network. An end-to-end delay problem is considered which is serious in the multicast service. To periodically optimize the route in the overlay network and to minimize the maximum end-to-end delay, overlay multicast tree is investigated with genetic Algorithm. Outstanding experimental results are obtained which is comparable to the optimal solution and the tabu search.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.561-564
• /
• 2007

FCEV uses electric energy which generated from the reaction between Hydrogen and Oxygen in fuel cell stack as driving force. As fossil fuels are exhausted, fuel cell is regarded as a potent substitute for next generation energy source, and thus, most of car-makers make every efforts to develop fuel cell electric vehicle (FCEV). In addition, fuel cell is also beneficial in aspect of environment, because only clean water is produced during chemical reaction process instead of harmful exhausted gas. Generally, Hydrogen is supplied from high-pressured fuel tank, and air blower (or compressor) supply Oxygen by pressurizing ambient air. Air blower which is driven by high speed motor consumes about $7{\sim}8$ % of energy generated from fuel cell stack. Therefore, the efficiency of an air blower is directly linked with the performance of FCEV. This study will present the development process of an air blower and its consisting parts respectively.