• Title/Summary/Keyword: Next generation

Search Result 5,373, Processing Time 0.033 seconds

Plant Community Structure of Abies holophylla Community from Sinseongam to Jungdaesa in Odaesan National Park (오대산국립공원 신성암~중대사 전나무림 식물군집구조 특성)

  • Kim, Dong-Wook;Han, Bong-Ho;Kim, Jong-Yup;Yeum, Jung-Hun
    • Korean Journal of Environment and Ecology
    • /
    • v.29 no.6
    • /
    • pp.895-906
    • /
    • 2015
  • This study was carried out to the structure of plant community from Sinseongam to Jungdaesa in Odaesan National Park, furthermore, it seeks to curate the basic data for planning of the Abies holophylla's forest management in Odaesan National Park. In order to identify the current ecological environment, this study explored the actual vegetation as primary research and set to twenty plots(i.e. $400m^2$) for analysing detailed structure of plant communities. The research methodology was qualitative analysis, therefore it used TWINSPAN and DCA analysis tools. Especially, TWINSPAN performed well in several comparisons of classification techniques, DCA is one of the ordination technique showed that the plant communities. The plant community was analysed classification and ordination by TWINSPAN and DCA, moreover it was analysed the structure of plant community such as importance percentage of woody species, DBH class distribution, the index of diversity and rate of sample tree growth. The main vegetation was A. holophylla-Quercus mongolica forest and Deciduous broad-leaved forest in the communities where located in low altitude and valley, whereas main vegetation where located in high altitude and slope was Q. mongolica forest. The research site's plant communities were classified four groups. In all of communities, A. holophylla was dominant species in main canopy layer, furthermore, the three communities (community I, II, III) are growing up next generation of A. holophylla excluding community IV. The communities (community I, II, III) can be sustained current status which dominates the A. holophylla communities, simultaneously, there might be expanded the Deciduous broad-leaved communities by Carpinus cordata, Betula schmidtii and so on. While, it showed that the community IV tended to be weaken the forces of A. holophylla, therefore the community IV can be transferred to C. cordata-Deciduous broad-leaved communities in the future. The age of sample trees was 79~128(i.e. A. holophylla), 75~87(i.e. Pinus koraiensis) and 190 years(i.e. Ulmus davidiana var. japonica). The index of Shannon's Species diversity (H') were ranged from 0.3889 to 1.3332 in the communities.

Analysis of rpoB Gene in Rifampin-Resistant M. Tuberculosis by Direct Sequencing and Line Probe Assay (염기서열결정과 Line Probe 분석법에 의한 Rifampin내성 결핵균의 rpoB 유전자 분석)

  • Lee, Min-Ki;Kim, Yun-Seong;Lee, Hyo-Jin;Cheon, Du-Su;Yun, Sang-Myung;Park, Sam-Seok;Kim, Cheol-Min;Park, Soon-Kew
    • Tuberculosis and Respiratory Diseases
    • /
    • v.44 no.2
    • /
    • pp.251-263
    • /
    • 1997
  • Background : The emergence of multidrug-resistant strains of Mycobacterium tuberculosis presents a significant challange to the treatment and control of tuberculosis, and there is an urgent need to understand the mechanisms by which strains acquire multidrug resistance. Recent advances in molecular methods for the detection of M. tuberculosis genetic targets have approached the sensitivity of culture. Furthermore the prospect of determining resistance in mycobacteria at the nucleic acid level particulary to first-line drugs like rifampin, isoniazid has provided a glimps of the next generation of sensitivity test for M. tuberculosis. Previous studies in RMP resistant M. tuberculosis have shown that mutation in $\beta$subunit of RNA polymerase is main mechanism of resistance. Method : In this study, rpoB gene for the $\beta$subunit of RNA polymerase from M. tuberculosis of 42 cultured samples (32 were RMP resistant and 10 were sensitive cases) were isolated and characterised the mutations. Direct sequencing data were compared with the results of INNO-LiPA Line Probe Assay (LiPA, Innogenetics, Belgium), commercial RMP resistance detecting kit using reverse hybridization method. Results : All of the RMP resistant samples were revealed the presence of mutation by LiPA. In 22 samples (68.8%) out of 32 RMP resistant cases, the mutation types were confirmed by the positive signal at one of 4 mutation bands in the strip. The most frequent type was R5 (S531L) which were 17 cases (77.3%). Results of direct sequencing were identified the exact characteristics of 8 mutations which were not confirmed by LiPA. S522W type point mutation and 9 base pair deletion at codon 513~515 were new identified mutations for the first time. Conclusion : Mutations in rpoB gene is the main mechanism of RMP resistance in M. tuberculosis and LiPA is a very useful diagnostic tool for the early diagnosis of RMP resistance in M. tuberculosis.

  • PDF

The study of stereoscopic editing process with applying depth information (깊이정보를 활용한 입체 편집 프로세스 연구)

  • Baek, Kwang-Ho;Kim, Min-Seo;Han, Myung-Hee
    • Journal of Digital Contents Society
    • /
    • v.13 no.2
    • /
    • pp.225-233
    • /
    • 2012
  • The 3D stereoscopic image contents have been emerging as the blue chip of the contents market of the next generation since the . However, all the 3D contents created commercially in the country have failed to enter box office. It is because the quality of Korean 3D contents is much lower than that of overseas contents and also current 3D post production process is based on 2D. Considering all these facts, the 3D editing process has connection with the quality of contents. The current 3D editing processes of the production case of are using the way that edits with the system on basis of 2D, followed by checking with 3D display system and modifying, if there are any problems. In order to improve those conditions, I suggest that the 3D editing process contain more objectivity by visualizing the depth data applied in some composition work such as Disparity map, Depth map, and the current 3D editing process. The proposed process has been used in the music drama , comparing with those of the film . The 3D values could be checked among cuts which have been changed a lot since those of , while the 3D value of drew an equal result in general. Since the current process is based on an artist's subjective sense of 3D, it could be changed according to the condition and state of the artist. Furthermore, it is impossible for us to predict the positive range, so it is apprehended that the cubic effect of space might be perverted by showing each different 3D value according to cuts in the same space or a limited space. On the other hand, the objective 3D editing by applying the visualization of depth data can adjust itself to the cubic effect of the same space and the whole content equally, which will enrich the 3D contents. It will even be able to solve some problems such as distortion of cubic effect and visual fatigue, etc.

Molecular Phylogenetic Study of the Endangered Land Snail Satsuma myomphala Based on Metallothionein Gene. (Metallothionein 유전자를 기초로 한 멸종위기 육상 달팽이 Satsuma myomphala (거제외줄달팽이) 의 분자계통학적 연구)

  • Sang, Min Kyu;Kang, Se Won;Hwang, Hee-Ju;Chung, Jong Min;Song, Dae Kwon;Min, Hye Rin;Park, Jie Eun;Ha, Hee Cheol;Lee, Hyun Jun;Hong, Chan Eui;Ahn, Young Mo;Park, So Young;Park, Young-Su;Park, Hong Seog;Han, Yeon Soo;Lee, Jun Sang;Lee, Yong Seok
    • The Korean Journal of Malacology
    • /
    • v.32 no.4
    • /
    • pp.263-268
    • /
    • 2016
  • Metallothionein (MT) family of metal-binding proteins are involved in maintaining homeostasis and heavy metal poisoning. Recently, MT has been considered as a biomarker that can identify a particular species, very similar to the use of cytochrome oxidase I (COI) gene. Satsuma myomphala species of land snails have been reported from North-East Asia, including South Korea and Japan. In particular, the land snail species have been known from only a limited area of Geoje Island, Gyeongsangnam-do province of South Korea. Genetic studies of S. myomphala has been limited with only 6 nucleotide, 2 protein registered on the NCBI server. For elucidating the genetic information of S. myomphala, we conducted RNA sequencing analysis using Illumina HiSeq 2500 next-generation platform. We screened the MT gene from the RNA-Seq database to confirm the molecular phylogenetic relationship. After sequencing, the de novo analysis and clustering generated 103,774 unigenes. After annotation against PANM database using BLAST program, we obtained MT sequence of 74 amino acid residues containing the coding region of 222 bp. Based on this sequence, we found about 53 sequences using the BLAST program in NCBI nr database. Using ClustalX alignment, Maximum-Likehood Tree of MEGA program, we confirmed the molecular phylogenetic relationships that showed similarity with mollusks such as Helix pomatia and H. aspersa, Megathura crenulata.

Comparison of microbial community profiling on traditional fermented soybean products (Deonjang, Gochujang) produced in Jeonbuk, Jeonnam, and Jeju province area (제주·호남권 전통된장과 고추장의 미생물 군집구조의 분석)

  • Cho, Sung Ho;Park, Hae Suk;Jo, Seung Wha;Yim, Eun Jung;Yang, Ho Yeon;Ha, Gwang Su;Kim, Eun Ji;Yang, Seung Jo;Jeong, Do Yeon
    • Korean Journal of Microbiology
    • /
    • v.53 no.1
    • /
    • pp.39-48
    • /
    • 2017
  • In order to evaluate the diversity of microbial population of Korean traditional Deonjang and Gochujang produced in Jeju, Jeonnam, and Jeonbuk province area, microbial communities were analyzed using next generation sequencing. In this result, the dominant bacteria of Deonjang in three area were Bacillus amyloliquefaciens, Tetragenococcus halophilus, and Bacillus was major dominant bacteria in Jeonnam (43.16%) and Jeonbuk (64.54%) area. But in Jeju area, Bacillus was 0.22%, which was significantly different from the other two. Equally, the dominant fungi of Deonjang in 3 area were Candida versatilis. Common fungus in Jeonnam and Jeonbuk area was Candida sp., respectively, 64.22% and 33.68% and Micor sp. was a common fungus in Jeonnam (15.66%) and Jeonbuk area (36.73%). But in Jeju area, Candida sp. and Zygosaccharomyces rouxii were dominant than mold. Bacillus subtilis, Bacillus licheniformis, and B. amyloliquenfaciens were the preminant bacteria in the traditional Gochujang in three regions. But there were no common dominant fungi in the 3 regions. Aspergillus sp. and Rhizopus sp. prevailed in Jeju and Jeonnam region, and Zygosaccharomycess rouxii predominanted in Jeonbuk area. These results suggested that the difference in the samples collected for the study were classified into similar groups according to the characteristics of each sample rather than regional characteristics.

Preparation of $SrTiO_3$ Thin Film by RF Magnetron Sputtering and Its Dielectric Properties (RF 마그네트론 스퍼터링법에 의한 $SrTiO_3$박막제조와 유전특성)

  • Kim, Byeong-Gu;Son, Bong-Gyun;Choe, Seung-Cheol
    • Korean Journal of Materials Research
    • /
    • v.5 no.6
    • /
    • pp.754-762
    • /
    • 1995
  • Strontium titanate(SrTiO$_3$) thin film was prepared on Si substrates by RF magnetron sputtering for a high capacitance density required for the next generation of LSTs. The optimum deposition conditions for SrTiO$_3$thin film were investigated by controlling the deposition parameters. The crystallinity of films and the interface reactions between SrTO$_3$film and Si substrate were characterized by XRD and AES respectively. High quality films were obtained by using the mixed gas of Ar and $O_2$for sputtering. The films were deposited at various bias voltages to obtain the optimum conditions for a high quality file. The best crystallinity was obtained at film thickness of 300nm with the sputtering gas of Ar+20% $O_2$and the bias voltage of 100V. The barrier layer of Pt(100nm)/Ti(50nm) was very effective in avoiding the formation of SiO$_2$layer at the interface between SrTiO$_3$film and Si substrate. The capacitor with Au/SrTiO$_3$/Pt/Ti/SiO$_2$/Si structure was prepared to measure the electric and the dielectric properties. The highest capacitance and the lowest leakage current density were obtained by annealing at $600^{\circ}C$ for 2hrs. The typical specific capacitance was 6.4fF/$\textrm{cm}^2$, the relative dielectric constant was 217, and the leakage current density was about 2.0$\times$10$^{-8}$ A/$\textrm{cm}^2$ at the SrTiO$_3$film with the thickness of 300nm.

  • PDF

Characteristics of Flexible Transparent Capacitive Pressure Sensor Using Silver Nanowire/PEDOT:PSS Hybrid Film (은나노와이어·전도성고분자 하이브리드 필름을 이용한 유연 투명 정전용량형 압력 센서의 특성)

  • Ahn, Young Seok;Kim, Wonhyo;Oh, Haekwan;Park, Kwangbum;Kim, Kunnyun;Choa, Sung-Hoon
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.23 no.3
    • /
    • pp.21-29
    • /
    • 2016
  • In this paper, we developed a flexible transparent capacitive pressure sensor which can recognize X and Y coordinates and the size of force simultaneously by sensing a change in electrical capacitance. The flexible transparent capacitive pressure sensor was composed of 3 layers which were top electrode, pressure sensing layer, and bottom electrode. Silver nanowire(Ag NW)/poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) hybrid film was used for top and bottom flexible transparent electrode. The fabricated capacitive pressure sensor had a total size of 5 inch, and was composed of 11 driving line and 19 sensing line channels. The electrical, optical properties of the Ag NW/PEDOT:PSS and capacitive pressure sensor were investigated respectively. The mechanical flexibility was also investigated by bending tests. Ag NW/PEDOT:PSS exhibited the sheet resistance of $44.1{\Omega}/square$, transmittance of 91.1%, and haze of 1.35%. Notably, the Ag NW/PEDOT:PSS hybrid electrode had a constant resistance change within a bending radius of 3 mm. The bending fatigue tests showed that the Ag NW/PEDOT:PSS could withstand 200,000 bending cycles which indicated the superior flexibility and durability of the hybrid electrode. The flexible transparent capacitive pressure sensor showed the transmittance of 84.1%, and haze of 3.56%. When the capacitive pressure sensor was pressed with the multiple 2 mm-diameter tips, it can well detect the force depending on the applied pressure. This indicated that the capacitive pressure sensor is a promising scheme for next generation flexible transparent touch screens which can provide multi-tasking capabilities through simultaneous multi-touch and multi-force sensing.

Assessment of Growth Conditions and Maintenance of Law-Protected Trees in Je-cheon City (제천시 보호수의 생육환경 및 관리현황 평가)

  • Yoon, Young-Han;Ju, Jin-Hee
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.28 no.2
    • /
    • pp.67-74
    • /
    • 2010
  • Law-protected trees are our precious asset as natural resources with history and tradition and natural heritage which should be protected and maintained well to bequeath next generation. Law-protected trees have not only thremmatologic and genetic meaning but also environmental and emotional meaning for their value to be high. This study investigated location, vitality, wrapping condition of root area and status of maintenance of the trees to figure out their growth environment and status of maintenance in a small-middle city through survey on those of law-protected trees in Je-cheon. There showed 300 more year old trees in Je-cheon mostly and the number of trees located in flat fields was the highest. For location type, village, hill and road types were presented in the order and for degree of development, land for building was found most frequently. The average electric resistance of the formative layer was measured to be $8.4k{\Omega}$ and four trees showed bark separation. Most law-protected trees underwent tree surgery, and complete bareness of root area was observed in a tree. The root area of two trees was covered with concrete. pH of soil was recorded to be 5.0~8.4 with its average of 7.1 and electric conductivity(EC) was less than 0.5 dS/m. For status of maintenance rearing facilities were placed for 16 trees out of totally 48 ones and stone fence was done for three ones. Tree surgery was conducted for 33 trees to prevent and to treat decomposed parts of holes. Direction boards were installed for 23 trees. Based on these results, measures to manage systematically law-protected trees in Jecheon could be suggested as follows. First, a sufficient space for growth of low part of trees should be secured. Second, a voluntary management should be induced by advertising them to residents in a community. Third, rearing facilities and direction boards of law-protected trees should be placed and related education should be conducted. Fourth, through operation of the department for law-protected trees consisting of related professions and cooperation among related departments the trees should be maintained continuously.

Sensitivity Analysis for CAS500-4 Atmospheric Correction Using Simulated Images and Suggestion of the Use of Geostationary Satellite-based Atmospheric Parameters (모의영상을 이용한 농림위성 대기보정의 주요 파라미터 민감도 분석 및 타위성 산출물 활용 가능성 제시)

  • Kang, Yoojin;Cho, Dongjin;Han, Daehyeon;Im, Jungho;Lim, Joongbin;Oh, Kum-hui;Kwon, Eonhye
    • Korean Journal of Remote Sensing
    • /
    • v.37 no.5_1
    • /
    • pp.1029-1042
    • /
    • 2021
  • As part of the next-generation Compact Advanced Satellite 500 (CAS500) project, CAS500-4 is scheduled to be launched in 2025 focusing on the remote sensing of agriculture and forestry. To obtain quantitative information on vegetation from satellite images, it is necessary to acquire surface reflectance through atmospheric correction. Thus, it is essential to develop an atmospheric correction method suitable for CAS500-4. Since the absorption and scattering characteristics in the atmosphere vary depending on the wavelength, it is needed to analyze the sensitivity of atmospheric correction parameters such as aerosol optical depth (AOD) and water vapor (WV) considering the wavelengths of CAS500-4. In addition, as CAS500-4 has only five channels (blue, green, red, red edge, and near-infrared), making it difficult to directly calculate key parameters for atmospheric correction, external parameter data should be used. Therefore, thisstudy performed a sensitivity analysis of the key parameters (AOD, WV, and O3) using the simulated images based on Sentinel-2 satellite data, which has similar wavelength specifications to CAS500-4, and examined the possibility of using the products of GEO-KOMPSAT-2A (GK2A) as atmospheric parameters. The sensitivity analysisshowed that AOD wasthe most important parameter with greater sensitivity in visible channels than in the near-infrared region. In particular, since AOD change of 20% causes about a 100% error rate in the blue channel surface reflectance in forests, a highly reliable AOD is needed to obtain accurate surface reflectance. The atmospherically corrected surface reflectance based on the GK2A AOD and WV was compared with the Sentinel-2 L2A reflectance data through the separability index of the known land cover pixels. The result showed that two corrected surface reflectance had similar Seperability index (SI) values, the atmospheric corrected surface reflectance based on the GK2A AOD showed higher SI than the Sentinel-2 L2A reflectance data in short-wavelength channels. Thus, it is judged that the parameters provided by GK2A can be fully utilized for atmospheric correction of the CAS500-4. The research findings will provide a basis for atmospheric correction of the CAS500-4 in the future.

21st Century ROK's Art History Research on Central Eurasia (21세기 한국의 중앙유라시아 미술사 연구)

  • Lim, Young-ae
    • Korean Journal of Heritage: History & Science
    • /
    • v.48 no.3
    • /
    • pp.186-203
    • /
    • 2015
  • This article attempts to examine both the outcome and future task of the art history research on Central Eurasia, better known under the name of "Silk Road". The term Central Eurasia encompasses Xinjiang Uygur, Tibet, Mongolia, former Soviet Republics, the northwest region of India, Iran and Turkey. The article analyzes the 30-year history of the region's art history research and further presents a desirable direction that the study should move towards. Though short in its research period, the ROK's art history study on Central Eurasia has shown eye-catching achievement in several areas such as the northwest region of India and the Xinjiang Uygur, Dunhwang of China. Two factors allowed for this accomplishment. First was the actual improvement of the work environment, where the scholars were finally able to travel to Central Eurasia and explore the historic sites for themselves since 1990. More important was the 'arena of study' for the next-generation scholars made possible by institutions like The Korean Association for Central Asian Studies and the Center for Central Eurasian Studies. Slowly but consistently, the two academic societies induced scholars' attention towards the field and fostered new experts. Circumstances changed, marking 2012 as the starting point. International academic forums held by the government branches surged in number. The intention behind it was to link the ROK with the Silk Road and ultimately to obtain the "Eurasia initiative". As of now, the public has shown heightened interest in the issue. The academia is subsequently riding on this second "wave of interest" following the first wave in the 1980s. However, increased popularity comes with some negative consequences, and this art history research on Central Eurasia is no exception. There are criticisms regarding the objectivity of recent academic forums. Some argue that the aim of the forums are sternly set most of the times, prohibiting the presenters to voice their own perspectives. Still, this heated attention will definitely play its role as a stepping stone for further development. The academia should commit to fostering rising researchers who will systemically and professionally study the field. This is imperative in order for the Korean culture to successfully communicate with the world and take itself to a new level. Without completing this task, the ROK's art history research on Central Eurasia is likely to remain idle.