• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.73-78
• /
• 2004

In this research, the photoelastic experimental hybrid method with Hook-Jeeves numerical method has been developed: This method is more precise and stable than the photoelastic experimental hybrid method with Newton-Rapson numerical method with Gaussian elimination method. Using the photoelastic experimental hybrid method with Hook-Jeeves numerical method, we can separate stress components from isochromatics only and stress intensity factors and stress concentration factors can be determined. The photoelastic experimental hybrid method with Hook-Jeeves had better be used in the full field experiment than the photoelastic experimental hybrid method with Newton-Rapson with Gaussian elimination method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.307-310
• /
• 2008

Nonlinear Vortex Strength Correction Method is developed for improvement of vortex lattice method which can't calculate the separated flow conditions and the viscous effect. In this method, the vortex strength on the blade surface is determined by matching the lift force from vortex lattice method with the lift force from aerodynamic coefficients table as the same circulation is added to or subtracted from all chord wise vortices. For considering the nonlinearities due to the neighboring blade sections, sophisticated Newton-Rapson algorithm is applied. The validation of this method was done by comparing the simulations with the measurements on the NREL Phase-VI horizontal axis wind turbine(HAWT) in the NASA Ames wind tunnel under uniform conditions. This method gives good agreements with experiments in most cases.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.285-286
• /
• 2002

The lubricating characteristics of negative pressure slider were performed by using divergence formulation method with the coordinate transformation method. This method makes it possible to deal with an arbitrary configuration of a lubricated surface. The pressure profile of the slider is calculated. These results are compared to that from direct numerical method. The steady-state, including minimum film thickness, pitching and rolling angle are calculated by multi-dimensional Newton-Rapson method. The stiffness and damping characteristics are also calculated.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.339-344
• /
• 2000

This paper presents an improved optimal power flow algorithm, which solves an optimization problem with equality constraints with converted inequality constraints. The standard OPF and the penalty function method should do reconstructing active constraints among the inequality constraints so that the activation of the inequality constraints has been imposing an additional burden to solve OPF problem efficiently. However the proposed algorithm converts active inequality constraints into the equality constraints in order to preclude us from reconstructing the procedures. The effectiveness of the new OPF algorithm is validated by applying the IEEE 14 bus system.

• 전산구조공학
• /
• 제10권4호
• /
• pp.217-228
• /
• 1997

p-version 유한요소법에 의한 고정밀해석은 응력특이가 발생하는 선형탄성 문제에 매우 적합한 방법으로 인식되고 있다. 해석 결과의 정확도, 모델링의 단순성, 입력자료에 대한 통용성 및 사용자와 CPU 시간의 절감 등 여러장점이 선형탄성 문제에 적용되어 우수성이 입증되었지만, 탄소성 해석분야는 아직 적용이 이루어지지 않고 있다. 그러므로 본 논문에서는 일-경화재료에 대한 구성방정식을 이용하여 정식화된 증분소성이론과 소성유동법칙에 근거한 재료비선형 p-version 유한요소모델이 제안되었다. 비선형방정식을 풀기 위해 Newton-Raphson법과 초기강성도법 등의 반복법이 모색되었다. 제안된 모델을 이용하여 개구부를 가진 사각형 평판과 내압을 받는 두꺼운 실린더, 그리고 등분포하중을 받는 원판해석 등의 수치실험이 수행되었다. 한편, p-version 모델에 의한 해석결과는 문헌의 이론값과 상용유한요소프로그램인 ADINA의 해석결과와 비교 검증되었다.

• Tribology and Lubricants
• /
• 제22권6호
• /
• pp.320-328
• /
• 2006

In this study, the simulation of rolling contact fatigue based on stress analysis is conducted under Elastohydrodynamic Lubrication state. To predict a crack initiation life accurately, it is necessary to calculate contact stress and subsurface stresses accurately. Contact stresses are obtained by contact analysis of a semi-infinile solid based on the use of influence functions and the subsurface stress field is obtained using rectangular patch solutions. And a numerical algorithm using Newton-Rapson method was constructed to calculate the Elastohydrodynamic lubrication pressure. Based on these stress values, several multiaxial high-cycle fatigue criteria are used and the critical loads corresponding to fatigue limits are calculated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1300-1305
• /
• 2001

One of the main noise sources in cabin onboard ships is HVAC system. Up to now, the HVAC system designer manually calculates the HVAC system noise, or uses the program that is generally based on text user interface. In such a case, it is difficult to use the program and also to obtain the flow induced noise. In this study, the HVAC noise analysis program has been developed, which is based on GUI user interface that include 3.D modelling and model modification modules. For calculation of the insertion loss of HVAC system elements, NEBB experimental data and plane wave theory are used. And in order to obtain the flow rate information in each HVAC elements which is used to calculate the flow induced noise calculation, Global Converging Newton-Rapson Method is used.