• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.1366-1370
• /
• 2004

한강은 남한 제1의 하천으로 지리적으로 한반도의 중심부에 위치하여 동에서 서로 흐르는 대하천이다. 매년 발생하는 홍수에 대한 한강하류부의 홍수관리는 대단히 중요하다. 본 연구는 한강의 지천유입량이 한강본류 수위에 미치는 영향을 수리학적 홍수추적 모형을 이용하여 분석하였다. 수리학적 홍수추적 모형은 하천의 지형적 특성과 여러인자들을 반영하여 하천의 흐름을 해석하기 때문에 하천에 설치되어 있는 교량, 수중보, 지천유입량, 조도계수 등을 적절히 반영하였을 때 보다 정확한 결과를 얻을 수 있다. 본 연구에서는 1차원 부정류 흐름으로 해석하였으며 미국 NWS(National Weather Service)에서 기존의 DWOPER 모형과 댐파괴 모형인 DAMBRK 모형을 통합하여 개선한 FLDWAV 모형을 사용하였다. 이 모형의 지배방정식은 연속방정식과 운동량방정식으로 구성되어 확장된 Saint-Venant 방정식이고, 수치기법으로는 가중4점음해법을 이용하려 비선형 연립방정식을 Newton-Raphson 방법으로 해석한다. 모형의 상류경계는 팔당댐 시간 방류량을 하류경계로는 전류수위표 지점의 수위를 이용하였다. 한강하류부에는 많은 지천들이 흘러들어 유입되고 있는데 지천유입량이 한강수위에 미치는 영향을 분석하기 위하여 비교적 유역면적이 큰 왕숙천, 탄천, 중랑천, 안양천 등의 지천유입량을 고려하였다. 2000년과 2001년에 발생한 2개의 실측사상을 FLDWAV 모형을 이용하여 계산된 수위값과 검증해 본 결과 실측수위를 잘 재현하고 있는 것을 알 수 있었다. 검증된 모형을 가지고 동일한 사상에 대해서 지천 유입량을 고려하지 않고 모의를 한 결과 지천유입량을 고려하였을 때와 고려하지 않았을 때의 지천유입량에 대한 수위상승량은 $1\~5cm$ 정도로 나타났다. 지천유입량에 의한 수위상승이 어느정도 일어나고 있지만 홍수기간에 이 정도의 수위상승은 한강의 흐름이나 한강하류부에 설치된 구조물의 침수피해에 크게 영향을 주지않을 것으로 판단되었다. 한강하류부의 수위는 지천유입량의 영향보다는 팔당댐의 방류량에 의해서 좌우되고 있고 홍수시에는 한강의 수위상승으로 인하여 지천에 미치는 배수영향이 훨씬 더 클 것으로 판단된다.

• 한국해안해양공학회지
• /
• 제1권1호
• /
• pp.93-101
• /
• 1989

본 논문에서는 가이드 타워, 텐션 레그 프랫폼, 무어링 부이, 해저 케이블, 사장교, 현수교, 케이블 루프 등과 같은 해상 및 육상 구조물의 유한요소 모델에 사용하기 위한 기하학적 비선형 케이블 요소를 연구 제시하였으며, 케이블 요소는 평면내에서 임의의 하중과 기하형상을 갖는 케이블에 대한 탄성현수 케이블 이론으로부터의 적합방정식과 연성행렬을 직접 이용하여 유도하였다. 또한, 유도된 케이블 유한요소에 근거하여, 케이블 부재를 사용하는 구조물들의 유한요소 해석을 위해 전산 프로그램을 개발하였으며, 시간영역 동적 해석을 위해 뉴마크-베타의 직접적분법을 사용하였고, 각 시간간격에서의 비선형 평형방정식 및 적합방정식을 풀기 위한 방법으로서 뉴톤-랩슨의 반복법을 사용하였다. 이상과 같이 개발된 전산 프로그램을 이용하여 케이블 부재에 대한 정적 및 동적 해석을 수행한 후 그 결과를 분석ㆍ고찰하여 보았다.

• 자원환경지질
• /
• 제26권4호
• /
• pp.541-549
• /
• 1993

The main goal of this paper is to determine hydraulic properties and to predict drawdown for the efficient and stable development of groundwater in the Daejong-Chun area, North of Kyungsang-Do. Based on geological survey and analysis of well logging data conducted in 1991, it is found that the type of aquifer of this area is considered to be an anisotropic unconfined aquifer with saturated thickness of 19.8 m. In order to characterize this aquifer pumping test was conducted, and the resulting drawdown data were utilized for the analysis by applying both type curve matching technique and semi-log straight line method. As a result, the average specific yield of this aquifer is estimated as 32.3%, and the average ratio of $K_H$ to $K_V$ is only 2.7, which means that gravitational effect is not significant factor for this type of aquifer. For the validation of the estimated hydraulic properties, the analytical model which was developed with Newton-Raphson iteration procedure in this study, was employed to generate the drawdown. And, the resulting drawdown was compared against actual drawdown data and it shows the excellent matches. The actual drawdown data for 9 hours of pumping were used for history matching purposes and relatively satisfactory matches were achieved in this match. Then, the model was run by using the tuned parameters that are obtained during history matching stage, and the drawdown was predicted for the next 30 years of pumping with $3,000m^3/day$ of constant pumping rate. Its result indicates that the drawdown was stabilized as 1.41 m from 20 days with $3,000m^3/day$ of constant pumping rate, which is the required amount of water to be safely supplied to this area.

• 해양환경안전학회지
• /
• 제10권1호
• /
• pp.29-33
• /
• 2004

지금까지의 강구조설계에서는 일반적인 탄성좌굴개념을 적용하고 있다. 왜냐하면 현재까지의 실적선의 데이터와 경험적인 방법에 의해 도출된 여러 가지 룰에 의한 데이터가 상당히 신뢰할만한 정도를 갖고 있기 때문이라고 판단하기 때문이다. 그러나, 최근들어 판두께가 박판인 고장력강재가 선체에 폭넓게 사용되어지면서 탄성좌굴발생 시점이 빨라졌으며 이에따른 탄소성거동을 정확히 예측할 필요성이 대두되고 있다. 이에 본 연구에서는 선체의 이중저 판넬구조에서 압축하중을 받을때의 실제판부재의 주변지지조건을 네가지로 이성화하여 해석하였으며, 이때 실제 필연적으로 존재하게 되는 열가공에 의한 비대칭형 초기처짐을 적용하였고, 비선형해석기법으로서는 Arc-length method를 적용하였고 해석코드는 범용유한요소법 소프트웨어로 잘 알려진 ANSYS를 사용하였다.

• Nuclear Engineering and Technology
• /
• 제41권7호
• /
• pp.875-884
• /
• 2009

We present three nuclear/hydrogen-related R&D activities being performed at KAIST: air-ingressed LOCA analysis code development, gas turbine analysis tool development, and hydrogen-production system analysis model development. The ICE numerical technique widely used for the safety analysis of water-reactors is successfully implemented into GAMMA, with which we solve the basic equations for continuity, momentum conservation, energy conservation of the gas mixture, and mass conservation of 6 species (He, N2, O2, CO, CO2, and H2O). GAMMA has been extensively validated using data from 14 test facilities. We developed a tool to predict the characteristics of HTGR helium turbines based on the throughflow calculation with a Newton-Raphson method that overcomes the weakness of the conventional method based on the successive iteration scheme. It is found that the current method reaches stable and quick convergence even under the off-normal condition with the same degree of accuracy. The dynamic equations for the distillation column of HI process are described with 4 material components involved in the HI process: H2O, HI, I2, H2. For the HI process we improved the Neumann model based on the NRTL (Non-Random Two-Liquid) model. The improved Neumann model predicted a total pressure with 8.6% maximum relative deviation from the data and 2.5% mean relative deviation, and liquid-liquid-separation with 9.52% maximum relative deviation from the data.

• 한국농공학회지
• /
• 제29권4호
• /
• pp.73-92
• /
• 1987

Formulation of the geometric optimization for truss structures based on the elasticity theory turn out to be the nonlinear programming problem which has to deal with the cross-sectional area of the member and the coordinates of its nodes simultaneously. A few techniques have been proposed and adopted for the analysis of this nonlinear programming problem for the time being. These techniques, however, bear some limitations on truss shapes, loading conditions and design criteria for the practical application to real structures. A generalized algorithm for the geometric optimization of the truss structures, which can eliminate the above mentioned limitations, is developed in this study. The algorithm proposed utilizes the two-levels technique. In the first level which consists of two phases, the cross-sectional area of the truss member is optimized by transforming the nonlinear problem into SUMT, and solving SUMT utilizing the modified Newton Raphson method. In the second level, which also consists of two phases the geometric shape is optimized utillzing the unindirectional search technique of the Powell method which make it possible to minimize only the objective functlon. The algorithm proposed in this study is numerically tested for several truss structures with various shapes, loading conditions and design criteria, and compared with the results of the other algorithms to examine its applicability and stability. The numerical comparisons show that the two- levels algorithm proposed in this study is safely applicable to any design criteria, and the convergency rate is relatively fast and stable compared with other iteration methods for the geometric optimization of truss structures. It was found for the result of the shape optimization in this study to be decreased greatly in the weight of truss structures in comparison with the shape optimization of the truss utilizing the algorithm proposed with the other area optimum method.

• 한국안전학회지
• /
• 제33권4호
• /
• pp.111-118
• /
• 2018

Korea is facing a surge in the aging population, showing that population aged 65 and above will be accounted for 42.5% of the total population in 2065 with the emphasis on the over-80 population consisting of 19.2%. In response to this abrupt change in population structure, the number of traffic fatality accident referring to older driver as aged 65+ years had been increasing from 605 fatalities in 2011 to 815 fatalities in 2015 resulting in increases in 34.7% in oppose to happening to decreases in 17.2% about non-older driver. With Logit analysis based on Newton-Raphson algorithm utilizing older driver's traffic fatality data for the 2011-2015 years, it was found that the likelihood of an accident resulting in a fatality for super older driver aged 80 years and above considerably increased compared to other older driver with aging classification: 2.24 times for violation of traffic lane, 2.04 times for violation of U-turn, 1.48 times for violation of safety distance, 1.35 times for violation of obstacle of passing; also average annual increase of traffic accident cost related to super older driver was fairly increased rather than other older driver groups. Hence, this study proposes that improving and amending transport safety system and Road Traffic Act for super older driver needs to be urgently in action about license management, safe driving education, etc. when considering the increase of over-80 population in the near future. Also, implementing a social agreement with all ages and social groups to apply with advanced driver assistance system for older driver groups will be able to become a critical factor to enhance safe driving over the face of the country.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.825-827
• /
• 2000

자성체를 포함하는 자기 시스템을 해석하는데 있어 비선형과 히스테리시스(Hysteresis)는 매우 중요한 역할을 한다. 특히 재질의 히스테리시스 특성을 유한요소법(FEM)을 이용하여 계산하기 위해서 많은 방법들이 소개되었다. 단순 반복법이나 Fixed Point Technique(FPT), M-iteration 법. 뉴튼 랍슨 (Newton-Raphson) 법 등이 그 예이다. 이 방법들 중에서 뉴튼 랍슨법은 빠른 수렴 특성으로 가장 많이 사용되고 있다. 하지만 뉴튼-랍슨법을 이용하여 히스테리시스 재질을 해석할 때는 매 반복 계산 때마다 계 계수행렬(System Stiffness matrix)이 변화하기 때문에 요소의 수가 매우 많을 경우 역행렬을 계산하기 위한 시간이 많이 소요되는 단점이 있다. 특히 히스테리시스 해석의 경우에는 주로 time-step법을 이용하여 계산하므로 가장 시간이 많이 소요되는 행렬 계산 시간을 단축함으로써 전체 계산 시간을 크게 줄일 수 있다. 최근 비선형 해석에서 TLM(Transmission Line Modeling)법이 도입되어 비선형 해석 시의 계산 시간을 크게 단축할 수 있게 되었다. 본 논문에서는 비선형 해석에 적용된 TLM법을 히스테리시스 해석에 적용하는 방법을 새로 제안한다. TLM법은 뉴튼-랍슨법과 달리 각 반복 계산 때마다 계수행렬식이 변화하지 않고 단지 구동항만 변하기 때문에 행렬의 LU를 한 번 저장해 두면 forward와 backward substitution만 시행하면 된다. 따라서 요소의 수가 증가할 경우 TLM법을 사용하면 뉴튼-랍슨법에 비해 매우 큰 계산 이득을 얻을 수 있다. 본 논문에서는 TLM법을 히스테리시스에 적용하는 방법을 기술하고 간단한 모델에 이 방법을 적용하여 뉴튼-랍슨법과의 비교를 통해 TLM법의 효용성을 보인다.

• Structural Engineering and Mechanics
• /
• 제24권6호
• /
• pp.709-725
• /
• 2006

In this paper the buckling and post-buckling behavior of slender bars under self-weight are studied. In order to study the post-buckling behavior of the bar, a geometrically exact formulation for the non-linear analysis of uni-directional structural elements is presented, considering arbitrary load distribution and boundary conditions. From this formulation one obtains a set of first-order coupled nonlinear equations which, together with the boundary conditions at the bar ends, form a two-point boundary value problem. This problem is solved by the simultaneous use of the Runge-Kutta integration scheme and the Newton-Raphson method. By virtue of a continuation algorithm, accurate solutions can be obtained for a variety of stability problems exhibiting either limit point or bifurcational-type buckling. Using this formulation, a detailed parametric analysis is conducted in order to study the buckling and post-buckling behavior of slender bars under self-weight, including the influence of boundary conditions on the stability and large deflection behavior of the bar. In order to evaluate the quality and accuracy of the results, an experimental analysis was conducted considering a clamped-free thin-walled metal bar. As this kind of structure presents a high index of slenderness, its answers could be affected by the introduction of conventional sensors. In this paper, an experimental methodology was developed, allowing the measurement of static or dynamic displacements without making contact with the structure, using digital image processing techniques. The proposed experimental procedure can be used to a wide class of problems involving large deflections and deformations. The experimental buckling and post-buckling behavior compared favorably with the theoretical and numerical results.

• Steel and Composite Structures
• /
• 제10권3호
• /
• pp.207-222
• /
• 2010

Fire incident in buildings is common, so the fire safety design of the framed structure is imperative, especially for the unprotected or partly protected bare steel frames. However, software for structural fire analysis is not widely available. As a result, the performance-based structural fire design is urged on the basis of using user-friendly and conventional nonlinear computer analysis programs so that engineers do not need to acquire new structural analysis software for structural fire analysis and design. The tool is desired to have the capacity of simulating the different fire scenarios and associated detrimental effects efficiently, which includes second-order P-D and P-d effects and material yielding. Also the nonlinear behaviour of large-scale structure becomes complicated when under fire, and thus its simulation relies on an efficient and effective numerical analysis to cope with intricate nonlinear effects due to fire. To this end, the present fire study utilizes a second-order elastic/plastic analysis software NIDA to predict structural behaviour of bare steel framed structures at elevated temperatures. This fire study considers thermal expansion and material degradation due to heating. Degradation of material strength with increasing temperature is included by a set of temperature-stress-strain curves according to BS5950 Part 8 mainly, which implicitly allows for creep deformation. This finite element stiffness formulation of beam-column elements is derived from the fifth-order PEP element which facilitates the computer modeling by one member per element. The Newton-Raphson method is used in the nonlinear solution procedure in order to trace the nonlinear equilibrium path at specified elevated temperatures. Several numerical and experimental verifications of framed structures are presented and compared against solutions in literature. The proposed method permits engineers to adopt the performance-based structural fire analysis and design using typical second-order nonlinear structural analysis software.