• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.291-295
• /
• 2011

A bake-out process using auto switchgear for five days was performed to evaluate the reduction effect of the concentration of volatile organic compounds (VOCs) and formaldehyde in a newly-built elementary school gymnasium. Reduction rates of VOCs were observed as followings: 38.2, 64.2, 86.3, 80.2, and 71.5% for benzene, toluene, ethylbenzene, xylene, and styrene, respectively, which satisfies the indoor air quality standards of newly-built apartment houses in Korea. The reduction rate of total VOCs and formaldehyde were 67.0 and 24.7%, respectively. Those results proved that the bake-out process using auto switchgear was effective for reducing indoor air pollutants.

• Geomechanics and Engineering
• /
• v.35 no.5
• /
• pp.525-538
• /
• 2023

The development of a city is closely linked to the construction and operation of its subway system. However, constructing a new subway tunnel under an existing station is an extremely complex task, and the deformation characteristics and mechanical behavior of the new subway tunnel during the excavation process can greatly impact the normal operation of the existing station. Although the previous studies about the case of underpass engineering have been carried out, there is limited research on the condition of a newly-built subway tunnel that closely undercrossing an existing station with zero distance between them. Therefore, this study analyzes the deformation law and mechanical behavior characteristics of the preliminary lining of the underpass tunnel during the excavation process based on the real engineering case of Chengdu Metro Line 8. This study also makes an in-depth comparison of the influence of different excavation methods on this issue. Finally, the accuracy of numerical simulation is verified by comparing it with on-site result. The results indicate that the maximum bending moment mainly occurs at the floor slab of the preliminary lining, while that of the ceiling is small. The stress state at the ceiling position is less affected by the construction process of the pilot tunnel. Compared to the all-in-one excavation method, although the process of partial excavation method is more complicated, the deformation of preliminary lining caused by it is basically less than the upper limit value of the standard, while that of the all-in-one excavation method is beyond standard requirements.

• Journal of Korea Trade
• /
• v.26 no.4
• /
• pp.63-82
• /
• 2022

Purpose - Drawing on relational institutional theory, we explored how demographic similarity between board members of a firm and newly emerged political elites led to firms' increased financial resource acquisition such as leverage ratio and decreased export intensity amidst the Asian financial crisis. We also studied how a firm's leverage ratio and export intensity can further affect firm profitability and financial credit rating. Design/methodology - We revisited and explored a unique, unprecedented crisis that affected most Korean firms: the Asian financial crisis that coincided with a governmental shift from a conservative to a liberal party. We collected demographic information from 432 listed Korean firms' board members and 43 political elites of the Blue House from 1998-2000 to create a demographic similarity measurement. We collected firms' financial information, built panel data, and used ordinary least squares regression to test our theory. Findings - Our results showed that demographic similarity between a firm's directors and newly emerged politicians had a positive association with a firm's leverage ratio but a negative association with a firm's export intensity. A firm's leverage ratio had a negative relationship with firm performance measured by firm profitability and financial credit rating. A firm's export intensity showed a positive effect on firm performance. Originality/value - We highlighted that during an economic crisis that coincided with a governmental shift and change of leading political actors, firms exerted efforts to survey the environment and build new external stakeholder relationships to cope with the changing landscape. We proposed that in an emerging market like Korea where low levels of trust and favoritism are prevalent across society, one of the relational institutional strategies that firms can employ is the selection of directors with similar demographic characteristics to political elites based on factors including birthplace and school affiliations. We examined the efforts of firms to build political networks with newly empowered political elites during a financial crisis, and the consequences of establishing such networks. We highlighted that during a financial crisis, the demographic similarity between a firm's board members and newly emerged politicians can provide firms with access to financial resources but can also result in poor management and reduced effort to enhance its international competitiveness.

• Journal of the Korean association of regional geographers
• /
• v.8 no.3
• /
• pp.295-313
• /
• 2002

While the growth of Taegu has occurred through the land readjustment project, the public sector development project and the construction of roads, its growth pattern has been shaped by physical constraints such as mountains, streams and rail roads. The processes of urban growth of Taegu are classified into four stages: the stage of urban embryo in the Chosun Era; the formation stage of the basic urban system after the Japanese Colonial Era up to 1960; the stage of urban growth in the industrialization period from 1960s to 1980; and lastly, the stage of urban expansion and maturation, with construction of extensive newly developed districts, after the 1980s. Since its promotion to a metropolitan city with the inclusion of Seongseo, Wolbae, Gosan, Ansim and Chilgok in 1981, those regions have grown into newly developed residential districts, with its accompanying high density and high rise apartments complexes, through the public sector development project. These newly developed districts are located about six to seven kilometers away from CBD of the city along with main radial roads. The sites are also located on the route of the fourth belt way of the city. While the Sangin, Seongseo and Jisan Beommul newly developed districts have developed contiguously with the existing built-up areas, the Siji and Chilgok districts have developed separately by the green belt and the Geumho River, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.268-272
• /
• 2007

As Music Room in Art School is mainly for exercise of musical instrument rather than any lecture or music appreciation, it should be designed and constructed in consideration with Acoustic Condition on the preferential basis. However, in case of Music Room in Art School that has been built already or latest newly constructed, since it was designed and constructed without any reflection of Acoustic Characteristics, it appeared as inadequate for them to enjoy music appreciation or performance activity. On such view point, this Study has examined the physical Acoustic Characteristics for the subjects on those Music Rooms of Art Middle School, Art High School, Art College built in Cheonbuk Province, and it is deemed that the material grasped in such way could be utilized as the valuable data enables to improve Acoustic Performance at the time when designing and construction or renovation for Music Room hereafter.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1018-1023
• /
• 2005

A new MR cylinder with built-in valves using MR fluid (MR valve) is suggested and fabricated for fluid control systems. The MR fluid is a newly developed functional fluid whose obvious viscosity is controlled by the applied magnetic field intensity. The MR cylinder is composed of cylinder with small clearance and piston with electromagnet. The differential pressure is controlled by the applied magnetic field intensity. It has the characteristics of simple, compact and reliable structure. The size of MR cylinder and piston has ${\varphi}30mm{\times}300mm\;and\;{\varphi}28.5mm{\times}120mm$ in face size, respectively and 0.8mm in gap length. Through experiments, it was found that the differential pressure is controlled by the applied magnetic field intensity under little influence of the flow rate, which corresponds to a pressure control valve. The differential pressure of 0.47MPa and contact force of 320N were obtained with the input current of 1.5A. The rising time of force was 1.1s in step response of a manipulator using the MR cylinder. The effectiveness of the MR cylinder was also demonstrated through the force control.

• Korean Management Science Review
• /
• v.32 no.1
• /
• pp.15-33
• /
• 2015

Under complete information, introducing additional constraints to a portfolio will have a negative impact on performance. However, real-life investments inevitably involve use of error-prone estimations, such as expected stock returns. In addition to the reality of incomplete data, investments of most Korean domestic equity funds are regulated externally by the government, as well as internally, resulting in limited maximum investment allocation to single stocks and risk free assets. This paper presents an investment framework, which takes such real-life situations into account, based on a newly developed portfolio selection model considering realistic constraints under incomplete information. Additionally, we examined the effects of additional constraints on portfolio's performance under incomplete information, taking the well-known Samsung and SK group stocks as performance benchmarks during the period beginning from the launch of each commercial fund, 2005 and 2007 respectively, up to 2013. The empirical study shows that an investment model, built under incomplete information with additional constraints, outperformed a model built without any constraints, and benchmarks, in terms of rate of return, standard deviation of returns, and Sharpe ratio.

• KIEAE Journal
• /
• v.8 no.3
• /
• pp.27-36
• /
• 2008

Urban architecture density is getting higher, and this trend is expected to continue in the future. Therefore, skyscrapers are being brought into relief as future alternative architecture beyond symbolic meaning in the aspect of demand and supply of urban space. However, skyscrapers which were newly built have many problems such as consumption of enormous amounts of energy, destruction of natural environment, and traffic jam. For this reason, environment-friendly skyscrapers based on the concept such as Green Building and Green Skyscraper started to be built around the world. However, plans or evaluation standards, which take account of the environment-friendly aspect of skyscrapers, leave much to be desired. And especially it is hard to find environment-friendly skyscrapers. Therefore, this study aims to establish the concept of environment-friendly skyscrapers that has not properly been defined, and to find realistic planning methods and practical alternatives through the analysis of the works that have brilliant ideas about environment-friendly architectural method. From the perspective of architectural planning, we did case analysis focused on site planning, form planning, elevation and floor planning, and tried to give useful ideas for high-rise architectural planning in Korea by finding practical solution focused on the active use of natural energy, saving resources, the reduction of wastes, natural architectural environment design and natural friendly system from the view of environment-friendly technological analysis.

• KIEAE Journal
• /
• v.11 no.1
• /
• pp.39-45
• /
• 2011

The concepts of interior design work have set forward an aesthetic and functional proposition to be answered by those who design spaces. The available range of suitable materials for interior use appears to be almost inexhaustible in this day and age. Now a day, relatively new fields of study on environmental-friendly interior examine humans'innate affinity for health and explore its implications for architecture and the built environment. A growing field of research suggests that spaces' relationship to aesthetics and environment can either help or hinder their occupants' health and wellness, productivity, and even their creativity. This paper presents several examples of already built apartment houses in practice, and discusses the demand of users of the spaces for health and sustainable environment, deepening the relationship between newly-constructed spaces and the remodeled ones. The considerations to some new and contemporary materials from the aspect of healthy indoor architecture design are presented in this paper. Designers need to rethink the conventional and high-tech interior environment in apartment houses with respect to perceived air quality, material emissions, and odors. The future of interior design is oriented on light shapeable materials which are able to create a unique memorable atmosphere. The primary assignment in accepting recent materials and proceedings is our responsibility to creating proposals, that are mainly safe, hygienic and environmentally proper.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.130-136
• /
• 2005

A new MR cylinder with built-in valves using MR fluid (MR valve) is suggested and fabricated fur fluid control systems. The MR fluid is a newly developed functional fluid whose obvious viscosity is controlled by the applied magnetic field intensity. The MR cylinder is composed of cylinder with small clearance and piston with electromagnet. The differential pressure is controlled by the applied magnetic field intensity. It has the characteristics of simple, compact and reliable structure. The size of MR cylinder and piston has $\varphi30mm\times300mm$ and $\varphi28.5mm\times120mm$ in face size, respectively and 0.8mm in gap length. Through experiments, it was found that the differential pressure is controlled by the applied magnetic field intensity under little influence of the flow rate, which corresponds to a pressure control valve. The differential pressure of 0.47MPa was obtained with the input current of 1.5A. The rising time was 2.3s in step response of a manipulator using the MR cylinder. The effectiveness of the MR cylinder was also demonstrated through the position control.