• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.512-521
• /
• 2013

This paper presents the user needs analysis and information visualization for the development of a semantic-based national R&D information navigation service in information service planning phase, which converges and fuses NDSL databases and NTIS databases. To investigate and analyze the user needs for improving usability, we make an improvement plan for R&D information services via a survey targeted at 30 persons, and on-site interviews targeted at 12 persons, almost of who are researchers in industries, universities and government-funded institutes. To design new information visualization service, we propose an interactive national R&D information visualization service, which is provided in navigation type, and prescribe persona and screen prototyping according to the user needs analysis. We design the national R&D information convergence/fusion architecture based on the NDSL databases, including 345,411 academic articles, 620,555 co-authors and 49,958 reports and NTIS databases including 187,466 national R&D projects. We expect that the national R&D information convergence/fusion architecture contributes to R&D information convergence/fusion as a leading model/standard and the interactive navigation-typed information visualization service strengthens usability continuously.

• Journal of Environmental Impact Assessment
• /
• v.24 no.2
• /
• pp.163-174
• /
• 2015

Urbanization caused various environmental problems like destruction of natural water cycle and increased urban flood. To solve these problems, LID(Low Impact Development) deserves attention. The main objective of LID is to restore the water circulation to the state before the development. In the previous studies about the LID, the runoff reduction effect is mainly discussed and the effects of each techniques of LID depending on rainfall types have not fully investigated. The objective of this research is to evaluate the effect of LID using the quantitative simulation of rainwater runoff as well as an amount of infiltration according to the rainfall and LID techniques. To evaluate the water circulation of LID on the development area, new land development areas of Hanam in South Korea is decided as the study site. In this research, hydrological model named STORM is used for the simulation of water balance associated with LID. Rainfall types are separated into two categories based on the rainfall intensity. And simulated LID techniques are green roof, permeable pavement and swale. Results of this research indicate that LID is effective on improvement of water balance in case of the low intensity rainfall event rather than the extreme event. The most effective LID technique is permeable pavement in case of the low intensity rainfall event and swale is effective in case of the high intensity rainfall event. The results of this study could be used as a reference when the spatial plan is made considering the water circulation.

• Journal of the Korean Institute of Educational Facilities
• /
• v.25 no.1
• /
• pp.13-24
• /
• 2018

Planning and designing training facilities has been developed from educational facilities, and increasingly diversified society has raised a need for facilities dedicated to training and education in a differentiated space separate from the one for regular works. This particular need of our times has led to the expansion of training facilities nationwide although they have something to be desired when it comes to planning and designing with sustainability associated with the locational characteristics of urban space as well as the unique types of facilities taken into account. Against this backdrop, this study will examined a variety of training facilities that have been established since 2000 through theoretical review and conduct intensive analysis on the characteristics of the planning aspects to suggest their significance and implications and to present the overall meanings and ramifications of planning approaches in consideration of new challenges modern training facilities are faced with, which have been revealed through architectural design competitions in recent years. The relevant implications are as follows. First, one of the locational advantages of training facilities, which is commanding beautiful scenery of the surrounding area, can be considered as intent to stress the aspect of a resort, one of the functions of any training facilities. As this study has demonstrated, many training facilities are located near around a beach or a lake. Second, training facilities can be classified into three different types in terms of their location: urban, suburban and resort and such locational characteristics are directly related to intended programs and differentiated links with target users. Third, the architectural styles of training institutes are differentiated in terms of harmonious arrangement between beautiful natural scenery and buildings in consideration of the layout characteristics of major facilities and the distance of ramps in and out of the facilities along with architectural features, including the transparency of building elevation and the type of slopes of roof structure. Fourth, the individual lodging buildings feature a variety of types depending on the design concept with different roles depending on the directional aspects such as the connection of ramps and the relations with the outside. Fifth, outdoor space plans are differentiated according to the intended purpose of training facilities. When it comes to gym facilities, for example, different outdoor space plans are found to be made depending on the original design concept such as outdoor playground-centered planning or golf facilities.

• Clean Technology
• /
• v.27 no.4
• /
• pp.297-305
• /
• 2021

In the domestic aluminum industry, the extrusion process is a major process accounting for more than 40% of the total production. However, most domestic aluminum extrusion companies produce aluminum using old equipment that is more than 30 years old. Extrusion press is when the equipment is not replaced before the wear and breakage of major parts occur, reducing productivity and increasing the defect rate compared to new equipment. The old extrusion press often loses part drawings, so it is difficult to repair them properly on-site and to remanufacture them due to the lack of technical skills for maintenance. Therefore, a systematic remanufacturing plan must be designed from dismantling the equipment. In this study, remanufacturing FMEA was devised to remanufacture old extrusion press. The risk priority was analyzed by considering the degree of damage to the recycled parts, the cycle due to breakage/damage during the extrusion process, and the value of recycling resources due to remanufacturing. To standardize the remanufacturing process, remanufactured FMEA was performed through part analysis according to the structural analysis of the extrusion press. In addition, remanufacturing priorities were selected for each part, while remanufacturing itself was studied for efficiency of resource circulation and product quality stabilization.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.4-21
• /
• 2014

Korean government has taken positive policies, including making "An Basic Plan on the Conservation and Activation of the Royal Tombs of the Joseon Dynasty, UNESCO World Heritage", since 40 royal tombs of the Joseon Dynasty were inscribed as UNESCO World Heritage in 2009. However, projects utilizing the royal tombs of the Joseon Dynasty are in the beginning step and very few has been researched on those projects academically. This study analyzed total 311 projects utilizing the royal tombs of the Joseon Dynasty, which have been made by the Cultural Heritage Administration of Korea from 2009 to 2014, through the literature review and content analysis methodology. An analysis frame consists of educational, touristic, compound and industrial activation on the basis of the utilization types made by the Cultural Heritage Administration of Korea. Most projects utilizing the royal tombs of the Joseon Dynasty are in the very beginning step in terms of educational and touristic utilization. No project utilizing the royal tombs of the Joseon Dynasty in terms of industrial utilization is found. Those projects are almost similar without distinctive characteristics peculiar to each royal tombs. Most projects have been taken on the short term level and the budget size for those is not enough. Projects are mostly focused on the on-site of royal tombs with little paying attention to converging projects utilizing digital and on line techniques. Some suggestions are the followings: increase of the budget on projects utilizing the royal tombs of the Joseon Dynasty, development of content peculiar to each tomb, development of industrial projects, development of converging projects utilizing digital and on line techniques, establishment of new medium and long term plans for utilization of the royal tombs of the Joseon Dynasty and so on.

• Communications of Mathematical Education
• /
• v.33 no.3
• /
• pp.355-376
• /
• 2019

Since the second comprehensive mathematics education plan was announced in 2012, many policies have been implemented based on it. However, due to many changes in various social situations and revision of the curriculum, new plans and policy proposals for mathematics education are strongly required. But, we need to recognize what the changes in the current social and educational situation ask for education in order to make meaningful policy. Therefore, in this study, we intend to develop an appropriate questionnaire to investigate mathematics teachers' perceptions and educational status of mathematics by analyzing former domestic and international studies on the related field and reflecting the educational situation in Korea. When developing questions, experts' opinions were consulted and preliminary on-site survey studies were conducted to maintain the suitability and reliability of the questions. Through these procedure, 33 questions were developed in three areas: teachers' recognition on mathematics education, educational status of mathematics education, and ICT utilization. It will be used as a tool to investigate math teachers' perception and current status of mathematics education and the results from this survey will be useful for developing mathematics education policies for the future.

• The Korean Journal of Archival Studies
• /
• no.36
• /
• pp.69-119
• /
• 2013

The local history research started from the 1960's postmodernism neted in the local history as the subject of diversity instead of National history. The local is being magnified as a new research theme among history scholar. In these circumstances, the local history research shows sign of activity and the movement that used in various ways at education has become more active. Compared to the contents business of local history, development of education contents what serviced for student is insufficient. Therefore, this research suggests development plan of local history education contents using archives which efficient tool of history education. Students can grow the ability of historical inquiry, thinking, insight through archives-assisted learning. Also, self-learning is possible instead of a lecture by teacher. This research shows a development of archival contents for local history education though literature research, abroad case analysis, focus group interview with history teachers. Concepts of the local history, local history education, education contents are examined at literature research. Local history education of the State Archives of the United States of America, the United Kingdom, Australia web site is analyzed. These state archives have been providing the web based service of archival contents for local history education for a long time. With these theoretical background, carry out a focus group interview with middle school history teachers. It draw conclusion that 14 category and 35 subcategory and these are reflected in the development of archival contents for local history education.

• Conservation Science in Museum
• /
• v.27
• /
• pp.103-124
• /
• 2022

This study examined the properties of the materials used in the three-story pagoda at Jangha-ri, Buyeo. It was performed in order to identify the objective condition of the pagoda and establish an appropriate plan for the conservation treatment of the pagoda. According to the study, the average total magnetic susceptibility was 3.71 (10^-3 SI unit), and at least four types of granite with different origins were likely used in the production of the pagoda. The ultrasonic velocity averaged 1,519m/s, and the coefficient of weathering showed an average of grade 4. The thermal gradient between the cement (restoration materials) and original materials was identified through thermal imaging. In some areas, the cement restoration materials required replacement with new stone materials with properties similar to those of the original stone materials. Taking into account these results, a map of weathering damage was prepared and appropriate conservation treatment plans were established based on the findings of previous studies. Since the pagoda had suffered severe biological damage and discoloration, surface contaminants were removed through wet cleaning with distilled water and a brush. The exfoliated areas were reinforced on the site by mixing epoxy resin with powdered stone with the same properties as the original stone materials of the pagoda.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.673-688
• /
• 2023

Purpose: Fires that occur during construction are infrequent, but cause great damage. Recently, with the growth of the logistics and distribution industry, the number of construction sites for new logistics warehouses is increasing, so it was selected as a research subject and research was conducted to reduce accidents at construction sites through the development of a fire risk assessment tool to quantitatively approach fire prevention. Method: A comprehensive fire risk assessment tool was accumulated by classifying the work in progress, classifying combustibles and ignition sources by grade, excluding air (oxygen), which is difficult to control, and additionally substituting evacuation safety. Result: Using the developed and proposed fire risk evaluation tool, excavation work with low fire risk, facility construction with medium fire risk, and finishing work with high fire risk were sampled to derive the result (CGI). Conclusion: In this study, it was possible to establish specific preventive measures and evaluate evacuation safety by controlling physical conditions (combustibles) and energy conditions (ignition sources) according to the risk assessment by developing a tool that can evaluate the risk of 14fire occurrence at construction sites. It is expected that in the future, through the application of the fire risk evaluation tool at construction sites, it will be provided as a criterion for establishing a process plan that can reduce risk and evaluating the adaptability of firefighting equipment.14

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.1
• /
• pp.1-14
• /
• 2022

In order to conduct rapid, accurate and safe surveying at the excavation site, In this study, the possibility of underground facility survey using drones and the expected effect of 3D visualization were obtained as follows. Phantom4Pro 20MP drones have a 30m flight altitude and a redundant 85% flight plan, securing a GSD (Ground Sampling Distance) value of 0.85mm and 4points of GCP (Groud Control Point)and 2points of check point were calculated, and 7.3mm of ground control point and 11mm of check point were obtained. The importance of GCP was confirmed when measured with low-cost drones. If there is no ground reference point, the error range of X value is derived from -81.2 cm to +90.0 cm, and the error range of Y value is +6.8 cm to 155.9 cm. This study classifies point cloud data using the Pix4D program. I'm sorting underground facility data and road pavement data, and visualized 3D data of road and underground facilities of actual model through overlapping process. Overlaid point cloud data can be used to check the location and depth of the place you want through the Open Source program CloudCompare. This study will become a new paradigm of underground facility surveying.