• 한국추진공학회지
• /
• 제23권3호
• /
• pp.104-111
• /
• 2019

압축기와 팽창기로 구성된 새로운 개념의 로터리엔진이 개발 중에 있다. 초기 프로토타입을 제작하고 작동성 확인을 위한 모터링, 압축기 압력 및 연료 연소시험을 수행하였다. 본 논문은 이 새로운 엔진에 적합하게 개발된 사이클 해석 방법에 대한 것이다. 본 엔진 고유의 작동 메커니즘에 대한 분석과 공기의 열역학적 해석을 공기 흡입, 압축, 연소실 진입, 연소, 팽창 그리고 배기에 이르는 각 과정에서 수행하였다. 본 논문에서 제시된 해석 방법으로 압축기와 팽창기 사이의 압축공기 냉각효과는 물론 엔진의 여러 설계 변수가 엔진 성능에 주는 영향을 파악할 수 있으며 이 논문에 몇 가지 경우에 대한 계산 결과를 기술하였다.

• 한국수소및신에너지학회논문집
• /
• 제26권3호
• /
• pp.294-299
• /
• 2015

Free piston linear engine (FPLE) is a promising concept being explored in the mid-20th century. On the other hand, Arficial neural networks (ANNs) are non-linear computer algorithms and can model the behavior of complicated non-linear processes. Some researchers already studied this method to predict internal combustion engine characteristics. However, no investigation to predict the performance of a FPLE using ANN approach appears to have been published in the literature to date. In this study, the ability of an artificial neural network model, using a back propagation learning algorithm has been used to predict the in-cylinder pressure, frequency, maximum stroke length of a free piston linear engine. It is advised that, well-trained neural network models can provide fast and consistent results, making it an easy-to-use tool in preliminary studies for such thermal engineering problems.

• 한국연소학회지
• /
• 제16권2호
• /
• pp.9-15
• /
• 2011

Homogeneous charge compression ignition(HCCI) is the best concept able to provide low NOx and PM in diesel engine emissions. This new alternative combustion process is mainly controlled by chemical kinetics in comparison with the conventional combustion in internal combustion engine. In this paper, combustion characteristics of HCCI engine with suggested diesel surrogate(heptane/toluene mixture fuel) reaction mechanism were numerically investigated by heptane/toluene mixture ratio and EGR ratio. As results, the ignition timing became faster with increasing of heptane, and an initial oxidation and the ignition timing of the mixture fuel were affected by heptane and toluene, respectively.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.47-55
• /
• 1998

A new ignition system concept was developed to improve ignition performance, accuracy of control and the reliability of the ignition system. The new ignition system has ho호 frequency discharge characteristics with 1.5-2.0 ms discharge duration, in place of the usual solitary longer duration event. We applied the system to a commercial engine to study its influence on the maximum combustion pressure attained during the cycle, when this peak pressure occurred, imep, variation rate of the engine speed and the flammability limit of a lean mixture. In this study, we clarified that the new ignition system had a beneficial effect of the lean mixture flammability limit. Also for a given mixture strength we found that the mew ignition system gave a higher peak cylinder pressure than in the case of the conventional ignition system.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.326-329
• /
• 2008

DARPA가 계획 중인 대형 극초음속 추진 기관 개발 프로그램 VULCAN 프로그램은 듀얼모드 램제트/스크램제트 엔진과 연계되어 TBCC엔진을 이룰 수 있도록, 기존의 터보제트(또는 터보팬) 엔진과 CVC과 엔진을 결합하여 마하수 4이상에서 작동 가능한 엔진을 개발하는 것을 목표로 하고 있다. CVC 엔진은 데토네이션 연소 현상을 기본으로 하여 고마하수에서 고효율을 얻을 수 있는 PDE 이나 CDE와 같은 신개념의 엔진이다. 본 논문에서는 부산대학교 항공우주공학과 연소 추진 연구실에서 지난 수년간 국제공동 연구의 형태로 수행한 데토네이션 현상의 추진기관 응용에 연구에 대하여 소개한다.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.24-30
• /
• 2004

As the environmental pollution becomes serious global problem, the regulation of emission exhausted from automobiles is strengthened. Therefore, it is very important to know how to reduce the NOx and PM simultaneously in diesel engines, which has lot of merits such as high thermal efficiency, low fuel consumption and durability. By this reason, the new concept called as Homogeneous Charge Compression Ignition(HCCI) engines are spotlighted because this concept reduced NOx and P.M. simultaneously. However, there is trade off between output and NOx in a HCCI engine. In this study, output and emission characteristics for a gasoline direct injection type HCCI engine were investigated to clarify the effects of intake air temperature, injection time and mixture formation. From these experiments, we found that the smoke was not produced when the fuel was injected earlier than BTDC 90$^{\circ}$. In addition, the output was increased because of delay of ignition time and NOx emission was decreased because of homogeneous charge of first injection in case of split injection.

• 정보처리학회논문지B
• /
• 제9B권1호
• /
• pp.7-16
• /
• 2002

웹 검색 엔진의 검색 결과를 클러스터링하는 후처리 클러스터링 알고리즘은 그 특성상 일반적인 클러스터링 알고리즘과는 다른 요구조건을 갖는다. 본 논문에서는 이러한 후처리 클러스터링 알고리즘의 요구조건들을 최대한 만족하는 새로운 클러스터링 알고리즘을 제안하고자 한다. 제안된 Concept ART는 문서 클러스터링에 있어 여러 가지 장점을 갖는 개념 벡터와 실시간 클러스터링 알고리즘으로 알려진 Fuzzy ART를 결합한 형태로써, 후처리 클러스터링뿐 아니라 범용의 클러스터링 알고리즘으로도 응용이 가능하다.

• 한국지능시스템학회논문지
• /
• 제12권3호
• /
• pp.219-227
• /
• 2002

웹 검색 엔진의 검색 결과를 클러스터링하는 후처리 클러스터링 알고리즘은 그 특성상 일반적인 클러스터링 알고리즘과는 다른 요구조건을 갖는다. 본 논문에서는 이러한 후처리 클러스터링 알고리즘의 요구조건들을 최대한 만족하는 새로운 클러스터링 알고리즘을 제안하고자 한다. 제안된 Fuzzy Concept ART는 무서 클러스터링에 있어 여러 가지 장점을 갖는 개념 벡터와 실시간 클러스터링 알고리즘으로 알려진 Fuzzy ART를 퍼지이론에 기반하여 결합한 형태로써, 후처리 클러스터링뿐 아니라 범용의 클러스터링 알고리즘으로도 응용이 가능하다.

• 산업경영시스템학회지
• /
• 제35권3호
• /
• pp.110-117
• /
• 2012

A product family design has received much attention over the last several decades, since a product family-based development shortens lead-times and reduces cost, as well as increases efficiency and effectiveness of the product realization process. It is challenging work, however, to define the product family design in the heterogeneous product development environments, due to myriads of products related information described in different ways across products in any companies. In this paper, we provided a way of defining product family design framework using formal concept analysis and ontology language. Based on this, the specific product family can be derived by ontological reasoning, and the new product concept can be also expanded in the framework. The proposed framework is formalized using OWL (Web Ontology Language) and implemented in $Prot{\acute{e}}g{\acute{e}}$. Actual product family design algorithm is carried out using FaCT++ engine, a plug-in to $Prot{\acute{e}}g{\acute{e}}$, and the benefits of the proposed method are also demonstrated through a case study.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.1-6
• /
• 2003

Steady flow bench test is a practical, powerful and widely used in most engine manufacturers to give a design concept of a new engine. In order to use steady data as a performance index, it is necessary to build some database, which can correlate the port characteristics with engine data. However, it is very difficult to investigate all port shapes with experimental tools. The steady flow scheme is relatively simple and its results are bulk ones such as flow rate and momentum of flow. Therefore a CFD code can be easily applied to the port evaluation. In this study, the steady flow test was simulated through three-dimensional analysis on intake port design for comparing with experimental data and confirming the feasibility of applying analytic method . for this purpose, the effect of valve curvature on flow rate was estimated by a CFD code. Numerical results were compared with those of real steady flow tests. As a result, the results of 3-D analysis were almost consistent with experimental data.