• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.426-428
• /
• 2005

Recently, There has been growing interest in new renewable energy systems with high-energy efficiency due to the increasing energy consumption and environmental pollution problems, but an insertion of new renewable energy systems to existing power distribution systems can cause several problems such as voltage variations, harmonics, protective coordination, increasing fault current etc, because of reverse power. This paper was applied to Sukumar M, Brahma, A. Girgis[1] proposal schemes and identilys the faulted section performing short-circuit analysis by MATLAB programs to 22.9[kV] distribution system interconnected a large number of new renewable energy system and was analyzed on protective coordination between reclose and Sectionalizer.

• New & Renewable Energy
• /
• v.20 no.1
• /
• pp.52-60
• /
• 2024

This study conducted an economic analysis of renewable heat energy by estimating the levelized cost of heat production (LCOH) of ST and GSHP and comparing it with the cost of alternative fuels. The LCOH of ST ranged from 396.8 KRW/kWh to 578.7 KRW/kWh (small-scale), 270.3 KRW/kWh to 393.3 KRW/kWh (large-scale), and 156.3 KRW/kWh to 220.7 KRW/kWh for GSHP. The economic feasibility of ST and GSHP was analyzed by comparing the calculated LCOH and the fuel costs such as gas and kerosene prices. Moreover, scenario analyses were conducted for installation subsidies under the current system to examine the changes in the economics of renewable thermal energy.

• New & Renewable Energy
• /
• v.20 no.1
• /
• pp.102-109
• /
• 2024

The Typical Meteorological Year (TMY) dataset compiles 12 months of data that best represent long-term climate patterns, focusing on global horizontal irradiance and other weather-related variables. However, the irradiance measured on the plane of the array (POA) shows certain distinct distribution characteristics compared with the irradiance in the TMY dataset, and this may introduce some biases. Our research recalculated POA irradiance using both the Isotropic and DIRINT models, generating an updated dataset that was tailored to POA characteristics. Our analysis showed a 28% change in the selection of typical meteorological months, an 8% increase in average irradiance, and a 40% reduction in the range of irradiance values, thus indicating a significant shift in irradiance distribution patterns. This research aims to inform stakeholders about accurate use of TMY datasets in potential decision-making. These findings underscore the necessity of creating a typical dataset by using the time series of POA irradiance, which represents the orientation in which PV panels will be deployed.

• Current Photovoltaic Research
• /
• v.12 no.1
• /
• pp.24-30
• /
• 2024

To create an environment for growing ginseng sprouts, we developed a solar module that partially transmits and disperses light. A G to G type light transmission and dispersion solar module was developed using glass with a mist pattern applied, and the light dispersion effect of the developed module was confirmed through illuminance measurement. The output of one module is approximately 260 W, and the configuration consists of 48 cells in series in 4 strings. The cultivation system where the developed module will be installed was developed in the form of a container, and three units of 2.6 kW (260 W x 10 EA). The inside of the cultivation system consists of a shading screen, air conditioner, ventilator, plastic pot, etc. to create an environment for cultivating sprout ginseng. As a result of actually planting sprout ginseng, it was confirmed through verification that the plants were grown without any problems.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.337-340
• /
• 2008

As a 'Construction of Information System on GIS based and Resource Map', establish the strategic of design about construction of Spatial Data Warehouse for New & Renewable Energy For Construction of comfortable Spatial Data Warehouse, It suggested The Construction of Spatial Data Warehouse on Block(Grid) Based with Analyze into the old Data & Method of Study. For Decide the Block(Grid) Size, We need The Study of Data & Method. Also, we expect Standardize The Process of Change & Apply with Data. make the best use of New & Renewable Energy Part

• New & Renewable Energy
• /
• v.2 no.1 s.5
• /
• pp.3-13
• /
• 2006

• New & Renewable Energy
• /
• v.2 no.1 s.5
• /
• pp.26-32
• /
• 2006

• New & Renewable Energy
• /
• v.2 no.1 s.5
• /
• pp.33-45
• /
• 2006

• Current Photovoltaic Research
• /
• v.11 no.2
• /
• pp.58-65
• /
• 2023

The expanding significance of energy storage (ES) technology is increasing the acceptability of power systems by augmenting renewable energy supply. To deploy such ES technologies, we must select the optimal technology that meets the requirements of the system and confirm the technical and economic feasibility of the business model based on it. Herein, we propose a method and tool for selecting the optimal ES technology and service suitable for meeting the requirements of the system, based on its performance characteristics. The method described in this study can be used to discover and apply various ES technologies and develop business models with excellent economic feasibility.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.2
• /
• pp.116-124
• /
• 2009

We investigated the influences of cobalt coating deposited by DC electroplating on the ferritic stainless steel, STS 430, as a protective layer on a metallic interconnect for SOFC applications. Cobalt coated STS 430 revealed a uniform and denser-packing oxide surface and a reduced growth rate of $Cr_2O_3$ scales after oxidation at $800^{\circ}C$in air. Cobalt coating layer was oxidized to $CoCo_2O_4$ and Co containing mixed oxide spinels such as $Co_2CrO_4$, $CoCr_2O_4$, and $CoCrFeO_4$. The area specific resistance value of Co coated sample was $0.020\;{\Omega}cm^2$ lower than that of uncoated at $800^{\circ}C$ in air during 500 h. After 1000 h oxidation, cobalt oxide coating layer suppressed chromium outward diffusion.