• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.709-718
• /
• 2017

The installation of the elevator ARD(Automatic Rescue Device) system has been forced into law in these days in order to safely rescue passengers during power failure. The configuration of the ARD system consists of energy storage device, power converter and control systems. The EDLC(Electric Double Layer Capacitor) are used as energy storage device for rapid charge/discharge purposes. The power conditioning system (PCS) consists of bi-directional converter, 3-phase converter and control system. The dead-beat control system is adopted for most systems however it requires complex mathematical calculations, the high performance microprocessors are mandatory and thus it can be a cause of high manufacturing cost. In this paper the new control method for average current mode control is presented for simple structure. The control algorithm is applied to the single phase system and then expands to three phase system to meet the sysem requirements. The mathematical modeling using average modeling method is presented and analysed by PSIM computer simulation to verifie the validity of the proposed control methods.

• Journal of Hydrogen and New Energy
• /
• v.29 no.4
• /
• pp.339-356
• /
• 2018

Although fuel cell systems have advantages in terms of electric efficiency and environmental impact compared with conventional power systems, fuel cell systems have not been deployed widely due to their low reliability and high price. In order to guarantee the lifetime of 10 years, which is the commercialization goal of Polymer electrolyte fuel cells (PEFCs), it is necessary to improve durability and reliability through optimized operation and maintenance technologies. Due to the complexity of components and their degradation phenomena, it's not easy to develop and apply the diagnose and prognostic methodologies for PEFCs. The purpose of the paper is to show the current state on PEFC prognostic technology for condition based maintenance. For the prognostic of PEFCs, the model driven method, the data-driven, and the hybrid method can be applied. The methods reviewed in this paper can contribute to the development of technologies to reduce the life cycle cost of fuel cells and increase the reliability through prognostics-based health management system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.11
• /
• pp.949-954
• /
• 2016

When a snowplow is operating in the up or down direction, the sensor stops the movement automatically and the wire could be broken from an endless drive in the reverse direction impact or conversely winding wire. In the present study, a new bobbin was designed to ensure the durability of snowplows; in this design, the bobbin plays the role of a clutch during power transfer or idling. This will protect the blade of the snowplow during an impact and maintain close contact of the blade with the road. Therefore, the new technology to eliminate the tension and fatigue of the wire is suggested by winding a chain instead of the wire in the newly designed bobbin. From these, it was developed to extend the life of the snowplow without causing damages to the vehicle.

• Journal of the Society of Disaster Information
• /
• v.17 no.4
• /
• pp.684-693
• /
• 2021

Purpose: The purpose is to establish a safe facility environment from abnormal voltages such as lightning by developing a smart land resistance measuring device that can acquire real-time land resistance data using Arduino. Method: This paper studied design models and application cases by developing a land resistance acquisition and analysis system with Arduino and a power line communication (PLC) system. Some sites in the wind power generation complex in Gyeongsangnam-do were selected as test beds, and real-time land resistance data applied with new technologies were obtained. The electrode arrangement adopted a smart electrode arrangement using a combination of a Wenner four electrode arrangement and a Schlumberger electrode arrangement. Result: First, the characteristic of this technology is that the depth of smart multi-electrodes is organized differently to reduce the error range of the acquired data even in the stratigraphic structure with specificity between floors. Second, IT convergence technology was applied to enable real-time transmission and reception of information on land resistance data acquired from smart ground electrodes through the Internet of Things. Finally, it is possible to establish a regular management system and analyze big data accumulated in the server to check the trend of changes in various elements, and to model the optimal ground algorithm and ground system design for the IT convergence environment. Conclusion: This technology will reduce surge damage caused by lightning on urban infrastructure underlying the 4th industrial era and design an optimized ground system model to protect the safety and life of users. It is also expected to secure intellectual property rights of pure domestic technology to create jobs and revitalize our industry, which has been stagnant as a pandemic in the post-COVID-19 era.

• Structural Engineering and Mechanics
• /
• v.86 no.5
• /
• pp.607-619
• /
• 2023

This study, it was tried to evaluate the asphalt behavior under tensile loading conditions through indirect Brazilian and direct tensile tests, experimentally and numerically. This paper is important from two points of view. The first one, a new test method was developed for the determination of the direct tensile strength of asphalt and its difference was obtained from the indirect test method. The second one, the effects of particle size and loading rate have been cleared on the tensile fracture mechanism. The experimental direct tensile strength of the asphalt specimens was measured in the laboratory using the compression-to-tensile load converting (CTLC) device. Some special types of asphalt specimens were prepared in the form of slabs with a central hole. The CTLC device is then equipped with this specimen and placed in the universal testing machine. Then, the direct tensile strength of asphalt specimens with different sizes of ingredients can be measured at different loading rates in the laboratory. The particle flow code (PFC) was used to numerically simulate the direct tensile strength test of asphalt samples. This numerical modeling technique is based on the versatile discrete element method (DEM). Three different particle diameters were chosen and were tested under three different loading rates. The results show that when the loading rate was 0.016 mm/sec, two tensile cracks were initiated from the left and right of the hole and propagated perpendicular to the loading axis till coalescence to the model boundary. When the loading rate was 0.032 mm/sec, two tensile cracks were initiated from the left and right of the hole and propagated perpendicular to the loading axis. The branching occurs in these cracks. This shows that the crack propagation is under quasi-static conditions. When the loading rate was 0.064 mm/sec, mixed tensile and shear cracks were initiated below the loading walls and branching occurred in these cracks. This shows that the crack propagation is under dynamic conditions. The loading rate increases and the tensile strength increases. Because all defects mobilized under a low loading rate and this led to decreasing the tensile strength. The experimental results for the direct tensile strengths of asphalt specimens of different ingredients were in good accordance with their corresponding results approximated by DEM software.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.569-575
• /
• 2020

Recently, research on renewable energy technologies has come into the spotlight due to rising concerns over the depletion of fossil fuels and greenhouse gas emissions. Demand for portable electronic and wearable devices is increasing, and electronic devices are becoming smaller. Energy harvesting is a technology for overcoming limitations such as battery size and usage time. In this paper, the V-I characteristic curve and internal resistance of thermal electric devices were analyzed, and MPPT control methods were compared. The Perturbation and Observation (P&O) control method is economically inefficient because two sensors are required to measure the voltage and current of a Thermoelectric Generator(TEG). Therefore, this paper proposes a new MPPT control method that tracks MPP using only one sensor for the regulation of the output voltage. The proposed MPPT control method uses the relationship between the output voltage of the load and the duty ratio. Control is done by periodically sampling the output voltage of the DC-DC converter to increase or decrease the duty ratio to find the optimal duty ratio and maintain the MPP. A DC-DC converter was designed using a cascaded boost-buck converter, which has a two-switch topology. The proposed MPPT control method was verified by simulations using PSIM, and the results show that a voltage, current, and power of V=4.2 V, I=2.5 A, and P=10.5 W were obtained at the MPP from the V-I characteristic curve of the TEG.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.3
• /
• pp.17-28
• /
• 2012

This study aims to present the ground for the introduction of energy-saving landscape facilities which can meet the requirements of the age and create a new space by introducing the facilities which saves energy and that users prefer at the space where urbanites enjoy leisure activities in the urban parks. Thus, in addition to a spatial analysis of the parks for 10 urban parks in Gimpo, through an attitude survey on the users' behaviors, the following conclusions were drawn out. First, as a result of putting all facilities in the urban parks in Gimpo, on average, 6.9 out of the standards of 9 (76.6%) have been installed, and as a result of an analysis on the total number of the installed facilities, on average, about 28 kinds of facilities have been installed, so only 22.4% of the total 125 facilities were installed. Second, many urbanites are using the parks for the purpose of taking a walk and exercise to improve their health; however, the legal standards regulate only 2.9 exercise facilities on average in the target area, which are somewhat insufficient. Third, regarding the citizens' intent to participate in responding to climate change, 76% of them showed their intention of participation. Thus, if the energy-saving facilities, the purpose of this study, are introduced, many users will use them, and it is judged that costs for existing street lights and electric power plants will decrease. Fourth, as a result of an analysis of their satisfaction with the facilities, the value of R-square meaning the explanatory power of the independent variables put in a linear model for dependent variables was 0.860, approximately 81% of the total satisfaction, which was a high explanatory power. This study conducted an attitude survey on the users of urban parks in Gimpo at the dimensions of the introduction of energy-saving facilities in the urban parks, the national policies and responses to climate change. It is significant that it identified the appropriateness of developing much more energy-saving landscape facilities needed for low-carbon green growth in various types, and as a subsequent project, a more precision study on this is necessary continuously.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.98-102
• /
• 2012

These days, Uncooled IR Systems are more popular in the area of defense and aerospace than before. Uncooled IR Systems are widely used as core technology for making unmanned systems and detecting enemy objects during the day and night in the distance. Recently, researches on TEC-less IRFPA have been increased to minimize the power consumption and to make a smaller system than before. For this, it needs to find adequate NUC(Non-Uniformity Correction) coefficients as FPA(Focal Plane Array) temperature changes. In this paper, we propose a new NUC coefficient estimating technique, DCCE-LI(Dynamic Calibration Coefficients Estimation with Linear Interpolation), for TEC-less IRFPA. It is based on a linear interpolation method and it can estimate NUC coefficients in real-time. So, by testing and evaluating it with some IR images, we conclude that the quality of IR images using proposed method is better than applying static coefficients.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.483-494
• /
• 2022

Owing to the saturation of ground spaces in downtown areas, underground spaces are being developed increasingly. Underground spaces are utilized for transportation, water supply and sewerage, communication zones, electric power zones, and various cultural complexes. In Korea, for excavating underground spaces, blasting methods using gunpowder such as the New Austrian Tunneling Method (NATM) are mainly used. However, the blasting method causes vibration and noise during tunnel excavation, generating many complaints from residents in the vicinity of the excavation site. To address this problem, various methods have been developed, and recently, vibration and noise have been reduced using deep excavation. This study predicts blast vibration changes according to the depth, under the same blasting and tunnel conditions, using numerical analysis based on the blast vibration measurement data of the GTX-A route, the tunnel cross-section drawings, and ground investigation reports. Furthermore, the necessary separation distance from densely populated areas such as residential areas is suggested by analyzing the trend of decreasing blast vibration according to the distance from ground surface directly above the blasting location.

• Information Systems Review
• /
• v.12 no.1
• /
• pp.189-207
• /
• 2010

We applied IT ecosystem analysis to Smart Grid system in this paper and thereby compared various arguments about Smart Grid technologies against the reality of the power generation and distribution in South Korea with a special attention to the power distribution side. Our work attempts to propose policy implications in the government-level based on a firm-level analysis using the framework of the competitive strategy and advantage. The Smart Grid initiative is expected to enhance the efficiency in the power generation and distribution. In addition, the Smart Grid initiative aims at capturing the opportunities in the electric power business such as parts, components, supplies, and system products in the global arena. Prerequisites of smart distribution system include building infrastructure based on smart distribution parts, information systems, communication technologies, and developing various application programs and interfaces that would interact with the consumers. Consumers are expected to play an integral role by changing their consumption patterns in response to dynamic pricing and quality choices enabled by the smart distribution technologies. In order to induce the consumers to participate actively in the program, firms and policy makers should consider providing consumers economic incentives and proper education for better understanding of new technologies. Our work helps policy makers and firm better understand the nature of technology and stakeholders for the successful implementation of smart distribution technologies.