• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.182-206
• /
• 2003

Statement of problem : Successful osseointegration of endosseous threaded implants is dependent on many factors. These may include the surface characteristics and gross geometry of implants, the quality and quantity of bone where implants are placed, and the magnitude and direction of stress in functional occlusion. Therefore clinical quantitative measurement of primary stability at placement and functional state of implant may play a role in prediction of possible clinical symptoms and the renovation of implant geometry, types and surface characteristic according to each patients conditions. Ultimately, it may increase success rate of implants. Purpose : Many available non-invasive techniques used for the clinical measurement of implant stability and osseointegration include percussion, radiography, the $Periotest^{(R)}$, Dental Fine $Tester^{(R)}$ and so on. There is, however, relatively little research undertaken to standardize quantitative measurement of stability of implant and osseointegration due to the various clinical applications performed by each individual operator. Therefore, in order to develop non-invasive experimental method to measure stability of implant quantitatively, the resonance frequency analyzer to measure the natural frequency of specific substance was developed in the procedure of this study. Material & method : To test the stability of the resonance frequency analyzer developed in this study, following methods and materials were used : 1) In-vitro study: the implant was placed in both epoxy resin of which physical properties are similar to the bone stiffness of human and fresh cow rib bone specimen. Then the resonance frequency values of them were measured and analyzed. In an attempt to test the reliability of the data gathered with the resonance frequency analyzer, comparative analysis with the data from the Periotest was conducted. 2) In-vivo study: the implants were inserted into the tibiae of 10 New Zealand rabbits and the resonance frequency value of them with connected abutments at healing time are measured immediately after insertion and gauged every 4 weeks for 16 weeks. Results : Results from these studies were such as follows : The same length implants placed in Hot Melt showed the repetitive resonance frequency values. As the length of abutment increased, the resonance frequency value changed significantly (p<0.01). As the thickness of transducer increased in order of 0.5, 1.0 and 2.0 mm, the resonance frequency value significantly increased (p<0.05). The implants placed in PL-2 and epoxy resin with different exposure degree resulted in the increase of resonance frequency value as the exposure degree of implants and the length of abutment decreased. In comparative experiment based on physical properties, as the thickness of transducer increased, the resonance frequency value increased significantly(p<0.01). As the stiffness of substances where implants were placed increased, and the effective length of implants decreased, the resonance frequencies value increased significantly (p<0.05). In the experiment with cow rib bone specimen, the increase of the length of abutment resulted in significant difference between the results from resonance frequency analyzer and the $Periotest^{(R)}$. There was no difference with significant meaning in the comparison based on the direction of measurement between the resonance frequency value and the $Periotest^{(R)}$ value (p<0.05). In-vivo experiment resulted in repetitive patternes of resonance frequency. As the time elapsed, the resonance frequency value increased significantly with the exception of 4th and 8th week (p<0.05). Conclusion : The development of resonance frequency analyzer is an attempt to standardize the quantitative measurement of stability of implant and osseointegration and compensate for the reliability of data from other non-invasive measuring devices It is considered that further research is needed to improve the efficiency of clinical application of resonance frequency analyzer. In addition, further investigation is warranted on the standardized quantitative analysis of the stability of implant.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.4
• /
• pp.125-137
• /
• 2008

The purpose of this study was to improve the interest of food and nutrition area in Technology Home Economics subject as well as food safety and choice. For that, we developed new teaching-learning plan by using reading education method and applied to the 9th grade students in Buchun, Kyunggi-do. Experimental and control groups were selected based on their test score in nutrition section. Control and experimental groups were educated by general lecture or reading education method for 4 weeks and the effect of different educational methods was tested. The results of study as follow: First, teaching-learning plan by using reading education method has been developed. To apply reading education method, we developed reading record cards which could help students to understand the terminology and nutritional problems. In addition, students had time to discuss about food safety and choice after reading education which could improve the interest in Technology Home Economics subject and communication skills. Second, after applying the developed lesson plan, the results showed that reading education method improved the interest and attitude about Technology Home Economics subject and teacher, and food choice attitude. However, reading education method had no effect on the interest on reading book about food and nutrition, and These results suggested that reading education method improved the interest and recognition about Technology Home Economics subject and teacher and food choice attitude. Therefore, to establish the proper dietary behavior in junior high school students, we need to develop and apply diversity of teaching-learning plan by using reading educational method.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.469-491
• /
• 2014

Webtoon has developed the method that makes it possible to express sound visually. Also we can also hear sound in webtoon through the development of web technology. It is natural that we analyze the sound that we can hear, but we can also analyze the sound that we can not hear. This study is based on 'dual code' in cognitive psychology. Cartoonists can make visual expression on the basis of auditive impression and memory, and readers can recall the sound through the process of memory and memory-retrieval. This study analyzes both audible sound and inaudable sound. Concise analysis owes the method to film sound theory. Three main factor, Volume, pitch, and tone are recognized by frequency in acoustics. On the other hand they are expressed by the thickness and site of line and image of sound source. The visual expression of in screen sound and off screen sound is related to the frame of comics. Generally the outside of frame means off sound, but some off sound is in the frame. In addition, horror comics use much sound for the effect of genre like horror film. When analyzing comics sound using this kinds of the method film sound analysis, we can find that webtoon has developed creative expression method comparing with simple ones of early comics. Especially arranging frames and expressing sound following and vertical moving are new ones in webtoon. Also types and arrangement of frame has been varied. BGM is the first in using audible sound and recently BGM composed mixing sound effect is being used. In addition, the program which makes it possible for readers to hear sound according to scroll moving. Especially horror genre raise the genre effects using this technology. Various methods of visualizing sound are being created, and the change shows that webtoon could be the model of convergence in contents.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.4
• /
• pp.1089-1121
• /
• 2017

'Technological convergence' is the recent innovation trend which facilitates to solve social crux as well as to generate new industries. Korean government research institutes (GRIs) have taken a pivotal role for economic growth which capitalized on technology-oriented strategies. Recently, the policy interests on the transition of their role and mission towards multidisciplinary research organization is increasingly shed lights. This study regards the collaborative activities as one of the key success factors in the multidisciplinary research. In this sense, this study sets research purposes as follows: First, we intend to define a concept and to confine a scope of multidisciplinary research from the view point of R&D purposes and problem-solving process. Second, we categorize the collaboration and the relevant performances which reflect the characteristics of the multidisciplinary research. Third, we analyze the characteristics of collaborative activities and the effects of strength on the research performances. To this end, this study conducted a survey of 104 research project directors, which have experienced at least one of two types of multidisciplinary research projects through National R&D project or NST (National Research Council of Science & Technology) convergence research project. Then, we conducted regression analysis by utilizing the survey results in order to verify the relation between the collaborative activities and the performances. As results of analyses, first, the diversification of collaboration partners was a salient factor in the process of knowledge creation. Second, collective works among the researchers in similar area and domain enhanced mission-oriented technology development projects such as patent creation or technology transfer. Third, we verified that the diversity of created knowledge and the degree of relation continuity between researchers increased in the condition of guaranteeing individual researcher's independence and autonomy as well as sharing various technological capabilities. These results provide the future policy directions related to the methods to measure the collaboration and performance analysis for multidisciplinary research.

• Radiation Oncology Journal
• /
• v.23 no.2
• /
• pp.123-130
• /
• 2005

Purpose: We wanted to improve the setup reproducibility of breast cancer patients when utilizing a commercially available breast board for radiation therapy. The breast board was modified by using a new head rest and 2 types of board fixation devices. Materials and Methods: A conventional head/neck rest was modified to be positioned in various slots of the breast board, and it was fabricated 1 cm thinner to provide more comfort to a patient when the patient's neck was rotated. This rest improves the uncertainty of the daily setup. Also, the sagging problems at the left and right sides became negligible with the two types of board fixation devices: (1) the stair type, and (2) the arm type. The first device consists of an upper/lower holder with 4 stair-types of grooves and 4 rectangular Inserts. In order to cover the whole range of vertical setup of the breast board, 4 rectangular inserts were needed, and each covered 10 steps. The arm-type fixation device was also fabricated and attached to the breast board, It had two aluminum bars that were fixed by utilizing a lock-type of screw. These devises were evaluated with two volunteers in order to prove the effectiveness of the improved setup accuracy. Results; The developed cranio-caudal fixation device demonstrated that it could reduce the cranio-caudal error by nearly $55\%$ compared to the old device. As for left-and-right inclination, the stair-type and arm-type fixation devices can reduce the relative inclination by nearly $80\%$ and $90\%$, respectively, compared to the breast board without the fixation device. Conclusion: It was verified that the developed devices were effective for positioning the patients and for avoiding inclination of the breast board.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• Journal of the Korean earth science society
• /
• v.42 no.2
• /
• pp.201-220
• /
• 2021

The objective of this study is to increase awareness and interest regarding polar science and thereby aid in establishing the concept and future direction of polar literacy. To analyze the current status, textbooks based on the common school curriculum pertaining to polar topics were reviewed. Six countries that actively conduct polar science, namely Korea, France, Japan, Germany, the United States, and the United Kingdom, were chosen. Subsequently, 402 cases in 110 science and social studies (geography) textbooks of these countries were analyzed through both quantitative and qualitative methods. Based on the obtained results, the importance of polar research in geoscience education and the need for spreading awareness regarding polar research as an indicator of global environmental changes were examined. It was found that the primary polar topics described in the textbooks are polar glaciers, polar volcanism, solid geophysics, polar infrastructure, and preservation of geological resources and heritage. This demonstrates that the polar region is a field of research with important clues to Earth's past, present, and future environments and is also a good teaching subject for geological education. However, an educational approach is needed for systematically laying emphasis on polar research. The implications of this study are manifold, such as the establishment of a cooperative system between polar scientists and educators, extraction of core concepts for polar literacy and content reconstruction, discovery of new polar topics associated with the curriculum, diversification of forms of presentation in textbooks, and development of an affective image that is based on correct cognitive understanding. Furthermore, through the continuance of polar topics in textbooks, students can improve their awareness regarding polar literacy and polar science culture, which in turn will serve as the driving force for sustainable polar research in the future.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.15-28
• /
• 2019

Purpose Nuclear medicine was initially introduced in Korea in 1969 and widely applied to treat hyperthyroidism with $^{131}I$. Also, gamma camera was adopted in 1969 in the first place and its application has been growing continually in many ways. We analyzed long-term trend in nuclear medicine examinations for the last 2 decades. The purpose of this paper is to make predictions and to set both plans and directions on the development of nuclear medicine. Materials and Methods We analyzed the performance of nuclear medicine examinations and therapies performed in Asan Medical Center from 1998 to 2017. Results Results from the last 20 years regarding Bone scan, Renal scan, MUGA scan and $^{18}F$-FPCIT, Bone Mineral Density were on a increase. And Myocardium perfusion SPECT, Thyroid scan, Lung scan were on a decrease while $^{18}F-FDG$ PET maintained on a steady course. Until 2010 there was a positive performance with the therapy but after the excessive medical care in thyroid examination performance is at status quo. Key events such as a medical strike(2000), Middle-East Respiratory Syndrome (2015) influenced the overall performance of the therapy. Conclusion In order to promote a long-term growth in nuclear medicine examination and therapy, it is inevitable to respond to the changes in current medical environment. Furthermore, it is strongly suggested to put efforts to maintain and develop new examinations and clinical indicators.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.3
• /
• pp.13-29
• /
• 2021

The purpose of this study was to analyze the spatial distribution and location factors of startups by generation (young and middle-aged) in Seoul. To this end, a research model was established that included factors of industry, population, and startup institutions by generation in 424 administrative districts using the Seoul Business Enterprise Survey(2018), which includes data on the age group of entrepreneurs. As an analysis method, descriptive statistics were conducted to confirm the frequency, average and standard deviation of startups by generation and major variables in the administrative districts of Seoul, and spatial distribution and characteristics of startups by generation were analyzed through global and local spatial autocorrelation analysis. In particular, the spatial distribution of startups in Seoul was confirmed in-depth by categorizing and analyzing startups by major industries. Afterwards, an appropriate spatial regression analysis model was selected through the Lagrange test, and based on this, the location factors affecting startups by generation were analyzed. The main results derived from the research results are as follows. First, there was a significant difference in the spatial distribution of young and middle-aged startups. The young people started to startups in the belt-shaped area that connects Seocho·Gangnam-Yongsan-Mapo-Gangseo, while middle-aged people were relatively active in the southeastern region represented by Seocho, Gangnam, Songpa, and Gangdong. Second, startups by generation in Seoul showed various spatial distributions according to the type of business. In the knowledge high-tech industries(ICT, professional services) in common, Seocho, Gangnam, Mapo, Guro, and Geumcheon were the centers, and the manufacturing industry was focused on existing clusters. On the other hand, in the case of the life service industry, young people were active in startups near universities and cultural centers, while middle-aged people were concentrated on new towns. Third, there was a difference in factors that influenced the startup location of each generation in Seoul. For young people, high-tech industries, universities, cultural capital, and densely populated areas were significant factors for startup, and for middle-aged people, professional service areas, low average age, and the level of concentration of start-up support institutions had a significant influence on startup. Also, these location factors had different influences for each industry. The implications suggested through the study are as follows. First, it is necessary to support systematic startups considering the characteristics of each region, industry, and generation in Seoul. As there are significant differences in startup regions and industries by generation, it is necessary to strengthen a customized startup support system that takes into account these regional and industrial characteristics. Second, in terms of research methods, a follow-up study is needed that comprehensively considers culture and finance at the large districts(Gu) level through data accumulation.

• The Journal of Korean society of community based occupational therapy
• /
• v.11 no.1
• /
• pp.11-22
• /
• 2021

Objective : The purpose of this study was to investigate the changes in occupational balance and quality of life caused by COVID-19 in occupational therapy students. Methods : From May 27 to June 26, 2020, questionnaires were distributed to a total of 35 universities among 62 occupational therapy departments nationwide. General characteristics, COVID-19 related characteristics, OBQ and WHOQOL-BREF were used to evaluate and analyze occupational balance and quality of life. The SPSS/PC 24.0 program was used to analyze frequency analysis, crossover analysis, chi-square test, independent t-test, analysis of variance, and Pearson correlation analysis. Results : There were significant differences in school system(years), class, life pattern, quality of life, personal and public schedule depending on whether they are interested in occupational balance. There were significant differences in occupational balance(OBQ) and quality of life(WHOQOL-BREF), 'Hobby', 'new hobbies after COVID-19', 'life patterns', 'use of public transportation', 'maintenance of occupational balance', and 'quality of life'. There was a significant positive correlation occupational balance and quality of life. Conclusion : This study showed that the more people who have changed their lives due to COVID-19 are interested in work balance, and the better they maintain their work balance and emotional well-being, the higher the work balance and quality of life, and the positive correlation between work balance and quality of life was confirmed. This will be the basis for studies related to intervention strategies that can improve occupational balance and quality of life in a time when social isolation is easy due to the COVID-19 epidemic.