• 한국주조공학회지
• /
• 제24권5호
• /
• pp.281-289
• /
• 2004

The present study focused on the estimation of the interfacial heat transfer coefficient as a function of the surface temperature of the aluminum casting at the mold/casting interface to investigate the effects of superheat and coating layer. The casting experiments of aluminum into a cylindrical copper mold were systematically conducted to obtain the thermal history during solidification. The thermal history recorded by four thermocouples embedded both in the mold and the casting was used to solve the inverse heat conduction problem using Beck's method. The effects of superheat and coating on the interfacial heat transfer coefficient in the liquid state, during the solidification, and in the solid state were comparatively discussed. In the liquid state, the interfacial heat transfer coefficient is thought to be affected by the roughness of the mold, the wettability of the casting on the mold surface, and the thermophysical properties of the coating layer. When the solidification begins, the air gap forms between the casting and the mold, and the interfacial heat transfer coefficient becomes a function of the air gap as well as surface roughness and the superheat. In the solid phase, it depends only upon the thermal conductivity and the thickness of the air gap. The coating layer reduces seriously the interfacial heat transfer coefficient in the liquid state and during the solidification.

• Bulletin of the Korean Chemical Society
• /
• 제27권11호
• /
• pp.1769-1774
• /
• 2006

A new liquid chromatographic chiral stationary phase based on (2S,3S)-O,O'-bis-(10-undecenoyl)-N,N'-bis-(3,5-dinitrobenzoyl)-2,3-diamino-1,4-butandiol was prepared starting from (2R,3R)-1,4-bis(benzyloxy)-2,3-butanediol. The new chiral stationary phase was applied to the resolution of racemic anilide derivatives of N-acetyl-a-amino acids, 1,1'-bi-2-naphthol and 3,3'-diaryl-1,1'-bi-2-naphthols. The CSP was also applied to the resolution of some chiral drugs including a diuretic, bendroflumethiazide, and non-steroidal anti-inflammatory agents such naproxen and alminoprofen. In every case, the chiral recognition efficiency of the new CSP was quite excellent.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.70.2-70
• /
• 1998

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2016년도 자성 및 자성재료 국제학술대회
• /
• pp.159-159
• /
• 2016

• Applied Microscopy
• /
• 제32권1호
• /
• pp.9-15
• /
• 2002

NACT 복합 페브로스카이트 화합물에 대한 미세조직 관찰을 X-ray diffractometer, neutron diffraction 그리고 TEM으로 관찰하였다. $0.3{\leq}x{\leq}0.9$일 때 NACT는 양이온의 1 : 1 chemical ordering 뿐만 아니라 산소팔면체의 antiphase와 inphase tilting을 보여준다. 따라서 APB와 ferroelastic domain 경계가 미세구조에 나타나 있다. X값이 0.3보다 작아지면, chemical ordering은 나타나지 않고 단지 산소팔면체의 antiphase tilting 만이 나타난다. 미세구조에는 tangled dislocation과 2차상이 또한 발견되었다.

• The Plant Pathology Journal
• /
• 제32권5호
• /
• pp.423-430
• /
• 2016

Clubroot disease caused by Plasmodiophora brassicae is one of the most serious diseases in Brassica crops worldwide. In this study, the pathotypes of 12 Korean P. brassicae field isolates were determined using various Chinese cabbage including 22 commercial cultivars from Korea, China, and Japan, and 15 inbred lines. All P. brassicae isolates exhibited the typical clubroot disease on non-clubroot resistant cultivar, indicating that the isolates were highly pathogenic. According to the reactions on the Williams' hosts, the 12 field isolates were initially classified into five races. However, when these isolates were inoculated onto clubroot-resistant (CR) cultivars of Chinese cabbage, several isolates led to different disease responses even though the isolates have been assigned to the same race by the Williams' host responses. Based on the pathogenicity results, the 12 field isolates were reclassified into four different groups: pathotype 1 (GN1, GN2, GS, JS, and HS), 2 (DJ and KS), 3 (HN1, PC, and YC), and 4 (HN2 and SS). In addition, the CR cultivars from Korea, China, and Japan exhibited distinguishable disease responses to the P. brassicae isolates, suggesting that the 22 cultivars used in this study, including the non-CR cultivars, are classified into four different host groups based on their disease resistance. Combining these findings, the four differential hosts of Chinese cabbage and four pathotype groups of P. brassicae might provide an efficient screening system for resistant cultivars and a new foundation of breeding strategies for CR Chinese cabbage.

• 한국재료학회지
• /
• 제12권7호
• /
• pp.550-554
• /
• 2002

The effect of Mn on cavitation erosion resistance and the sliding wear resistance of Fe-base hardfacing NewAlloy was investigated. Mn is known to decrease stacking fault energy and enhance the formation of $\varepsilon$-martensite. Cavitation erosion resistance for 50 hours and sliding wear resistance for 100 cycles were evaluated by weight loss. Fe-base hardfacing NewAlloy showed more excellent cavitation erosion resistance than Mn-added NewAlloys. $\Upsilon-\alpha$' phase transformation that can enhance erosion resistance by matrix hardening occurred in every specimens. But, only in Mn free Fe-base hardfacing NewAlloy, the hardened matrix could repress the propagation of cracks that was initialed at the matrix-carbides interfaces more effectively than Mn-added NewAlloy The Mn free Fe-base hardfacing NewAlloy showed better sliding wear resistance than Mn-added alloys. Mn-addition up to 5wt.% couldn't increase the sliding wear and cavitation erosion resistance of Fe-base hardfacing alloy because it didn't make $\Upsilon\to\varepsilon$ martensite phase transformation. Therefore, it is considered that the cavitation erosion and the sliding wear resistance can be improved due to $\Upsilon\to\varepsilon$ martensite phase transformation when Mn is added more than 5wt.% in Fe-base hardfacing alloys.

• 한국가구학회지
• /
• 제25권4호
• /
• pp.268-276
• /
• 2014

The purpose of this research is to provide new direction on the field of the furniture design and to establish the identity of Korean furniture design as the flow of craft's juxtapose mixture era where it mix and match Korean traditional craft style materials with the modern furniture design. In other words, it is intended to create new furniture design and propose beautiful Korean luxury furniture design based on the precious unique culture with the traditional craft style, juxtaposition of modern furniture, and reinterpretation. It should grant artistic values that can satisfy consumers having various tastes and scarcity values, plus it should put out aesthetic and creative expressions in furniture design putting into the beautiful traditional craft form values. Furthermore, it is required to create new design through values and spirit, materials, techniques, forms, pattern, and usages by interacting, coordinating, and combining tradition and modern East and West, plus craft and design.

• 한국산업융합학회 논문집
• /
• 제16권1호
• /
• pp.14-20
• /
• 2013

In this study, characteristic of new materials for repairing/reinforcement of sea and underwater structures using urethane were studied experimentally. As a results, following their good result was obtained. Materials and construction methods due to a chemical reaction, so no seams, shape or form, regardless of the variety of civil engineering in the field can be applied. Fast workability, hardening existing concrete compared with 80% in shortening. Than the existing large concrete pouring construction cost could be reduced by more than 30%.

• Steel and Composite Structures
• /
• 제23권3호
• /
• pp.339-350
• /
• 2017

In this paper, various nonlocal higher-order shear deformation beam theories that consider the size dependent effects in Functionally Graded Material (FGM) beam are examined. The presented theories fulfill the zero traction boundary conditions on the top and bottom surface of the beam and a shear correction factor is not required. Hamilton's principle is used to derive equation of motion as well as related boundary condition. The Navier solution is applied to solve the simply supported boundary conditions and exact formulas are proposed for the bending and static buckling. A parametric study is also included to investigate the effect of gradient index, length scale parameter and length-to-thickness ratio (aspect ratio) on the bending and the static buckling characteristics of FG nanobeams.