• 제목/요약/키워드: New Link

검색결과 1,454건 처리시간 0.026초

새로운 마그네틱 피드백 기법을 이용하여 낮은 링크 전압을 갖는 새로운 단일 전력단 역률 개선 AC/DC 컨버터 (Novel Single-Stage Power Factor Correction AC/DC Converter with Low DC Link Voltage using New Magnetic Feedback Technique)

  • 최은석;윤현기;김정은;문건우;윤명중
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2004년도 전력전자학술대회 논문집(2)
    • /
    • pp.528-532
    • /
    • 2004
  • Novel single-stage power factor correction AC/DC converter with low DC link voltage using new magnetic feedback technique is proposed in this paper. The Proposed converter has high power factor, tight output voltage regulation and low link capacitor voltage less than 450V for all the load range through the universal input line. This converter has also no dead-zone in the input current, which is seen in the conventional converter using the previous magnetic feedback technique. In this paper, the analysis of operations and features of the proposed converter is provided, and the experimental results of 90W-prototype shows the low harmonic distortions satisfied with EN 61000-3-2 Class D, high power factor and low link voltage less than 450V.

  • PDF

공진 DC 링크 스너버를 이용한 3상 전류형 PWM 컨버터 (Three-phase current type PWM converter using resonant DC Link snubber)

  • 서기영;이현우;이수흠;문상필;김영문
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 B
    • /
    • pp.1015-1019
    • /
    • 2001
  • This paper presents a novel three-phase current-fed Pulse Width Modulation converter with switched capacitor type resonant DC link commutation circuit operating PWM pattern strategy under a design consideration of low-pass filter, which can operate on the basis of the principle of zero current soft switching commutation. In the first place, the steady state operating principle of this converter with a new resonant DC link snubber circuit is described in connection with the equivalent operation circuit, together with the practical design procedure of the switched-capacitor type resonant DC link circuit is discussed from a theoretical viewpoint on the basis of a design example for high-power applications. The actively delayed time correction method to compensate distorted currents due to a relatively long resonant commutation time is newly implemented in the open loop control scheme so as to acquire the new optimum PWM pattern. Finally, the experiment of set-up in laboratory system of this converter is concretely demonstrated herein to confirm a zero current soft-switching commutation of this converter. The comparative evaluations between current-fed hard switching PWM and soft-switching PWM converters are carried out from a viewpoint of their PWM converter characteristics.

  • PDF

철도 신호시스템을 위한 새로운 통신 프로토콜의 성능해석 및 검증 (Formal Verification and Performance Analysis of New Communication Protocol for Railway Signaling Systems)

  • 이재호;황종규;박용진;박귀태
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제53권6호
    • /
    • pp.380-387
    • /
    • 2004
  • In accordance with the computerization of railway signaling systems, the interface link between the signaling systems has been replaced by a digital communication channel. At the same time, the importance of the communication link has become increasingly significant. However, there are some questionable matters in the current state of railway signaling systems in KNR. First, different communication protocols have been applied to create an interface between railway signaling systems although the protocols have the same functions. Next, the communication protocols currently used in the railway fields have some illogical parts such as structure, byte formation, error correction scheme, and so on. To solve these matters, the standard communication protocol for railway signaling systems is designed. The newly designed protocol is overviews in this paper. And the simulation is performed to analysis the performance of data link control for designed protocol. According to this simulation, it is identified that the link throughput of new protocol is improved about 10% and the frame error rate is improved than existing protocol. And it is verified the safety and liveness properties of designed protocol by using a formal method for specifying the designed protocol. It is expected that there will be an increase in safety, reliability and efficiency in terms of the maintenance of the signaling systems by using the designed communication protocol for railway signaling.

공진 DC 링크 스너버를 이용한 3상 전류형 PWM 컨버터의 해석 (analysis of three-phase current type PWM converter using resonant DC Link snubber)

  • 이상현;문상필;서기영;김영문;강욱중
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.55-59
    • /
    • 2002
  • This paper presents a novel three-phase current-fed Pulse Width Modulation converter with switched capacitor type resonant DC link commutation circuit operating PWM pattern strategy under a design consideration of low-pass filter, which can operate on the basis of the principle of zero current soft switching commutation. In the first place, the steady state operating principle of this converter with a new resonant DC link snubber circuit is described in connection with the equivalent operation circuit, together with the practical design procedure of the switched-capacitor type resonant DC link circuit is discussed from a theoretical viewpoint on the basis of a design example for high-power applications. The actively delayed time correction method to compensate distorted currents due to a relatively long resonant commutation time is newly implemented in the open loop control scheme so as to acquire the new optimum PWM pattern. Finally, the experiment of set-up in laboratory system of this converter is concretely demonstrated herein to confirm a zero current soft-switching commutation of this converter. The comparative evaluations between current -fed hard switching PWM and soft-switching PWM converters are carried out from a viewpoint of their PWM converter characteristics.

  • PDF

무효전력 보상 용량 증대 및 DC 링크 전압 저감을 위한 SVC 결합형 UPQC (SVC coupled UPQC for reactive power compensation capacity increase and DC link voltage reduction)

  • 표수한;박장현;오정식;박태식
    • 전기전자학회논문지
    • /
    • 제23권1호
    • /
    • pp.99-106
    • /
    • 2019
  • 본 논문에서는 UPQC 시스템과 SVC를 결합한 새로운 형태의 보상장치를 제안하고자 한다. 기존의 UPQC는 직렬형 인버터, 병렬형 인버터, DC 링크로 구성되어 있어있으며 우수한 전력품질 보상 성능을 보이지만 높은 인버터 정격을 요구한다. 제안된 방식은 직렬형 인버터, 병렬형 인버터와 DC 링크 그리고 병렬형 인버터의 출력단에 결합된 SVC로 구성되어 있으며, 기존 UPQC에 비해 넓은 무효전력 보상 범위와 낮은 DC 링크 전압의 장점을 가지고 있다. 또한, SVC가 결합된 새로운 UPQC의 구성은 Matlab 시뮬레이션을 통해 성능을 검증하였다.

Link-16 기반의 효율적인 공대지 항공작전 모델 설계 (Establishment for Efficiency Air-To-Ground Air Operation Model in Link-16)

  • 이형헌;장형준;김영구;임재성
    • 한국군사과학기술학회지
    • /
    • 제13권5호
    • /
    • pp.861-868
    • /
    • 2010
  • As CAS, X-ATK, and INT models considered as the most typical Air-to-Ground operation models in ROKAF are mainly designed as the voice-centered system between aircraft and ground control facilities, it is critical to newly develop the Link-16 based model for the ROK-US combined operation between F-15K, AWACS, M-SAM, and KDX-III equipped with Link-16. Former studies had been limited to the CAS operation, and they had mainly focused on reducing the voice transmission time to exchange the information between each mission step with maintaining existing operation steps. Therefore, this paper makes up the weak point in former studies, thereby designing new Air-to-Ground operation model for CAS, X-ATK, INT mission using Enterprise Architecture OV6c, which enables both aircraft and ground control facilities or between aircraft to obtain the real-time information on the location, identification, armament and the real-time image data through the broadcasting function. Based on the analysis of new operation model, we come to a conclusion that by simultaneously exchanging the information on mission between nodes concerned through the broadcasting function of Link-16. It is possible to cut down superfluous steps among the mission steps, and to reduce the mission time. It is clear that it gives rise to improve the battle efficiency and the decision-making tempo as well as the battlefield situational awareness.

무선 에지의 링크 오류율을 이용한 개선된 TCP 혼잡제어 (An Enhanced TCP Congestion Control using Link-Error Rates at Wireless Edges)

  • 오준석;박탄세;박창윤;정충일
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제16권7호
    • /
    • pp.794-798
    • /
    • 2010
  • 본 연구에서는 대부분의 무선 링크는 네트워크 에지에서 사용되고, NIC 드라이버가 무선 링크 오류율을 관찰하고 있다는 가정 하에, 기존 TCP의 혼잡제어를 수정한 TCP-L(TCP Link Aware)을 제안한다. TCP-L은 무선 링크 오류율을 이용해 유선 링크의 혼잡 손실률을 예측하여 무선 링크에서 세그먼트 손실이 발생했을 경우에 나타나는 성능 저하를 회피할 수 있다. 또한 실험을 통해 무선 링크 오류율이 높은 환경에서 다른 무선 TCP 보다 높은 처리율을 보이면서도 다른 유선 TCP 소스와의 형평성을 유지하는 것을 검증하였다. 본 연구의 접근 방법은 세그먼트 손실이 많거나 전송 지연이 산발적으로 발생하는 새로운 무선 환경, 즉 802.11 ACK-less와 인지 라디오(Cognitive Radio)와 같은 무선 링크에 효과적으로 적용될 수 있을 것으로 예상된다.

New Stability Analysis of a Single Link TCP Vegas Model

  • Park, Poo-Gyeon;Choi, Doo-Jin;Choi, Yoon-Jong
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.2430-2434
    • /
    • 2003
  • This paper provides a new approach to analyze the stability of TCP Vegas, which is a kind of feedback-based congestion control algorithm. Whereas the conventional approaches use the approximately linearized model of the TCP Vegas along equilibrium points, this approach uses the exactly characterized dynamic model to get a new stability criterion via a piecewise and delay-dependent Lyapunov-Krasovskii function. Especially, the resulting stability criterion is formulated in terms of linear matrix inequalities (LMIs). Using the new criterion, this paper shows that the current TCP Vegas algorithm is stable in the sufficiently wide region of network delay and link capacity.

  • PDF

직접전력변환 방식을 이용한 새로운 전압 sag/swell 보상기 (New Voltage Sag/Swell Compensator Using Direct Power Conversion Method)

  • 차한주;이대동
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.267-269
    • /
    • 2006
  • In this paper, a new single phase voltage sag/swell compensator using direct power conversion is introduced. A new compensator consists of input/output filter, series transformer and direct ac-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc-link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy to compensate voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method commonly required in the direct power conversion. Simulation results are shown to demonstrate the advantages of the new compensator and PWM strategy.

  • PDF

센서 네트워크를 위한 효율적인 애드-혹 라우팅 알고리즘 설계 (The Efficient Ad-Hoc Routing Algorithm Design for Sensor Network)

  • 이민구;이상학
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.420-422
    • /
    • 2004
  • The non-ideal characteristics of wireless communication are found in sensor network. And sensor network must also address new raised issues. The efficient ad-hoc routing algorithm is considered the nice solution for new raised sensor network problems. To design this efficient ad-hoc routing algorithm, we study and evaluate new components in routing algorithm. Namely, new components are Link estimator, Neighbor table and Parent selection. We have tested this related experiment using the TIP-30C. TIP-30C is sensor network node that is designed by KETI(Korea Electronic Technology Institute).

  • PDF