• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.185-194
• /
• 2008

When forecasting demand for a new road, a select link analysis is usually used to understand the OD pairs that send trips along paths that use the selected link (i.e., the new road). These OD pairs and their associated volumes are listed in a select link analysis. However, there is no research about other methods to obtain these results, so experts are almost always dependent on select link analysis results to obtain these results. The purpose of this study is to propose a model with a different approach from select link analysis to obtain the previously mentioned results. Time and spatial characteristics of networks are used in this new approach. Select link analysis results are used as a comparison index for the results by the proposed model. Also, two case studies (interzonal trips and intracity trips) are performed to validate the significance of the model. Consequently, a correlation coefficient between the results by the proposed model and the comparison index shows high significance: 0.82.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1045-1053
• /
• 2012

Link-16 is a widely used TDL (Tactical Data Link) which uses TDMA (Time Division Multiple Access). Link-16 is a very low rate system, so it supports small size of data like tactical message and voice. However, there are related works to transmit situation awareness information like image due to the increasing interest about EBO(Effect-Based Operation), recently. Special TDMA scheduling is needed not static TDMA of Link-16 for image transmission because image data has much larger size than the existing tactical data. In this paper, we proposed Link-16K which enhances the Link-16 MAC. The proposed Link-16K is compatible with Link-16, and includes dynamic TDMA, new packing method, and an efficient retransmission scheme for image transmission effectively. We can see that image transmission delay is reduced and channel utilization is increased through simulation results of proposed idea.

• Journal of Communications and Networks
• /
• v.12 no.3
• /
• pp.209-215
• /
• 2010

In an asymmetrical speed channel environment like asymmetric digital subscriber line, the up-link bandwidth is normally smaller than the down-link bandwidth, which will lead to extremely low utilization of down-link bandwidth when current P2P video transmission is applied. To overcome this, a new fast P2P video transmission method applied in an asymmetrical speed channel environment is proposed in this paper. On the basis of the many-to-one concept, the proposed method uses a new multipeer aggregation technique to enhance the utilization of down-link bandwidth. In addition, an adaptive peer assignment algorithm is also introduced in order to minimize the overall transmission time. Experimental results show that by using our proposed method, the utilization of down-link bandwidth is significantly improved, and the overall transmission time is greatly reduced.

• Journal of Advanced Navigation Technology
• /
• v.17 no.3
• /
• pp.285-291
• /
• 2013

This paper proposed a new STM-based media streaming scheme to assure the wireless ad hoc link quality. The proposed scheme can assure the link quality by the stream monitoring, assurance, and update procedure, and it can be monitored the media frame by streaming time $t_{new}$. This paper minimizes the link error rate and re-transmission rate using the media streaming update based on the frame size. The simulation results show thst the proposed scheme outperforms STCP and RMST.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1983.10a
• /
• pp.108-111
• /
• 1983

This paper presents a new method for the optimum capacity assignment in store-and-forward communication networks under a total fixed-capacity constraints. Any two link capacities needed in this method can have the desirable quantites and then other capacities can be obtained from the fixed two link capacities. When the minimum and the maximum capacities that are the quantites of the conventional method are fixed, the total average time delay from the new method is almost the same as that from the conventional method. And when the minimum capacity is fixed, the new method gives smaller average time delay.

• Structural Engineering and Mechanics
• /
• v.46 no.4
• /
• pp.487-504
• /
• 2013

In the present work a new friction device, with a set of single or double rotational friction flanges and a link element, is described and tested. The mechanism may be applied for the strengthening of existing r/c or steel buildings as well as in new constructed buildings. The device has selectable variable behavior in different levels of displacement and an interlock mechanism that is provided by the link element. The link element may be designed to lock at preselected level of displacement, offering in this way an extra safety reserve against strong earthquakes. A summary of the existing literature about other similar mechanisms is initially presented in this paper. The proposed mechanism is presented and described in details. Laboratory experiments are presented in detail and the resulted response that proves the efficiency of the mechanism at selectable levels of strength capacity is discussed. Drawings of the mechanism attached to a r/c frame with connection details are also included. Finally a dynamic analysis of two r/c frames, with and without the proposed mechanism attached, is performed and the resulted response is given. The main conclusion is that the proposed mechanism is a cheap and efficient devise for the improvement of the performance of new or existing framed buildings to seismic loads.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.5-17
• /
• 2000

cdma2000 offers several enhancement as compared to TIA/EIA-95, although it remains fully compatible with TIA/EIA-95 systems and allows for a smooth migration from one to the other-Major new capability include:1)connectivity to GSM-MAP in addition to IP and IS-41 networks; 2) new layering with new LAC and MAC architectures for improved service multiplexing and QoS management and efficient use of radio resource ;3) new bands and band widths of operation in support of various operator need and constraints, as well as desire for a smooth and progressive migration to cdma 2000; and 4) flexible channel structure in support of multiple services with various QoS and variable transmission rates at up to 1 Mbps per channel and 2 Mbps per user. Given the phenomenal success of wireless services and desire for higher rate wireless services. improved spectrum efficiency was a major design goal in the elaboration of cdma2000. Major capacity enhancing features include; 1) turbo coding for data transmission: 2)fast forward link power control :3) forward link transmit diversity; 4) support of directive antenna transmission techniques; 5) coherent reverse link structure; and 6) enhanced access channel operation. As users increasingly rely on their cell phone at work and at home for voice and data exchange, the stand-by time and operation-time are essential parameters that can influence customer's satisfaction and service utilization. Another major goal of cdma2000 was therefore to enable manufacturers to further optimize power utilization in the terminal. Major battery life enhancing features include; 1) improved reverse link performance (i.e., reduced transmit power per information bit; 2) new common channel structure and operation ;3) quick paging channel operation; 4) reverse link gated transmission ; and 5) new MAC stated for efficient and ubiquitous idle time idle time operation. this article provides additional details on those enhancements. The intent is not to duplicate the detailed cdma2000 radio access network specification, but rather to provide some background on the new features of cdma2000 and on the qualitative improvements as compared to the TIA/EIA-95 based systems. The article is focused on the physical layer structure and associated procedures. It therefore does not cover the MAC, LAC, radio resource management [1], or any other signaling protocols in any detail. We assume some familiarity with the basic CDMA concepts used in TIA/EIA-95.

• Journal of Scientific & Technological Knowledge Infrastructure
• /
• s.7
• /
• pp.134-140
• /
• 2001

To know about the performance of KREONET, we installed an active network performance measurement tool, PingER. For customization, we modified its architecture and some codes. Although this customization is a minor change of PingER, it gives much benefit and convenience for both operators and users. Using PingER, we can measure the effect of the STAR TAP link. The new networking through the link is a little bit slower than the previous networking. But the new link shows far fewer packet losses and provides more reliable networking.

• Journal of Communications and Networks
• /
• v.10 no.3
• /
• pp.331-337
• /
• 2008

In this paper, we investigate survivability in wavelength division multiplexing (WDM) mesh networks and propose a new algorithm called improved shared-path protection (ISPP) to completely tolerate the double-link failures. Compared with previous algorithms for protecting double-link failures, i.e., shared-path protection (SPP) and shared-link protection (SLP), the advantage of ISPP is to allow primary paths and backup paths to share the mixed wavelength-links based on the proposed new rules in which some primary wavelength-links can be changed to mixed wavelength-links, which can be shared by primary paths and backup paths. In addition, some mixed wavelength-links also can be shared by different backup paths for saving resources. Simulation results show that ISPP algorithm performs better in resource utilization ratio and blocking probability than conventional SPP and SLP algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1586-1594
• /
• 2011

LED-ID (light emitting diode - identification) technology is the new paradigm in the identification technology environment. LED-ID system typically needs line of sight (LOS) that supports narrow FOV transceivers links to achieve high data rate. On the other hand, narrow FOV reduces the coverage area. Therefore, the number of tags is increased significantly to cover the whole area. In this case number of link switching is increased when the reader moves within whole coverage area. Link switching delay is the important factor for the moving reader to maintain the communication with high data rate and better QoS. In this paper we propose in literature a new link switching scheme and measure the link switching delay time for LED-ID system. The simulation results show that the proposed link switching scheme is a possible candidate for multi-tag LED-ID system.