• Journal of Hydrogen and New Energy
• /
• v.27 no.1
• /
• pp.127-134
• /
• 2016

Most of reconstruction algorithms for the calculation of temperature distributions in CT (computed tomography)-TDLAS (tunable diode laser absorption spectroscopy) are based upon two-line thermometry method. This method gives unstable calculation convergence due to signal noise, bias error, and signal mis-matches. In this study, a new reconstruction algorithm based on cross-correlation for temperature calculation is proposed. The patterns of the optical signals at all wave lengths were used to reconstruct the temperature distribution. Numerical test has been made using phantom temperature distributions. Using these phantom temperature data, absorption spectra for all wave lengths were constructed, and these spectra were regarded as the signals that would be obtained in an actual experiments. Using these virtually generated experimental signals, temperature distribution was once again reconstructed, and was compared with those of the original phantom data. Calculation errors obtained by the newly proposed algorithm were slightly large at high temperatures with small errors at low temperature.

• Parasites, Hosts and Diseases
• /
• v.59 no.2
• /
• pp.113-119
• /
• 2021

The computer vision diagnostic approach currently generates several malaria diagnostic tools. It enhances the accessible and straightforward diagnostics that necessary for clinics and health centers in malaria-endemic areas. A new computer malaria diagnostics tool called the malaria scanner was used to investigate living malaria parasites with easy sample preparation, fast and user-friendly. The cultured Plasmodium parasites were used to confirm the sensitivity of this technique then compared to fluorescence-activated cell sorting (FACS) analysis and light microscopic examination. The measured percentage of parasitemia by the malaria scanner revealed higher precision than microscopy and was similar to FACS. The coefficients of variation of this technique were 1.2-6.7% for Plasmodium knowlesi and 0.3-4.8% for P. falciparum. It allowed determining parasitemia levels of 0.1% or higher, with coefficient of variation smaller than 10%. In terms of the precision range of parasitemia, both high and low ranges showed similar precision results. Pearson's correlation test was used to evaluate the correlation data coming from all methods. A strong correlation of measured parasitemia (r²=0.99, P<0.05) was observed between each method. The parasitemia analysis using this new diagnostic tool needs technical improvement, particularly in the differentiation of malaria species.

• Computational Structural Engineering
• /
• v.8 no.1
• /
• pp.127-136
• /
• 1995

In this paper the stochastic FE analysis considering the material and geometrical property of the plate structure is performed by the weighted integral method. To consider the stochasity of the material and geometrical property, the stochastic field is assumed respectively. The mean value of the stochastic field is 0 and the value of variance is assumed as 0.1. The characteristics of the assumed stochastic field is represented by auto-correlation function. This auto-correlation function is used in evaluating the response variability of the plate structure. In this study a new auto-correlation function is derived to concern the uncertainty of the plate thickness. The newly derived auto-correlation function is a function of auto-correlation function and coefficient of variation of the assumed stochastic field. The two results, obtained by proposed Weighted Integral method and Monte Carlo Simulation method, are coincided with each other and these results are almost equal to the theoretical result that is derived in this study. In the case of considering the variability of plate thickness, the obtained result is well coincide with those of Lawrence and Monte Carlo simulation.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.5
• /
• pp.35-43
• /
• 1999

In this paper, a new robust adaptive algorithm and a post-processing method are proposed to improve the performance of AEC without computational burden. Its step-size is normalized by the sum of the powers of the reference input signal and the desired signal. When the near-end speaker's speech and noise are applied into the microphone, the step-size becomes small and the misalignment of coefficients are reduced. To reduce the residual echoes, a new post-processing method, which is co-operated with the proposed noise-robust adaptive algorithm, is proposed in this paper. The method is based on the correlation of the desired signal and the estimation error signal. The residual echoes are attenuated as proportional to the correlation normalized with the power of desired signals. The normalized correlation plays a role as Wiener filter for residual echoes. In the double-talk situation, the estimation error signals, that are residual echoes, dominantly include the near-end speaker's speech and the normalized correlation closes to 1. Therefore, the near-end speaker's speech can be transmitted without being attenuated. When the desired signals consists of only the acoustic echoes, the residual echoes are mostly attenuated and canceled by the proposed post-processor. The computation of AEC using the proposed post-processor is comparable to NLMS algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.464-470
• /
• 2016

This paper presents a speech recognition database verification system using speech measures, and describes a speech measure extraction algorithm which is applied to this system. In our previous study, to produce an effective speech quality measure for the system, we propose a combination of various speech measures which are highly correlated with WER (Word Error Rate). The new combination of various types of speech quality measures in this study is more effective to predict the speech recognition performance compared to each speech measure alone. In this paper, we increase the system independency by employing GMM acoustic score instead of HMM score which is obtained by a secondary speech recognition system. The combination with GMM score shows a slightly lower correlation with WER compared to the combination with HMM score, however it presents a higher relative improvement in correlation with WER, which is calculated compared to the correlation of each speech measure alone.

• New & Renewable Energy
• /
• v.8 no.2
• /
• pp.14-23
• /
• 2012

The TMY (Typical Meteorological Year) for the solar energy study is generated using observation data with 22 solar sites from KMA (Korea Meteorological Administration) during 11 years (2000-2010). The meteorological data for calculation the TMY are used solar radiation, temperature, dew point temperature, wind speed and humidity data. And the TMY is calculated to apply the FS (Finkelstein and Schafer) statistics and RMSE (Root Mean Squared Error) methods. FS statistics performed with each point and each variable and then selected top five candidate TMM months with statistical analysis and normalization. Finally TMY is generated to select the highest TMM score with evaluation the average errors for the 22 whole points. The TMY data is represented average state and long time variations with 22 sites and meteorological data. When TMY validated with the 11-year daily solar radiation data, the correlation coefficient was about 0.40 and the highest value is 0.57 in April and the lowest value is 0.23 in May. Mean monthly solar radiation of TMY is 411.72 MJ which is 4 MJ higher than original data. Average correlation coefficient is 0.71, the lowest correlation is 0.43 in May and the highest correlation is 0.90 in January. Accumulated annual solar radiation by TMY have higher value in south coast and southwestern region and have relatively low in middle regions. And also, differences between TMY and 11-year mean of is distributed lower 100 MJ in Kyeongbuk, higher 200 MJ in Jeju and higher 125 MJ in Jeonbuk and Jeonnam, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.619-626
• /
• 2013

The design of PN(Pseudo Noise) sequences with good cross-correlation properties is important for many research areas in communication systems. In this paper we propose new family of binary sequences $S^r=\{Tr_1^m\{[Tr_m^n(a{\alpha}^t+{\alpha}^{dt})]^r\}{\mid}a{\in}GF(2^n),\;0{\leq}t<2^n-1\}$ composed of Gold-like sequences and find the value of cross-correlation function when $d=2^{n-1}(3{\cdot}2^m-1)$, where n=2k, gcd(r, $2^m-1$)=1. Also we analyze the linear span of $S^r$ for some special r. Proposed sequences are extension of Gold-like sequences and GMW-sequences.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.2 s.8
• /
• pp.181-193
• /
• 1996

A new technique for land cover classification which applies digital image pre-classified by unsupervised classification technique, clustering, to Canonical Correlation Analysis(CCA) was proposed in this paper. Compared with maximum likelihood classification, the proposed technique had a good flexibility in selecting training areas. This implies that any selected position of training areas has few effects on classification results. Land cover of each cluster designated by CCA after clustering is able to be used as prior information for maximum likelihood classification. In case that the same training areas are used, accuracy of classification using Canonical Correlation Analysis after cluster analysis is better than that of maximum likelihood classification. Therefore, a new technique proposed in this study will be able to be put to practical use. Moreover this will play an important role in the construction of GIS database

• Nuclear Engineering and Technology
• /
• v.23 no.2
• /
• pp.200-209
• /
• 1991

A new semi-empirical average heat transfer correlation applicable for both laminar and turbulent film-wise condensation on a vertical surface has been presented. Re functional form of the present correlation is based on the representative existing correlations for laminar and turbulent film flows, whereas the numerical coefficients of the present correlation have been determined by the least squares method using experimental data obtained from the open literatures. In addition, the performance of the present as well as the seven existing correlations (four for laminar and three for turbulent film flow regimes) were evaluated for their accuracy and the range of application. The result shows that for laminar film filow regimes Zazuli's and the present correlations give the samllest values of mean error, whereas for turbulent film How regimes Kirkbride and Badger's and the present correlations produce the smallest values of mean error.

• Convergence Security Journal
• /
• v.17 no.5
• /
• pp.35-40
• /
• 2017

The control system can have such threats as information leakage and falsification through various routes due to communications network fusion with public network. As the issues about security and the infringe cases by new attack methods are diversified recently, with the security system that makes information data database by simply blocking and checking it is difficult to cope with new types of threats. It is also difficult to respond security threats by insiders who have security access authority with the existing security equipment. To respond the threats by insiders, it is necessary to collect and analyze Event Log occurring in the internal system realtime. Therefore, this study could find out whether there is correlation of the elements among Event Logs through correlation analysis based on Event Logs that occur real time in the control system, and based on the analysis result, the study is expected to contribute to studies in this field.