• Nuclear Engineering and Technology
• /
• 제38권1호
• /
• pp.93-98
• /
• 2006

The radial uniformity of neutron irradiation in silicon ingots for neutron transmutation doping (NTD) at HANARO is examined by both calculations and measurements. HANARO has two NTD holes named NTD1 and NTD2. We have been using the NTD2 hole for 5 in. NTD commercial service, and we intend to use two holes for 6 in. NTD. The objective of this study is to predict the radial uniformity of 6 in. NTD at the two holes. The radial neutron flux distributions inside single crystal and noncrystal silicon loaded at the NTD2 hole are calculated by the VENTURE code. For NTD1, the radial distributions of the reaction rate for a 6 in. NTD with a neutron screen are calculated by MCNP, and measured by gold wire activation. The results of the measurements are compared with those of the calculations. From the VENTURE calculation, it is confirmed that the neutron flux distribution in the single crystal silicon is much flatter than that in the non-crystal silicon. The non-uniformities of the measurements for radial neutron irradiation are slightly larger than those of the calculations. However, excluding local dips in the measurements, the overall trends of the distributions are similar. The radial resistivity gradient (RRG) for a 5 in. silicon ingot is estimated to be about $1.5\%$. For a 6 in. ingot, the RRG of a silicon ingot irradiated at HANARO is predicted to be about $2.1\%$. Also, from the experimental results, we expect that the RRG would not be larger than $4.4\%$.

• Nuclear Engineering and Technology
• /
• 제38권7호
• /
• pp.675-680
• /
• 2006

The neutron transmutation doping of silicon (NTD), as a method to produce a high quality semiconductor, utilizes the transmutation of a silicon element into phosphorus by neutron absorption in a silicon single crystal. In this paper, we present the design of a neutron screen for a 6' Si ingot irradiation in the NTD2 hole of HANARO. The goal of the design is to achieve an even flat axial distribution of the resistivity, or $Si^{30}(n,{\gamma})Si^{31}$ reaction rate, in the irradiated Si ingot. We used the MCNP4C code to simulate the neutron screen and to calculate the reaction rate distribution in the Si ingot. The fluctuations in the axial distribution were estimated to be within ${\pm}2.0%$ from the average for the final neutron screen design; thus, they satisfy the customers' requirement for uniform irradiation. On the other hand, we determined the optimal insertion depths of the Si ingots by varying the critical control rod position, which greatly affects the axial flux distribution.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.232.1-232
• /
• 2002

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.62-66
• /
• 2002

The conventional floating zone(FZ) crystal and Czochralski(CZ) silicon crystal have resistivity variations longitudinally as well as radially The resistivity variations of the conventional FZ and CZ crystal are not conformed to requirement of dopant distribution for power devices and thyristors. These resistivity variations in conventional cystals limits the reverse breakdown voltage that could be achieved and forced designers of high power diodes and thyristors to compromise the desired current-voltage characteristics. So to produce high Power diodes and thyristors, Neutron Transmutation Doping(NTD) technique is the one method just because NTD silicon provides very homogeneous distribution of doping concentration. This procedure involves the nuclear transmutation of silicon to phosphorus by bombardment of neutron to the crystal according to the reaction $^{30}$ Si(n,${\gamma}$)longrightarrow$^{31}$ Silongrightarrow(2.6 hr)$^{31}$ P+$\beta$$^{[-10]}$ . The radioactive isotope $^{31}$ Si is formed by $^{31}$ Si capturing a neutron, which then decays into the stable $^{31}$ P isotope (i.e., the donor atom), whose distribution is not dependent on the crystal growth parameters. In this research, neutron was irradiated on FZ silicon wafers which had high resistivity(1000~2000 Ω cm), for 26 and 8.3hours for samples of HTS-1 and HTS-2, and 13, 3.2, 2.0 hours for samples of IP-1, IP-2 and IP-3, respectively, to compare resistivity changes due to time differences. The designed resistivities were approached, which were 2.l Ωcm for HTS-1, 7.21 Ω cm for HTS-2, 1.792cm for IP-1, 6.83 Ωcm for IP-2, 9.23 Ωcm for IP-3, respectively. Point defects were investigated with Deep Level Transient Spectroscopy(DLTS). Four different defects were observed at 80K, 125K, 230K, and above 300K.

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.603-609
• /
• 2008

Photoluminescence (PL) of neutron-irradiated GaN films and nanowires is investigated in this study. The GaN films and nanowires were irradiated by neutron beams in air at room temperature, and the neutron-irradiated films and nanowires were annealed in an atmosphere of $NH_3$ at temperatures ranging from 500 to $1100^{\circ}C$. The line-shapes of the PL spectra taken from the neutron-irradiated GaN films and nanowires were changed differently with increasing annealing temperature. In this study, light-emitting centers created in the neutron-irradiated GaN films and nanowires are examined and their origins are discussed. In addition, it is suggested here that the neutron-transmutation-doping is a simple and useful means of homogeneous impurity doping into nanowires with control of the doping concentration.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.155-161
• /
• 2001

반도체 소자의 기판 재료로 사용되고 있는 실리콘 웨이퍼는 그 정밀도가 매우 중요하다. 본 연구에서는 균일한 Dopant 농도 분포를 얻을 수 있는 중성자 변환 Doping을 이용하여 실리콘에 인(P)을 Doping하는 연구를 수행하였다. 중성자 변환 Doping, 즉 NTD(Neutron Transmutation Doping)란 원자번호 30인 실리론 동위원소에 중성자가 조사되면 원자번호 31인 실리콘으로 변환되고, 2.6시간의 반감기를 갖고 decay 되면서 인(P)으로 변하게 되어 실리콘 웨이퍼에 n-type 전도를 갖게 하는 것을 말한다. 본 연구에서는 하나로 원자로를 이용하여 고저항(1000-2000Ω㎝) FZ 실리콘 웨이퍼에 중성자 조사하여 저항의 변화를 관찰하였고, 중성자 조사시 발생하는 점결함을 분석하여 점결함이 저항 변화에 미치는 영향을 알아보았다. 중성자 조사 전 이론적 계산에 의해 16.8Ω㎝와 4.76Ω㎝의 저항을 얻을 수 있을 것으로 예상되었고, 중성자 조사 후 SRP로 측정한 결과 실리콘 웨이퍼가 3Ω㎝과 2.5Ω㎝의 저항을 가지고 있을 확인할 수 있었으며, FT-IR 분석결과 점결함의 변화 양상을 확인할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.442-449
• /
• 2010

Recently, the neutron irradiation for large diameter silicon (Si)-ingots of more than 8" diameter is requested to satisfy the demand for the neutron transmutation doping silicon (NTD-Si). By increasing the Si-ingot diameter, the radial non-uniformity becomes larger due to the neutron attenuation effect, which results in a limit of the feasible diameter of the Si-ingot. The current evaluation method has a certain limit to precisely evaluate the radial uniformity of Si-ingot because the current evaluation method does not consider the effect of the Si-ingot diameter on the radial uniformity. The objective of this study is to propose a new evaluation method of radial uniformity by improving the conventional evaluation approach. To precisely predict the radial uniformity of a Si-ingot with large diameter, numerical verification is conducted through comparison with the measured data and introducing the new evaluation method. A new concept of a gradient is introduced as an alternative approach of radial uniformity evaluation instead of the radial resistivity gradient (RRG) interpretation. Using the new concept of gradient, the normalized reaction rate gradient (NRG) and the surface normalized reaction rate gradient (SNRG) are described. By introducing NRG, the radial uniformity can be evaluated with one certain standard regardless of the ingot diameter and irradiation condition. Furthermore, by introducing SNRG, the uniformity on the Si-ingot surface, which is ignored by RRG and NRG, can be evaluated successfully. Finally, the radial uniformity flattening methods are installed by the stainless steel thermal neutron filter and additional Si-pipe to reduce SNRG.

• 한국산학기술학회논문지
• /
• 제3권3호
• /
• pp.165-169
• /
• 2002

반도체 소자의 기판 재료로 사용되고 있는 실리콘 웨이퍼는 그 정밀도가 매우 중요하다. 본 연구에서는 균일한 Dopant농도 분포를 얻을 수 있는 중성자 변환 Doping을 이용하여 실리콘에 인(P)을 Doping하는 연구를 수행하였다. 본 연구에서는 하나로 원자로를 이용하여 고저항(1000∼2000Ωcm) FZ실리콘 웨이퍼에 중성자 조사하여 저항의 변화를 관찰하였고, 중성자 조사시 발생하는 점결함을 분석하여 점결함이 저항 변화에 미치는 영향을 알아보았다. 중성자 조사 전 이론적 계산에 의해 HTS조사공은 5Ωcm, 20.1Ωcm이고 IP3조사공은 5Ωcm, 26.5Ωcm, 32.5Ωcm이었고, 중성자 조사 후 SRP로 측정한 결과 실제 저항값은 HTS-1 2.10Ωcm, HTS-2 7.21Ωcm이었고. IP-1은 1.79Ωcm, IP-2는 6.83Ωcm, 마지막으로 IP-3는 9.23Ωcm이었다. DLTS측정 결과 IP조사공에서 새로운 피크의 결함을 발견할 수 있었다. 또한 중성자 조사후의 저항변화는 열중성자량에 의존하며 조사공의 종류와는 무관하다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 춘계학술발표논문집
• /
• pp.151-154
• /
• 2002

반도체 소자의 기판 재료로 사용되고 있는 실리콘 웨이퍼는 그 정밀도가 매우 중요하다. 본 연구에서는 균일한 Dopant 농도 분포를 얻을 수 있는 중성자 변환 Doping을 이용하여 실리콘에 인(P)을 Doping하는 연구를 수행하였다. 중성자 변환 Doping, 즉 NTD(Neutron Transmutation Doping)란 원자번호 30인 실리콘 동위원소에 중성자가 조사되면 원자번호 31인 실리콘으로 변환되고, 2.6시간의 반감기를 갖고 decay 되면서 인(P)으로 변하게 되어 실리콘 웨이퍼에 n-type 전도를 갖게 하는 것을 말한다. 본 연구에서는 하나로 원자로를 이용하여 고저항(1000-2000Ωcm) FZ 실리콘 웨이퍼 에 두 개의 조사공에서 중성자 조사하여 저항의 변화를 관찰하였고, 중성자 조사시 발생하는 점결함을 분석하여 점결함이 저항 변화에 미치는 영향을 알아보았다. 중성자 조사 전 이론적 계산에 의해 HTS조사공은 5Ωcm, 20.1Ωcm 이고 IP3조사공은 5Ωcm, 26.5Ωcm, 32.5Ωcm 이었고, 중성자 조사 후 SRP로 측정한 결과 실제 저항값은 HTS-1 2.10Ωcm, HTS-2 7.21Ωcm 이었고, IP-1은 1.79Ωcm, IP-2는 6.83Ωcm, 마지막으로 IP-3는 9.23Ωcm 이었다. DLTS 측정 결과 IP조사공에서 새로운 피의 결을 발견할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제46권4호
• /
• pp.501-512
• /
• 2014

HANARO is a multipurpose research reactor located at the Korea Atomic Energy Research Institute (KAERI). Since the commencement of its operation in 1995, various neutron irradiation facilities, such as rabbit irradiation facilities, fuel test loop (FTL) facilities, capsule irradiation facilities, and neutron transmutation doping (NTD) facilities, have been developed and actively utilized for various nuclear material irradiation tests requested by users from research institutes, universities, and industries. Most irradiation tests have been related to national R&D relevant to present nuclear power reactors such as the ageing management and safety evaluation of the components. Based on the accumulated experience as well as the sophisticated requirements of users, HANARO has recently supported national R&D projects relevant to new nuclear systems including the System-integrated Modular Advanced Reactor (SMART), research reactors, and future nuclear systems. This paper documents the current state and utilization of irradiation facilities in HANARO, and summarizes ongoing research efforts to deploy advanced irradiation technology.