• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.681-688
• /
• 2020

The telegrapher's theory was used to develop a new formulation for the neutron noise equation. Telegrapher's equation is supposed to demonstrate a more realistic approximation for neutron transport phenomena, especially in comparison to the diffusion theory. The physics behind such equation implies that the signal propagation speed is finite, instead of the infinite as in the case of ordinary diffusion. This paper presents the theory and results of the development of a new method for calculation of the neutron noise using the telegrapher's equation as its basis. In order to investigate the differences and strengths of the new method against the diffusion based neutron noise, a comparison was done between the behaviors of two methods. The neutron noise based on SN transport considered as a precision measuring point. The Green's function technique was used to calculate the neutron noise based on telegrapher's and diffusion methods as well as the transport. The amplitude and phase of Green's function associated with the properties of the medium and frequency of the noise source were obtained and their behavior was compared to the results of the transport. It was observed, the differences in some cases might be considerable. The effective speed of propagation for the noise perturbations were evaluated accordingly, resulting in considerable deviations in some cases.

• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.2948-2957
• /
• 2024

High-order harmonic techniques can be used to recreate neutron flux distributions in reactor cores using the neutron diffusion equation. However, traditional source iteration and source correction iteration techniques have sluggish convergence rates and protracted calculation periods. The correctness of the implicitly restarted Arnoldi method (IRAM) in resolving the eigenvalue problems of the one-dimensional and two-dimensional neutron diffusion equations was confirmed by computing the benchmark problems SLAB_1D_1G and two-dimensional steady-state TWIGL using IRAM. By integrating Galerkin projection with Proper Orthogonal Decomposition (POD) techniques, a POD-Galerkin reduced-order model was developed and the IRAM model was used as the full-order model. For 14 macroscopic cross-section values, the TWIGL benchmark problem was perturbed within a 20% range. We extracted 100 sample points using the Latin hypercube sampling method, and 70% of the samples were used as the testing set to assess the performance of the reduced-order model The remaining 30% were utilized as the training set to develop the reduced-order model, which was employed to rebuild the TWIGL benchmark problem. The reduced-order model demonstrates good flexibility and can efficiently and accurately forecast the effective multiplication factor and neutron flux distribution in the core. The reduced-order model predicts k_eff and neutron flux distribution with a high degree of agreement compared to the full-order model. Additionally, the reduced-order model's computation time is only 10.18% of that required by the full-order model.The neutron flux distribution of the steady-state TWIGL benchmark was recreated using the reduced-order model. The obtained results indicate that the reduced-order model can accurately predict the k_eff and neutron flux distribution of the steady-state TWIGL benchmark.Overall, the proposed technique not only has the potential to accurately project neutron flux distributions in transient settings, but is also relevant for reconstructing neutron flux distributions in steady-state conditions; thus, its applicability is bound to increase in the future.

• Journal of Energy Engineering
• /
• v.17 no.4
• /
• pp.233-240
• /
• 2008

Conventionally, the second-order self-adjoint neutron transport equations have been studied using the even parity and the odd parity equations. Recently, however, the SAAF(self-adjoint angular flux) form of neutron transport equation has been introduced as a new option for the second-order self-adjoint equations. In this paper we validated the SAAF equation mathematically and clarified how it relates with the existing even and odd parity equations. We also developed a second-order SAAF differencing formula including DSA(diffusion synthetic acceleration) from the first-order difference equations. Numerical result is attached to show that the proposed methods increases accuracy with effective computational effort.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.399-413
• /
• 2021

The solution of the time-dependent neutron diffusion equation can be approximated using quasi-static methods that factorise the neutronic flux as the product of a time dependent function times a shape function that depends both on space and time. A generalization of this technique is the updated modal method. This strategy assumes that the neutron flux can be decomposed into a sum of amplitudes multiplied by some shape functions. These functions, known as modes, come from the solution of the eigenvalue problems associated with the static neutron diffusion equation that are being updated along the transient. In previous works, the time step used to update the modes is set to a fixed value and this implies the need of using small time-steps to obtain accurate results and, consequently, a high computational cost. In this work, we propose the use of an adaptive control time-step that reduces automatically the time-step when the algorithm detects large errors and increases this value when it is not necessary to use small steps. Several strategies to compute the modes updating time step are proposed and their performance is tested for different transients in benchmark reactors with rectangular and hexagonal geometry.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2172-2194
• /
• 2023

A variational nodal method (VNM) with unstructured-mesh is presented for solving steady-state and dynamic neutron diffusion equations. Orthogonal polynomials are employed for spatial discretization, and the stiffness confinement method (SCM) is implemented for temporal discretization. Coordinate transformation relations are derived to map unstructured triangular nodes to a standard node. Methods for constructing triangular prism space trial functions and identifying unique nodes are elaborated. Additionally, the partitioned matrix (PM) and generalized partitioned matrix (GPM) methods are proposed to accelerate the within-group and power iterations. Neutron diffusion problems with different fuel assembly geometries validate the method. With less than 5 pcm eigenvalue (k_eff) error and 1% relative power error, the accuracy is comparable to reference methods. In addition, a test case based on the kilowatt heat pipe reactor, KRUSTY, is created, simulated, and evaluated to illustrate the method's precision and geometrical flexibility. The Dodds problem with a step transient perturbation proves that the SCM allows for sufficiently accurate power predictions even with a large time-step of approximately 0.1 s. In addition, combining the PM and GPM results in a speedup ratio of 2-3.

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.29-42
• /
• 2017

The purpose of the present study is the presentation of the appropriate element and shape function in the solution of the neutron diffusion equation in two-dimensional (2D) geometries. To this end, the multigroup neutron diffusion equation is solved using the Galerkin finite element method in both rectangular and hexagonal reactor cores. The spatial discretization of the equation is performed using unstructured triangular and quadrilateral finite elements. Calculations are performed using both linear and quadratic approximations of shape function in the Galerkin finite element method, based on which results are compared. Using the power iteration method, the neutron flux distributions with the corresponding eigenvalue are obtained. The results are then validated against the valid results for IAEA-2D and BIBLIS-2D benchmark problems. To investigate the dependency of the results to the type and number of the elements, and shape function order, a sensitivity analysis of the calculations to the mentioned parameters is performed. It is shown that the triangular elements and second order of the shape function in each element give the best results in comparison to the other states.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1181-1194
• /
• 2019

A new moving-mesh Finite Volume Method (FVM) for the efficient solution of the two-dimensional neutron diffusion equation is introduced. Many other moving-mesh methods developed to solve the neutron diffusion problems use a relatively large number of sophisticated mathematical equations, and so suffer from a significant complexity of mathematical calculations. In this study, the proposed method is formulated based on simple mathematical algebraic equations that enable an efficient mesh movement and CV deformation for using in practical nuclear reactor applications. Accordingly, a computational framework relying on a new moving-mesh FVM is introduced to efficiently distribute the meshes and deform the CVs in regions with high gradient variations of reactor power. These regions of interest are very important in the neutronic assessment of the nuclear reactors and accordingly, a higher accuracy of the power densities is required to be obtained. The accuracy, execution time and finally visual comparison of the proposed method comprehensively investigated and discussed for three different benchmark problems. The results all indicated a higher accuracy of the proposed method in comparison with the conventional fixed-mesh FVM.

• 한국초전도학회:학술대회논문집
• /
• 2009.07a
• /
• pp.52-52
• /
• 2009

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1391-1402
• /
• 2021

The aim of this work is to prepare a neutron noise calculator based on the second order of average current nodal expansion method (ACNEM). Generally, nodal methods have the ability to fulfill the neutronic analysis with adequate precision using coarse meshes as large as a fuel assembly size. But, for the zeroth order of ACNEM, the accuracy of neutronic simulations may not be sufficient when coarse meshes are employed in the reactor core modeling. In this work, the capability of second order ACNEM is extended for solving the neutron diffusion equation in the frequency domain using coarse meshes. For this purpose, two problems are modeled and checked including a slab reactor and 2D BIBLIS PWR. For validating of results, a semi-analytical solution is utilized for 1D test case, and for 2D problem, the results of both forward and adjoint neutron noise calculations are exploited. Numerical results indicate that by increasing the order of method, the errors of frequency dependent coarse mesh solutions are considerably decreased in comparison to the reference. Accordingly, the accuracy of second order ACNEM can be acceptable for the neutron noise calculations by using coarse meshes in the nuclear reactor core.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.203-209
• /
• 2018

To correctly predict the neutron behavior based on diffusion calculations, it is necessary to adopt well-specified boundary conditions using suitable diffusion approximations to transport boundary conditions. Boundary conditions such as the zero net-current, the Marshak, the Mark, the zero scalar flux, and the Albedo condition have been used extensively in diffusion theory to approximate the reflective and vacuum conditions in transport theory. In this paper, we derive and analyze these conditions to prove their mathematical validity and to understand their physical implications, as well as their relationships with one another. To show the validity of these diffusion boundary conditions, we solve a sample problem. The results show that solutions of the diffusion equation with these well-formulated boundary conditions are very close to the solution of the transport equation with transport boundary conditions.