• Korean Institute of Interior Design Journal
• /
• no.23
• /
• pp.109-115
• /
• 2000

The purpose of this study is to examine the interior textile color changes and trends by analyzing the characteristics of interior color hues and tones. Heimtextil in the interior field was selected for color trend analysis from 1996 to 2000. The conclusions of this study are as follows: First, In terms of hue, warm colors like Y, YR, and R were most prominent in all four years. Some new colors, however, emerged with higher frequency. The frequency of GY and B increased in 96/97, GY, BG and PB in 97/98 PB and B in 98/99, and B and PB in 99/2000. Especially between 96/2000, the frequency of PB and B has been increased, although the frequency of GY has been decreased. Over the four years, P, RP, and Neutral showed medium frequency, and G and BG showed low frequency. Gold appeared as an accent color in two years while silver appeared in one year. In summary, warm colors like Y, YR, and R were most prominent in interior color. Second, In terms of tone, p, b, v, and sf were most prominent over the four years. Although 에 and ltg appeared with high frequency n general, a wide variation was presented. The tones such as p, dp, and v appeared with high frequency in the three years of 96/97, 97/98 b and sf in 97/98 ; lt, dk and sf in 98/99. On the other hand, a new trend emerged in 99/2000. In this year, ltg, sf, s, d and dkg appeared with high frequency unlike the other three years. In other words, soft or light tones, such as pale, soft, light, grayish, and deep, and strong tones, such as vivid and bright, appeared with high frequency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.529-535
• /
• 2007

The nutritive values of leaves of Citrus grandis, Citrus aurantium, Citrus oranges, Citrus limon, and Citrus deliciosa were evaluated by chemical composition and in vitro gas production techniques. There were significant (p<0.001) differences among citrus species in terms of chemical composition. Crude protein (CP) contents ranged from 123.0 to 148.3 g/kg DM. Neutral detergent fibre (NDF) and acid detergent fibre (ADF) contents were varied with species in the range 219.4-355.4 and 215.0-278.8 g/kg DM respectively. Condensed tannin (CT) contents were ranged from 5.9 to 10.2 g/kg DM. The PEG addition significantly (p<0.001) increased the gas production and some estimated parameters of citrus tree leaves. However, species showed variable responses to polyethylene glycol (PEG) treatment. There were also significant (p<0.001) differences among species in terms of gas production and estimated parameters. The OMD and ME contents of citrus leaves without PEG supplementation were ranged from 66.5 to 73.3% and 9.8 to 10.9 MJ/kg DM respectively. The improvement in gas production, organic matter digestibility (OMD) and metabolizable energy (ME) with PEG emphasized the negative effect of tannins on digestibility. The increase (%) in the estimated OMD and ME contents ranged from 5.5 to 9.8% and 5.7 to 10.2% respectively. All citrus tree leaves studied in this experiment have potential nutritive values indicated by high crude protein content, OMD, ME and low fiber values.

• Korean Journal of Agricultural Science
• /
• v.46 no.1
• /
• pp.125-135
• /
• 2019

Late-maturing Dark Horse, and early-maturing High Speed oat varieties were seeded on March 3, 2016 and harvested on three periods: May 31, June 10, and June 20 coded as early, mid, and late-harvest, respectively. Dried and ground samples were subjected to chemical analysis to determine nutritional values such as crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF), ether extract (EE), organic matter (OM), and total digestible nutrient (TDN). Effective degradability (ED) of nutrients and fermentation characteristics including volatile fatty acid (VFA) composition, pH, gas production, and ammonia-N concentration were evaluated through an in vitro digestion method. Varieties of oat hays showed significant difference in terms of nutritional value, ED, and fermentation characteristics. Dark Horse showed higher CP and OM, and lower EE contents than High Speed. Dark Horse also showed higher EDDM (dry matter), NDF, ADF, and OM than High Speed, and although High Speed showed higher pH and ammonia-N, it had lower gas and total VFA production than Dark Horse. However, in terms of harvest period, significant difference was only observed in Dark Horse where early-harvest increased the CP, and late-harvest increased the NDF and OM contents. In addition, early-harvest of Dark Horse increased the EDDM and EDNDF of the forage. Therefore, early-harvest of late-maturing Dark Horse would give better nutrient efficiency than High Speed. Allowing Dark Horse to advance in maturity would decrease its nutrient productivity and efficiency.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.42-49
• /
• 2018

Pilot Aptitude Research Equipment (PARE) is a simulator developed to measure or research pilot aptitude and train for student pilots. Design of an ergonomic PARE operation console is required to operate the equipment effectively. This study carried out five steps : (S1) operator questionnaire survey, (S2) anthropometric design formula development, (S3) usability evaluation, (S4) improvement design, and (S5) validation considering both Physical User Interface (PUI) and Graphic User Interface (GUI) of PARE operation console. The operator questionnaire surveyed needs for each PUI and GUI part of the console from two PARE actual operators. In terms of PUI, the anthropometric design formula was developed by using design variables, body dimensions, target population characteristics, and reference posture related to the PARE console. In terms of GUI, the usability evaluation was conducted by three usability testing experts with a 7-point scale (1 : very low, 4 : neutral, 7 : very high) on GUI of the PARE operation console by seven usability criteria. The improved PARE operation console was designed to reflect the optimal values of design variables calculated from design formula, the results from usability testing, and the operator's needs. The improvement effect was observed by 20 people who had experience with the PARE operation console. As a result of the validation, monitor visibility and cockpit visibility for the improved PUI design and visibility and efficiency for the improved GUI design were significantly increased by more than 90% respectively. The improved design of the PARE operation console in this study can contribute to enhance operation performance of the PARE.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.65-70
• /
• 2024

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN (Wireless Smart Utility Network) Alliance proposed a Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e Receiver Initiated Transmission(RIT) Mode Media Access Control (MAC) in terms of throughput and latency, and looks at considerations for efficient operation. RIT mode shows that as the check interval becomes longer, delay time and throughput decrease. It was shown that as the traffic load increases, if the RIT check interval is shortened, the delay time can be shortened and throughput can be increased. RIT mode has the advantage of low power consumption and has neutral characteristics between IEEE802.15.4 and CSL mode in terms of delay time and throughput.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.6
• /
• pp.419-427
• /
• 2019

Several multilevel converter topologies have been proposed and compared. The three-level (3L) neutral-point-clamped (NPC) topology is promising and widely accepted. However, this topology suffers from uneven loss distribution among switches due to its fixed switching strategy. The 3L active NPC (ANPC) topology, which exhibits improved loss distribution profile, was proposed to address this disadvantage. The 3L T-NPC topology, a hybrid configuration of 2L and 3L NPC topologies, was introduced to address not only the loss distribution problem but also the reduction in the number of switches. In the present research, the application of these three topologies in PMSG-based medium-voltage wind turbines was investigated. The power devices considered were 10 kV IGCTs. Performance was evaluated in terms of a power loss of 10 kV IGCT for each NPC topology, which is a crucial indicator of thermal behavior, reliability, cost, and lifetime of any converter. The comparison was performed using ABB make 10 kV IGCT 5SHY17L9000 and the simulation tool PLECS.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.167-171
• /
• 2004

The electroless deposition of copper on the hydrogen-terminated Si(111) surface was investigated by means of attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, scanning tunneling microscopy (STM), and energy-dispersive spectroscopy (EDS). The hydrogen-terminated Si(111) surface prepared was stable under air atmosphere for a day or more. It was found from ATR-FTIR that two bands centered at 2000 and 2260 $cm^{-1}$ appeared after the H-Si(111) surface was immersed in 40% $NH_4F$ solution containing 10 mM $Cu^{2+}$. On the other hand, STM image included the copper islands with a height of 5 nm and a diameter of 10-20 nm. The EDS data displayed the presence of copper, silicon and oxygen species. The results were rationalized in terms of the redox reaction of surface Si atoms and $Cu^{2+}$ ions in solutions, which are changed into $Si(OH)_x(F)_y$ containing $SiF_6^{2-}$ ions and neutral copper islands.

• Journal of the Korea Concrete Institute
• /
• v.12 no.2
• /
• pp.3-11
• /
• 2000

There is a possibility of poor-state concrete filling condition due to segregation and interlocking of aggregate and paste when a high performance concrete is used at reinforced concrete structure without compaction. This study was conducted to evaluate the flexural behavior of high performance concrete beams with design parameters such as c, t and different concrete filling conditions. Different concrete filling conditions were intentionally made such that the first type specimen was soundly cast to obtain the perfect concrete filling condition. Second type was cast in such a way that up to the longitudinal tensile reinforcement from the top, good concrete was filled while poor concrete was poured for the bottom part to simulate the poor strength, workability and unsatisfactory compaction. Third type was cast in such a was that up to the neutral axis of the beam section from the top, good concrete was filled while so did for the bottom part as the second type. The test results were analyzed in terms of load-displacement response, failure pattern, crack width and crack spacing. The test results indicate that have no effect of concrete filling conditions on the yielding strength of structures. But, have a grate influence on the stiffness and ductility of structures.

• Journal of Families and Better Life
• /
• v.23 no.5 s.77
• /
• pp.181-190
• /
• 2005

The purpose of this study was to investigate the characteristics of leisure behavior of the five-day workweek company employees for developing leisure facilities in residential environment. The questionnaire survey was used. The subjects of questionnaire survey were 247 staffs of 4 banks. The questionnaire consisted of leisure time, the cost of leisure, consciousness of leisure, actual condition and need of leisure activities and spaces, leisure satisfaction and limitation on leisure. Frequency, percentage, and mean, correlation, $x^2-test$, and factor analysis were used for data analysis. The major results were as follows. 1) Leisure is necessary to strengthen the unity of family and cultivate the sentiment. 2) The degree of satisfaction of leisure facilities was lower than neutral. The satisfaction of leisure facilities related with cost, time of leisure, information of leisure facilities and program, and leisure environment. 3) Present leisure behavioral characteristics were restrictive and passive. However, the subjects showed hopes to increase their leisure activities and to engage in diverse forms of leisure in the future. Also, they showed an increased desired ratios in participating in each leisure activities. 4) In terms of location, they needed leisure facilities which was closer to their house.

• Structural Engineering and Mechanics
• /
• v.68 no.2
• /
• pp.171-182
• /
• 2018

For the first time, nonlocal damped vibration and buckling analyses of arbitrary tapered bidirectional functionally graded solid circular nano-plate (BDFGSCNP) are presented by employing modified spectral Ritz method. The energy method based on Love-Kirchhoff plate theory assumptions is applied to derive neutral equilibrium equation. The Eringen's nonlocal continuum theory is taken into account to capture small-scale effects. The characteristic equations and corresponding first mode shapes are calculated by using a novel modified basis in spectral Ritz method. The modified basis is in terms of orthogonal shifted Chebyshev polynomials of the first kind to avoid employing adhesive functions in the spectral Ritz method. The fast convergence and compatibility with various conditions are advantages of the modified spectral Ritz method. A more accurate multivariable function is used to model two-directional variations of elasticity modulus and mass density. The effects of nanoscale, in-plane pre-load, distributed dashpot, arbitrary tapering, pinned and clamped boundary conditions on natural frequencies and buckling loads are investigated. Observing an excellent agreement between results of current work and outcomes of previously published works in literature, indicates the results' accuracy in current work.