• Journal of Korean Vacuum Science & Technology
• /
• v.7 no.1
• /
• pp.23-26
• /
• 2003

In this study, a neutral beam was formed using a low angle forward reflection of the ion beam and its degree of neutralization at different reflection angles was investigated. When the ion beam was reflected by a reflector at the angles lower than 15$^{\circ}$, most of the ions reflected were neutralized and the lower reflector angle showed the higher degree of neutralization. Photoresist(PR) and SiO$_2$ etchings were carried out with the neutralized oxygen and fluorine radical fluxes, respectively, and highly anisotropic etch profiles could be obtained suggesting the formation of highly directional neutral flux.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.387-394
• /
• 2006

In this study, the effect of using a neutral beam formed by low-angle forward reflection of a reactive ion beam on aspect-ratio-dependent etching (ARDE) has been investigated. When a SF6 Inductively Coupled Plasma and $SF_6$ ion beam etching are used to etch poly-Si, ARDE is observed and the etching of poly-Si on $SiO_2$ shows a higher ARDE effect than the etching of poly-Si on Si. However, by using neutral beam etching with neutral beam directionality higher than 70 %, ARDE during poly-Si etching by $SF_6$ can be effectively removed, regardless of the sample conditions. The mechanism for the removal of ARDE via a directional neutral beam has been demonstrated through a computer simulation of different nanoscale features by using the two-dimensional XOOPIC code and the TRIM code.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.634-643
• /
• 2011

The neutral section was installed in order to prevent conflict with different phase angle source in electric railway catenary system. The speed of electric train reduced due to coasting operation by notch off when it passed the neutral section. And, the catenary wire was damaged and the accident might be happened because of the arc generation when the electric train passed the neutral section with notch off condition. The inrush current of main transformer installed tiling train is analyzed during the operation of MCB(main circuit break) passing through the neutral section. The instantaneous waveform of load current were analyzed in case of powering and regenerative braking. Inrush current waveform with run of AC railway train showed that inrush current waveform and harmonics, the inrush current generated from main transformer in train has bad effects on power quality problem. In order to reduce these inrush currents, the MCB is connected when the phase angle of voltage is 90 degree. This paper is to measure inrush current and harmonics in main transformer of high speed train in neutral section of electric railway. This measurement report is used to control minimum inrush current in algorithm and power phase angle.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.4
• /
• pp.139-145
• /
• 1996

This study was carried out to investigate the scapular rhythm of normal persons. 16 persons was no disease, injury and after-effect in period for July 1, 1996 to July 14, 1996. The statistical measures were performed by SPSS/PC t-test for classification. The result of this study were as follow : 1. There was a significant difference between the body median line and scapular superior angle from the mean distance in 83.4 mm of male and 86.0 mm of female to shoulder neutral position(p<0.05). 2. The mean distance of body median line between scapular inferior angle was 97.9 mm of male and 92.0 mm of female to shoulder neutral position. 3. There was a significant difference between the body median line and scapular inferior angle from the mean distance with male and female to shoulder abduction $90^{\circ}$ position(p<0.05). 4. The mean angle of body median line between scapular angle was $6.4^{\circ}$ of male and $4.4^{\circ}$ of female with shoulder neutral position. 5. The mean ratio of scapular rhythm was 5.6 : 1 in shoulder abduction of $90^{\circ}$ and 5.1 : 1 in shoulder abduction of 180.

• The Journal of Korean Physical Therapy
• /
• v.35 no.5
• /
• pp.151-155
• /
• 2023

Purpose: This study examined the effect of the degree of neck flexion on the muscle activity of the upper trapezius and sternocleidomastoid muscles in the sitting position. Methods: Twenty-five healthy young adults participated in this study. The study was designed to compare the muscle activity of the upper trapezius and sternocleidomastoid muscles according to the neck flexion angle under the three conditions (neutral position, 15° neck flexion, and 45° neck flexion) in the sitting position. During the neck position of three conditions in sitting, the electromyography (EMG) data (% maximum voluntary isometric contraction) of the muscles were recorded using a wireless surface EMG system. Results: The muscle activity of the upper trapezius muscle and the sternocleidomastoid muscles showed a significant difference according to the three-neck position conditions (p<0.05), and in the post-hoc test results, both muscles showed significant differences between the neutral position and 15° flexion, the neutral position and 45° flexion, and the 15° flexion and 45° flexion, respectively. Conclusion: The load on the muscles around the neck and shoulders increased as the neck flexion angle increased. This suggests that performing various daily activities and tasks with the neck as neutral as possible can prevent muscle fatigue or musculoskeletal disorders.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.56-56
• /
• 2003

플라즈마 식각에서 물리적 손상과 전기적 손상은 차세대 Nanoscale 소자와 Deep - Submicron 반도체공정에서 해결되어야 할 가장 큰 문제 중 하나이다. 이 중 전기적인 손상을 줄이기 위한 몇 가지 무손상 공정이 제시되고 있으며, 그러한 기술 중의 하나가 이온빔의 Low Angle Forward Reflection을 이용한 식각방법이다. Low Angle Forward Reflection방법은 이온소오스로부터 발생시킨 이온을 Low Angle 에서 Reflection-시켜 이온빔을 중성화되도록 하는 방법으로, 이전 연구를 통해 Reflection시 입사각이 5도일 경우 대부분의 이온들이 중성화되는 결과를 얻었다. 또한, 실험에 사용된 $SF_6,{\;}NF_3,{\;}CF_4$와 같은 모든 가스종에서 유사한 값의 중성화 정도를 관찰할 수 있었으며, 이러한 가스를 이용하여 $Si0_2$ 식각시 Vertical한 Profile 결과를 얻었다. 본 연구에서는 기존 Grid 장치에서 이온소오스 부분에 Low Angle Forward Reflected Neutral Beam을 위한 판형 Reflector를 부착하였으며, 이에 따라 중성빔의 Flux가 크게 향상되며 Beam의 직진성을 향상시킬 수 있었다. 또한, F계열 가스를 이용한 실험을 통해 $Si0_2$ 식각율과 식각특성 면에서 향상된 실험결과를 얻을 수 있었다.

• The Journal of Korean Physical Therapy
• /
• v.33 no.1
• /
• pp.40-46
• /
• 2021

Purpose: This study compared the muscle activity of the lower limb according to the three types of fixed angles of the ankle joint during a lunge exercise. Methods: Twenty healthy subjects performed the lunge motion in a trial including the three types of fixed angle. The lunge motion with a neutral, 20° dorsiflexion, and 20° plantarflexion of the ankle joint were randomized and measured repeatedly. The muscle activity of the rectus femoris (RF), vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), and semitendinosus (ST) was measured by surface electromyography. Results: In the change in ankle joint angle, the RF, VL, BF, and ST muscle activity showed significant differences (p<0.05). In the 20° dorsiflexion position, the muscle activity of VL, BF, and ST showed a significant decrease compared to that in the neutral position (p<0.017). The muscle activity of RF and VL in the neutral position was greater than that in the 20° plantarflexion position (p<0.017). Only the muscle activity of the BF in the 20° plantarflexion position was significantly greater than the 20° dorsiflexion position (p<0.017). Conclusion: These results revealed a difference in the muscle activity of lower extremities in the proximal region according to the angle of the ankle joint during the lunge.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1597-1603
• /
• 1995

A prediction model on forward slip has been developed for presetting rolling speed of each finish mill stand in the continuous hot strip roduction. Those factors such as neutral point, friction coefficient, volume fractions undergoing width spread, shape of deformation zone at each side of entry and delivery of the rolls were taken into account. To reduce the speed unbalance between adjacent stands a refining method of adjusting friction coefficient has also been developed. On-line application of the model showed a good agreement in rolling speeds between the predictions and the actual measurements, and gave an outstanding improvement in the travelling stability of strip passing through the finishing mill train.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.4
• /
• pp.268-278
• /
• 1990

Hydrodynamic stability equations are formulated for natural convection flows adjacent to a heated or cooled, inclined, isothermal surface in pure water at $4^{\circ}C$, where the density variation with temperature becomes nonlinear. The resulting stability equations, when reduced to ordinary differential equations by a similarity transformation, constitute a two-point boundary-value problem, which was solved numerically. It is found from the obtained stability results that the neutral stability curves are systematically shifted to have lower critical Grashof numbers, as the inclination angle of upward-facing plate increases. Also, the nose of the neutral stability curve becomes blunter as the angle increases. It implies that the greater the inclination of the upward-facing plate, the more susceptible of the flow to instability for the wide range of disturbance wave number and frequency.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.1
• /
• pp.43-49
• /
• 2017

PURPOSE: This study investigated the relationship among hip adduction angle, tibial rotation, and ITB length during an Ober test to determine the most appropriate position for performing the test. METHODS: The study included thirty-nine asymptomatic participants (23 males, 16 females). Their hip adduction angles were measured using the Ober test during three tibial rotation conditions (internal tibial rotation, external rotation, and neutral position). ITB length was calculated by measuring the position of the patella to lateral femoral condyle using ultrasonography (patella-condyle distance; PCD). RESULTS: The relationship among hip adduction angle, tibial rotation, and ITB length was analyzed under the three conditions using the Pearson correlation. The hip adduction angle of the internal tibial rotation, the external rotation, and the neutral position were significantly related to ITB length. Moreover, the hip adduction angle measured during the internal tibial rotation had the highest correlation with ITB length among the three conditions (r=.58, p<.001). CONCLUSION: Internal tibial rotation caused by the Ober test led to increased iliotibial band (ITB) tension and a decreased adduction angle. These findings support that tibial rotation influences the flexibility of ITB. Therefore, therapists should consider the position of the internal tibial rotation when taking measurements using an Ober test.