• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.2
• /
• pp.102-110
• /
• 2015

The main source of noise in computed tomography (CT) images is a quantum noise, which results from statistical fluctuations of X-ray quanta reaching the detector. This paper proposes a neural network (NN) based hybrid filter for removing quantum noise. The proposed filter consists of bilateral filters (BFs), a single or multiple neural edge enhancer(s) (NEE), and a neural filter (NF) to combine them. The BFs take into account the difference in value from the neighbors, to preserve edges while smoothing. The NEE is used to clearly enhance the desired edges from noisy images. The NF acts like a fusion operator, and attempts to construct an enhanced output image. Several measurements are used to evaluate the image quality, like the root mean square error (RMSE), the improvement in signal to noise ratio (ISNR), the standard deviation ratio (MSR), and the contrast to noise ratio (CNR). Also, the modulation transfer function (MTF) is used as a means of determining how well the edge structure is preserved. In terms of all those measurements and means, the proposed filter shows better performance than the guided filter, and the nonlocal means (NLM) filter. In addition, there is no severe restriction to select the number of inputs for the fusion operator differently from the neuro-fuzzy system. Therefore, without concerning too much about the filter selection for fusion, one could apply the proposed hybrid filter to various images with different modalities, once the corresponding noise characteristics are explored.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.6
• /
• pp.922-934
• /
• 2015

In this paper, The classification between precipitation echo(PRE) and non-precipitation echo(N-PRE) (including ground echo and clear echo) is carried out from weather radar data using neuro-fuzzy algorithm. In order to classify between PRE and N-PRE, Input variables are built up through characteristic analysis of radar data. First, the event classifier as the first classification step is designed to classify precipitation event and non-precipitation event using input variables of RBFNNs such as DZ, DZ of Frequency(DZ_FR), SDZ, SDZ of Frequency(SDZ_FR), VGZ, VGZ of Frequency(VGZ_FR). After the event classification, in the precipitation event including non-precipitation echo, the non-precipitation echo is completely removed by the echo classifier of the second classifier step that is built as Type-2 FCM based RBFNNs. Also, parameters of classification system are acquired for effective performance using PSO(Particle Swarm Optimization). The performance results of the proposed echo classifier are compared with CZ. In the sequel, the proposed model architectures which use event classifier as well as the echo classifier of Interval Type-2 FCM based RBFNN show the superiority of output performance when compared with the conventional echo classifier based on RBFNN.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.132-136
• /
• 2007

최근 지구온난화로 인한 이상기후의 영향으로 강우일수는 줄고 있으나 강수량은 예년과 비슷한 수준을 보이고 있다. 이로 인해 갈수기의 용수부족 현상은 더욱 심해지고. 장마철의 홍수피해와 게릴라성 집중호우로 인한 피해가 커지는 등 해가 갈수록 홍수 예경보의 중요성은 더욱 높아지고 있다. 그럼에도 불구하고 현재 홍수 예경보 체계는 몇 가지 문제를 가지고 있다. 기존 예경보 체계의 경우 한 번의 예측을 수행하기 위해 수반되는 전처리과정과 주계산과정을 거치는 동안 각 과정에서 발생한 오차들이 반복, 누적되어 최종 결과물(예측된 유출량) 속에 모두 포함된다. 또한 기존 체계에서는 유출모형을 적용하기 위해서 토양형. 피복상태 등에 관련된 매개변수들이 필요한데. 이러한 매개변수의 결정에 어려움이 있고. 불확실성을 갖고 있다. 본 연구에서는 불확실성을 적극적으로 인정하고 수학적으로 해석하려는 fuzzy 이론을 신경망 이론에 도입하여 홍수 예경보 시스템의 운영과정에서 발생하는 불확실성의 문제를 해결하고자 하였다. 본 연구에서 사용한 ANFIS(Adaptive Neuro-Fuzzy Inference System)은 data driven model(자료에 기반을 둔 모형)의 하나로 다음과 같은 장점을 가진다. 우선 data driven model은 유역의 물리적, 지형적 특성을 고려하지 않고(매개변수설정에서 발생하는 문제 해결 가능), 입력자료와 출력자료만을 고려하여 구축되는 모형이므로, 유역의 물리적 자료나 지형 자료와 같은 방대한 양의 자료 수집이 필요 없고, 일단 모형이 구축되면 자료의 입력만으로도 신뢰성 높은 결과를 단시간 내에 효율적으로 획득할 수 있다. 그리고 유역 내의 상황이 변화하더라도, 이들의 영향을 고려하여 쉽게 모형을 갱신할 수 있다. 마지막으로 모형의 구축 과정이 물리적 모형에 비해 비교적 간편하다는 장점이 있다. 본 연구에서는 ANFIS를 통해 탄천유역의 강수량 자료와 대곡교의 수위자료를 입력자료로 사용하여 대곡교의 수위를 예측하였다. 입력 자료는 시간차 계열의 강우량과 수위 자료를 사용하였으며 모형을 통하여 t+1, t+2, t+3 시간 후의 수위를 예측하였다.

• Steel and Composite Structures
• /
• v.48 no.2
• /
• pp.179-190
• /
• 2023

Many recent attempts have sought accurate prediction of pile pullout resistance (P_ul) using classical machine learning models. This study offers an improved methodology for this objective. Adaptive neuro-fuzzy inference system (ANFIS), as a popular predictor, is trained by a capable metaheuristic strategy, namely equilibrium optimizer (EO) to predict the P_ul. The used data is collected from laboratory investigations in previous literature. First, two optimal configurations of EO-ANFIS are selected after sensitivity analysis. They are next evaluated and compared with classical ANFIS and two neural-based models using well-accepted accuracy indicators. The results of all five models were in good agreement with laboratory P_uls (all correlations > 0.99). However, it was shown that both EO-ANFISs not only outperform neural benchmarks but also enjoy a higher accuracy compared to the classical version. Therefore, utilizing the EO is recommended for optimizing this predictive tool. Furthermore, a comparison between the selected EO-ANFISs, where one employs a larger population, revealed that the model with the population size of 75 is more efficient than 300. In this relation, root mean square error and the optimization time for the EO-ANFIS (75) were 19.6272 and 1715.8 seconds, respectively, while these values were 23.4038 and 9298.7 seconds for EO-ANFIS (300).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5B
• /
• pp.405-414
• /
• 2011

The adaptive network-based fuzzy inference system (ANFIS) which had a success for time series prediction and system control was applied for modeling the hourly runoff in the Gapcheon watershed. The ANFIS used the antecedent rainfall and runoff as the input. The ANFIS was trained by varying the various simulation factors such as mean areal rainfall estimation, the number of input variables, the type of membership function and the number of membership function. The root mean square error (RMSE), mean peak runoff error (PE), and mean peak time error (TE) were used for validating the ANFIS simulation. The ANFIS predicted runoff was in good agreement with the measured runoff and the applicability of ANFIS for modelling the hourly runoff appeared to be good. The forecasting ability of ANFIS up to the maximum 8 lead hour was investigated by applying the different input structure to ANFIS model. The accuracy of ANFIS for predicting the hourly runoff was reduced as the forecasting lead hours increased. The long-term predictability of ANFIS for forecasting the hourly runoff at longer lead hours appeared to be limited. The ANFIS might be useful for modeling the hourly runoff and has an advantage over the physically based models because the model construction of ANFIS based on only input and output data is relatively simple.

• Computers and Concrete
• /
• v.16 no.3
• /
• pp.399-414
• /
• 2015

Nowadays, fiber reinforced polymer (FRP) composites are widely used for rehabilitation, repair and strengthening of reinforced concrete (RC) structures. Also, recent advances in concrete technology have led to the production of high strength concrete, HSC. Such concrete due to its very high compression strength is less ductile; so in seismic areas, ductility is an important factor in design of HSC members (especially FRP strengthened members) under flexure. In this study, the Adaptive Neuro-Fuzzy Inference System (ANFIS) and multiple regression analysis are used to predict the curvature ductility factor of FRP strengthened reinforced HSC (RHSC) beams. Also, the effects of concrete strength, steel reinforcement ratio and externally reinforcement (FRP) stiffness on the complete moment-curvature behavior and the curvature ductility factor of the FRP strengthened RHSC beams are evaluated using the analytical approach. Results indicate that the predictions of ANFIS and multiple regression models for the curvature ductility factor are accurate to within -0.22% and 1.87% error for practical applications respectively. Finally, the effects of height to wide ratio (h/b) of the cross section on the proposed models are investigated.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.405-408
• /
• 2008

Up to now, a lot of houses, roads and other urban facilities have been damaged by natural disasters such as flash floods and landslides. It is reported that the size and frequency of disasters are growing greatly due to global warming. In order to mitigate such disaster, flood forecasting and alerting systems have been developed for the Han river, Geum river, Nak-dong river and Young-san river. These systems, however, do not help small municipal departments cope with the threat of flood. In this study, a real-time urban flood forecasting service (U-FFS) is developed for ubiquitous computing city which includes small river basins. A test bed is deployed at Tan-cheon in Gyeonggido to verify U-FFS. It is found that U-FFS can forecast the water level of outlet of river basin and provide real-time data through internet during heavy rain. Furthermore, it is expected that U-FFS presented in this study can be applied to ubiquitous computing city (u-City) and/or other cities which have suffered from flood damage for a long time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.606-609
• /
• 2015

본 연구에서는 support vector regression (SVR) 및 매개변수 최적화 알고리즘을 이용한 하천수위 예측모델을 구축하고 이를 실제 유역에 적용하여 모델 효율성을 평가하였다. 여기서, SVR은 하천수위를 예측하기 위한 예측모델로서 채택되었으며, 커널함수 (Kernel function)로서는 radial basis function (RBF)을 선택하였다. 최적화 알고리즘은 SVR의 최적 매개변수 (C?, cost parameter or regularization parameter; ${\gamma}$, RBF parameter; ${\epsilon}$, insensitive loss function parameter)를 탐색하기 위하여 적용되었다. 매개변수 최적화 알고리즘으로는 grid search (GS), genetic algorithm (GA), particle swarm optimization (PSO), artificial bee colony (ABC) 알고리즘을 채택하였으며, 비교분석을 통해 최적화 알고리즘의 적용성을 평가하였다. 또한 SVR과 최적화 알고리즘을 결합한 모델 (SVR-GS, SVR-GA, SVR-PSO, SVR-ABC)은 기존에 수자원 분야에서 널리 적용되어온 신경망(Artificial neural network, ANN) 및 뉴로퍼지 (Adaptive neuro-fuzzy inference system, ANFIS) 모델과 비교하였다. 그 결과, 모델 효율성 측면에서 SVR-GS, SVR-GA, SVR-PSO 및 SVR-ABC는 ANN보다 우수한 결과를 나타내었으며, ANFIS와는 비슷한 결과를 나타내었다. 또한 SVR-GA, SVR-PSO 및 SVR-ABC는 SVR-GS보다 상대적으로 우수한 결과를 나타내었으며, 모델 효율성 측면에서 SVR-PSO 및 SVR-ABC는 가장 우수한 모델 성능을 나타내었다. 따라서 본 연구에서 적용한 매개변수 최적화 알고리즘은 SVR의 매개변수를 최적화하는데 효과적임을 확인할 수 있었다. SVR과 최적화 알고리즘을 이용한 하천수위 예측모델은 기존의 ANN 및 ANFIS 모델과 더불어 하천수위 예측을 위한 효과적인 도구로 사용될 수 있을 것으로 판단된다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.180-183
• /
• 2013

근래의 프로세서는 하나의 다이 위에 여러 개의 코어를 배치한 멀티코어 형태를 띠고 있다. 최근에는 프로세서의 에너지 소비량을 줄이기 위해 비대칭 멀티코어를 활용하여 동일한 성능을 유지하며 소비전력을 낮추는 방법에 대한 연구가 활발히 진행되고 있다. 비대칭 멀티코어의 장점을 최대한 활용하기 위해서는 대칭형 멀티코어와는 달리 실행해야 할 프로세스와 상이한 코어간의 작동 특성을 고려해야 한다. 본 논문에서는 전력 소비 효율 향상을 위해 프로세스 스케줄링 알고리즘에 하이브리드 인공지능 기술인 Adaptive Neuro Fuzzy Inference System (ANFIS)를 적용하여 각 프로세스에 적합한 코어를 찾아 할당하는 방법을 제안한다. 시뮬레이션 결과 제안하는 프로세스 스케줄러는 리눅스의 CFS 대비 평균 35.4% 낮은 Energy Delay Product (EDP)를 보였으며 이를 통해 하이브리드 인공지능을 적용한 프로세스 스케줄링 알고리즘의 유효성을 입증하였다.

• Geomechanics and Engineering
• /
• v.27 no.5
• /
• pp.511-525
• /
• 2021

In the design of underground excavation, the shear strength (SS) is a key characteristic. It describes the way the rock material resists the shear stress-induced deformations. In general, the measurement of the parameters related to rock shear strength is done through laboratory experiments, which are costly, damaging, and time-consuming. Add to this the difficulty of preparing core samples of acceptable quality, particularly in case of highly weathered and fractured rock. This study applies rock index test to the indirect measurement of the SS parameters of shale. For this aim, two efficient artificial intelligence methods, namely (1) adaptive neuro-fuzzy inference system (ANFIS) implemented by subtractive clustering method (SCM) and (2) support vector regression (SVR) optimized by Harmony Search (HS) algorithm, are proposed. Note that, it is the first work that predicts the SS parameters of shale through ANFIS-SCM and SVR-HS hybrid models. In modeling processes of ANFIS-SCM and SVR-HS, the results obtained from the rock index tests were set as inputs, while the SS parameters were set as outputs. By reviewing the obtained results, it was found that both ANFIS-SCM and SVR-HS models can provide acceptable predictions for interlocking and friction angle parameters, however, ANFIS-SCM showed a better generalization capability.