• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.104-121
• /
• 2016

Royal tombs in Neungsan-ri had been studied several times during the Japanese Colonial era. But, conceiving the general complexion of them is difficult for lack of data and analysis of previous studies are still insufficient. Thus, necessity of new approach and understanding in Royal tombs in Neungsan-ri are emphasized by the reviewing existing studies and conservation history. The Serial numbers of the Royal tombs in Neungsan-ri has been registered arbitrarily without clear guidelines from Japanese Colonial era until present time. It means previous studies were devoid of consideration for serial number changes. And, research has shown that Royal tombs in Neungsan-ri counts at least twenty, taking No.8 tomb of recent study into consideration. Moreover, in case of eastern tombs it needs changes in the existing perception that Royal tombs in Neungsan-ri consist of only six-tombs because there was no difference between eastern tombs and central sixtombs considering the burial chamber and lacquered wooden(koyamaki) Coffin. Ultimately, current state of Royal tombs in Neungsan-ri doesn't have authenticity because they had been found and regulated in the Japanese Colonial era. Consequently, it is required to overall study into entrance to burial chamber and covered burial stone marker and exaggerated mounds, ignored another tombs other than six-tombs in the center.

• Journal of Conservation Science
• /
• v.10 no.1 s.13
• /
• pp.31-37
• /
• 2001

The metallurgical investigation of four lumps of bronze from the third building site of the northern workshop site at the Neungsan-ri temple site in Buyeo was performed. The microstructures of a section of sample was observed by SEM and qualitative and quantitative analysis of the sample was performed by EDS. The results are as follows: Sample 1 of the lump of bronze from northern workshop site in the third building site at Neungsan-ri temple site and sample 2 are speculated to be low-quality bronze resulting from refinery of matte which formed on the process of bronze refinery. Sample 3 is speculated as a lump of bronze which is one of Cu-Sn system and the one made by alloy only with pure bronze and tin on the process of bronze refinery. Sample 4 is confirmed as a lump of bronze which is one of Cu-Sn-Pb system from alloy of tin and lead into pure bronze. It is believed that the third building site at Neungsan-ri temple site in Buyeo produced bronze matte by refinery of copper ore or produced low-quality bronze by melting matte imported from outside.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.4-21
• /
• 2021

A stone mold from the Sabi period of Baekje was excavated at the western tombs in Neungsan-ri, Buyeo where there was a recent excavation survey (2016). It was believed and reported that such stone molds were used for copper needles during the early Iron Age; however, a close re-examination of the form revealed that they were used for bifid ornamental hairpins. Given its casting form, the stone mold of Neungsan-ri is estimated to have been used to make bifid ornamental hairpins in a ∩ shape, narrowing down toward the tip. It is considered an artifact of the Goryeo dynasty. The stone used to make the bifid ornamental hairpin mold of Neungsan-ri was chlorite-schist, the principal minerals of which include chlorite, amphibole, and talc. Similar rocks are in nearby Buyeo (Oesan-myeon), Cheongyang, Gongju, and Yesan. They are mainly found between Jiseon-ri, Oesan-myeon, Buyeo, Sucheol-ri, Yesane-up, and Yesan. Nearly 70 bifid ornamental hairpins from the Goryeo dynasty were excavated at Neungsan-ri, Buyeo and the surrounding areas. Among them, the bronze ones excavated from the tombs of Songguk-ri, Buyeo are estimated to have been made using this mold as they closely resemble the Neungsan-ri mold. Stone was likely the preferred material for molds to make bronze artifacts as it was easy to sink a die. Regarding the bifid ornamental hairpin cast excavated in Neungsan-ri, they obtained stones in nearby areas 20~50km from their location, made bronze artifacts, and distributed them to nearby sites during the Goryeo dynasty. These artifacts suggest that the casting technology of using a stone mold was still employed then.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.3
• /
• pp.1-11
• /
• 2016

This study estimated vegetation environment and agricultural activity during the late Holocene inferred from pollen analysis of peat on floodplain of Wangpo-cheon around Neungsan-ri, Buyeo-gun, South Korea. By result of pollen analysis of 28 horizons from Trench NS 1 and NS 4, vegetation environment during 2,300 to 1,700 yr BP was divided into Pollen Zone I (Quercus-Alnus), Pollen Zone II (Quercus-Alnus-Gramineae) and Pollen Zone III (Pinus-NAP-Gramineae). The pollen analysis suggests that agricultural activity in the Buyeo area was widely spread from the early time of the Pre-Iron Age to the late Samhan Age and buckwheat field seem to be built to substitute paddy field during the early time of the Pre-Iron Age.

• Korean Journal of Materials Research
• /
• v.30 no.9
• /
• pp.453-457
• /
• 2020

Tomb No. 1 (Donghachong) of the Buyeo Neungsan-ri Tomb complex (listed as UNESCO World Heritage Site), is a royal tomb of the Baekje Sabi Period. One wooden coffin unearthed there is an important relic of the funerary culture of the Baekje. This study examines the production techniques of gilt-bronze objects attached to the wooden coffin excavated from Donghachong. The base metal of the gilt-bronze object is pure copper, with single α phase crystals in a heterogeneous form containing annealing twins; Au and Hg are detected in the gilt layer. We suggest that the surface of the forging copperplate is gilded using a mercury amalgam technique; it is thought that the annealing twins of the base material formed during the heat treatment process for the sheet metal. The gilt layer is three to five times thicker for the gilt-bronze objects found near the foot of the coffin than those near the head. We estimate the plating process is carried out at least three times because three layers are identified on the plate near the head. Therefore, it is likely that the materials and methods used to construct the gilt-bronze objects found in different parts of the coffin are the same, but the number of platings is different. This research confirms the metal crafting techniques used in Baekje by the examination of production techniques of these gilt-bronze objects. Further, our paper presents an important example of restoration and reconstruction for a museum exhibition, through effective use of scientific analysis and investigation.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.4-17
• /
• 2011

The Baekje's cotton fabrics were excavated from 'Neungsan-ri temple site in Buyeo' (September 1999-April 2000) and stored at Buyeo National Museum after conservation treatment. In this study, it carred out non-destructive, chemical and morphological analysis for fiber identification, also considered on influx, features and difference between the 'Baek-cheop-po(Three kingdom period's cotton fiber)' and 'Mok-myeon(imported by Munikjeom, late Korea dynasty)'. As a result, the fiber proved cellulose fiber through analytical researches like color reaction, FT-IR(chemical analysis). It was also confirmed lumens, typical dimensional structure(morphological analysis) as an features of cotton fiber. The fiber was the first evidence in ancient Korea's cotton. But it can not prove that whether weaving were made in Baekje's area. However there were documentation that people in Beakje make cloth to silk fabric from 'Mahan period'. We can suppose that they have had an old weaving techniques. This study has a great historical, academic values as the only evidence for the hypothesis of a weaving technique of the Baekje's cotton. Through comparison to each region's ancient cottons, we can investigate the species of Baekje's cotton and ancient Korea cotton's influx.

• Conservation Science in Museum
• /
• v.26
• /
• pp.67-82
• /
• 2021

Two golden beads (Buyeo 5336) housed at the Buyeo National Museum were discovered in 1993 near the site of an ancient workshop in Neungsan-ri in Buyeo-gun, Chungcheongnam-do Province. These rare examples from the Baekje Kingdom of an application of granulation have maintained their original form intact, and thus serve as important materials for the investigation of production techniques applied. This study analyzed the composition of the golden beads using a portable X-ray fluorescence analyzer, a stereo microscope, and a scanning electron microscope with an energy dispersive X-ray spectrometer. The manufacturing technique was examined through the observation of the micro-shape and the surface condition and by a composition analysis of the joint part. In both beads, a hole was pierced in a hollow body and the bead was decorated with golden wires around the hole and gold granules in other parts. In some areas, golden granules had been attached to the gold plate and golden wires were then placed over the granules. The purity of both the wires and the granules was analyzed as 23.6 - 23.7K. A high copper content was detected in some of the parts where the granules were attached. The findings of a previous reproduction experiment and study of production methods suggest that the beads were made using the copper diffusion technique.

• Conservation Science in Museum
• /
• v.29
• /
• pp.153-162
• /
• 2023

Clay figure of Baekje, produced by forming and molding various shapes using clay, are mainly excavated from temple sites and provide essential information for studying the Buddhist art of Baekje. Research on clay figures of Baekje primarily focuses on the characteristics of Baekje-era temples in which such figures are excavated, as well as the role and production techniques of clay figures, by comparing regional and morphological characteristics. In particular, research on the manufacturing method of clay figures is mainly carried out by visual observation, whereas precise scientific analysis is required to understand production techniques and characteristics of raw materials in greater detail. In this study, to confirm such production techniques and material characteristics, computed tomography (CT) scans were conducted on the Clay Bodhisattva excavated from the Neungsan-ri Temple site in Buyeo. As a result, it was found that the Clay Bodhisattva was made using a cylindrical core of fine clay, tied together with several thin branches or reeds with straws. The clay used in the figure bore traces indicating the presence of herbaceous plants, which increase adhesion between clay and prevent cracks in the contraction process. On the other hand, the density of the fine clay differs on the inside and outside of the clay figure. Based on this, it is presumed that the clay was applied around the cylindrical core to shape the Clay Bodhisattva. The clay was reapplied on top of the figure to express the detailed shape and pattern.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.13-24
• /
• 2010

This study examined each handiwork method of 4 filigree artifacts from Neungsan-ri temple site in Buyeo, Korea through material characteristic and microstructure analysis. As a result, it was indicated that all of the artifacts have comparatively higher purity than 22.7K and some of filigree artifacts showed that gold is alloyed with silver at a certain ratio. Gold thread that decorates surface showed thickness of 0.2~0.8mm and displayed various forms of section. Gold granule indicated that 2 or 3 granules are adhered together and they are 0.3~0.8mm in diameter. Trace of soldering was observed from gold thread and gold granule joints on surface and it confirmed a possibility of being soldering using gold solder through componential analysis. Also, it reveals a surface decorated with pigments such as cinnabar(HgS) and black.

• The Korean Journal of Quaternary Research
• /
• v.24 no.1
• /
• pp.35-45
• /
• 2010

The aims of this study are to clarify the geomorphological development of a alluvial plain and discuss the vegetation environments and agriculture activities in the Wangpo-River alluvial plain at Neungsan-ri, Buyeo by analyzing geomorphological classification, sedimentary facies and age datings. The alluvial plain at Wangpo-River was formed by the influences of Geum-River with the sea-level rising during the Holocene. The basin of Wangpo-River consists of natural levees, back marsh-type alluvial plains, valley plains and hills. The natural levees by Geum-River largely distributes at the area where Wangpo-River flows to Geum-River and the alluvial plains at the middle and lower reach are the back marsh areas of Geum-River. Moreover, the area along Wangpo-River show higher contents of coarse materials and thinner peat sediments than the back marsh. The lower sandy deposits in the alluvium of Wangpo-River was formed with the influences of human in the Bronze Age during the sea level falling and the peaty deposits was formed due to the water level rising of Wangpo-River during the sea level rising in the early Iron Age.