• Journal of Advanced Navigation Technology
• /
• v.16 no.4
• /
• pp.619-626
• /
• 2012

One-way Network-RTK(Real Time Kinematics) is considered as a method which can satisfy moving vehicle's recently-required high accuracy and mobility. When we use one-way Network RTK for vehicle navigation, multiple cells-based system is required to provide the service continuously in wide area. The rover which moves through various cells inevitably experiences a correction discontinuity, which is not eliminated by the DD(Double Difference) method and to cause 13cm(horizontal) and 48cm(vertical) position error. We suggest three solutions to reduce this discontinuity, which are identification of master RS with neighbor networks, duplication of communication module to receive corrections from other cells, and ambiguity adjustment between neighbor cells. All of our suggestions reduce the error to 1/4 wavelength in measurement and 3cm in position-domain, and we suggest the ambiguity adjustment is the best when we consider the extendibility of service area and the cost of rover device.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.1-11
• /
• 2010

Since January 2009, Seoul Metro Government(SMG) is operating own Network RTK Systems connecting four(4) GNSS Reference Stations which are installed inside Seoul Metro City area. SMG is currently providing VRS data service via wireless internet for Network-RTK and RINEX data observed from GNSS Reference Stations. This paper will discuss utilization of data available from SMG Network-RTK System for various applications, and present the test results on practicalities of Virtual RINEX data. For the utilization of data available from SMG Network- RTK system, 1)NTRIP data delivery of GNSS realtime observables streaming and converting to RINEX at receiving side, 2) monitoring deformation of bulky structures using GNSS observation were discussed. In addition to those discussion, 3) broadcasting VRS correction data for job site via radio modem after acquiring such correction data on-line using NTRIP based GNSS Internet Radio from SMG Network-RTK System were introduced. For the test results on practicalities of Virtual RINEX data, 1) the post-processing results of the GNSS observation data on a certain point with GNSS Reference Station data have been compared to the post-processing results of Virtual RINEX data on the same point generated from SMG Network-RTK System, and 2) VRS RTK positioning results for a certain point and post-processing results of Virtual RINEX data for the point were compared. The results showed only a few mm difference, and the high possibility for using Virtual RINEX data for post-processing applications.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.475-483
• /
• 2013

In this paper, the performances of modeling methods for combining corrections from multiple reference stations for network user were compared and analyzed. The longer the distance between reference station and user is, the more the GPS errors are decorrelated. Based on this point, multiple corrections from reference stations which is constituting a network should be combined properly to be applied for user observation to eliminate GPS errors. There are many widely used conventional modeling methods and they are applied for Compact Network RTK users and user position accuracy is predicted by using residual errors in observation of user. Compact Network RTK is a technique of generating corrections which was developed by Seoul National University. As a result, the horizontal and vertical accuracies were within about 5 cm and 7 cm respectively with 95 % probability for all conventional modeling methods. In addition, we analyzed condition for reference station constellation for modeling method using height information.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.67-73
• /
• 2021

The need for precise location data is growing across numerous markets, and so is the number of affordable high-precision GPS receivers. In this paper, we validated the performance of RTAP2U, a low-cost high-precision RTK receiver that was recently released. Two positioning modes were tested: static and driving. The static test conducted Zero-Baseline Single-RTK and Network-RTK survey for 57 hours and 51 hours, respectively. For the driving test, Network-RTK survey was conducted using VRS services provided by NGII based on Trimble PIVOT and Geo++ GNSMART. The static test showed about 1 cm horizontal and vertical accuracies, which is very stable considering the test duration longer than 50 hours. The integer ambiguity FIX rate marked a solid 100%. The driving test result also reached a 100% FIX rate. Horizontal and vertical accuracies were better than 2 cm and 3 cm, respectively. Researchers can refer to this paper when considering affordable high-precision GPS receivers as an option.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.295-305
• /
• 2018

Network RTK is a highly practical technology that can provide high positioning accuracy at levels between cm~dm regardless of user location in the network by extending the available range of RTK using reference station network. In particular, unlike other carrier-based positioning techniques such as PPP, users are able to acquire high-accuracy positions within a short initialization time of a few or tens of seconds, which increases its value as a future navigation system. However, corrections must be continuously received to maintain a high level of positioning accuracy, and when a time delay of more than 30 seconds occurs, the accuracy may be reduced to the code-based positioning level of meters. In case of SSR, which is currently in the process of standardization for PPP service, the corrections by each error source are transmitted in different transmission intervals, and the rate of change of each correction is transmitted together to compensate the time delay. Using these features of SSR correction is expected to reduce the performance degradation even if users do not receive the network RTK corrections for more than 30 seconds. In this paper, the simulation data were generated from 5 domestic reference stations in Gunwi, Yeongdoek, Daegu, Gimcheon, and Yecheon, and the network RTK and SSR corrections were generated for the corresponding data and applied to the simulation data from Cheongsong reference station, assumed as the user. As a result of the experiment assuming 30 seconds of missing data, the positioning performance compensating for time delay by SSR was analyzed to be horizontal RMS (about 5 cm) and vertical RMS (about 8 cm), and the 95% error was 8.7 cm horizontal and 1cm vertical. This is a significant amount when compared to the horizontal and vertical RMS of 0.3 cm and 0.6 cm, respectively, for Network RTK without time delay for the same data, but is considerably smaller compared to the 0.5 ~ 1 m accuracy level of DGPS or SBAS. Therefore, maintaining Network RTK mode using SSR rather than switching to code-based DGPS or SBAS mode due to failure to receive the network RTK corrections for 30 seconds is considered to be favorable in terms of maintaining position accuracy and recovering performance by quickly resolving the integer ambiguity when the communication channel is recovered.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1690-1696
• /
• 2014

Network RTK generates spatial corrections by using differenced measurements from reference stations in the network, and the corrections are then provided to a rover. The rover, generally, uses linear interpolation, which assumes that the corrections at each reference station are spatially correlated, to obtain a precise correction of its location. However, an irregularity of the tropospheric delay is a real-world factor that violates this assumption. Tropospheric delay is a result of weather conditions, such as humidity, temperature and pressure, and it can cause spatial decorrelation when there are changes in the local climate. In this paper, we have defined the non-linear characteristics of the tropospheric delay between reference stations or user within a region as the "irregularity of tropospheric delay". Such an irregularity can negatively impact the network RTK performance. Therefore, we analyze the influence of the irregularity of tropospheric delay in network RTK based on meteorological data.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.351-360
• /
• 2022

Autonomous vehicles require precise knowledge of their position, velocity and orientation in all weather and traffic conditions in any time. And, these information is effectively used for path planning, perception, and control that are key factors for safety of vehicle driving. For this purpose, a high precision GNSS technology is widely adopted in autonomous vehicles as a core localization and navigation method. However, due to the lack of infrastructure as well as cost issue regarding GNSS correction data communication, only a few high precision GNSS technology will be available for future commercial autonomous vehicles. Recently, a high precision GNSS sensor that is based on a Broadcast-RTK system to dramatically reduce network maintenance cost by utilizing the existing broadcasting network is released. In this paper, we present the performance test result of the broadcast-RTK-based commercial high precision GNSS receiver to test the feasibility of the system for autonomous driving in Korea. Massive measurement campaigns covering of Korea region were performed, and the obtained measurements were analyzed in terms of ambiguity fixing rate, integer ambiguity loss recovery, time to retry ambiguity fixing, average correction information update rate as well as accuracy in comparison to other high precision systems.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.546-554
• /
• 2014

For improvement of network RTK performance in survey field, Spatial Information Research Institute (SIRI), LX Korea Cadastral Survey Corporation installed 30 GNSS permanent stations in Korea Peninsula, and has been running the MAC-based network RTK service as a test version. In this paper, we introduce the LX GNSS network and analyze the positioning accuracy of the LX MAC RTK service. For field test of the LX MAC RTK service, we installed temporally fixed anchor points and observed simultaneously with VRS of National Geographic Information Institute. As a result, the horizontal position differences and initial times of LX MAC with respect to NGII VRS are $1{\sim}2{\pm}1cm$ and <10 seconds, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6196-6203
• /
• 2013

This study examined cadastral surveying technology regulated under the "Special Law for the cadastral surveying", and analyzed the related surveying methods currently used. Based on the analysis, this study suggested the efficient application plan future cadastral surveying projects. The new technologies analyzed were GNSS, GPS RTK, Network RTK, GPS Augmentation System, and the mobile and auto sighting TS. As a result of the analysis, this study suggests that if a receiving technology is possible for the integrated receiving of GPS/GLONASS/Galileo systems, both the accuracy of location determination could be enhanced and stable data could be obtained. The Network RTK technology may solve the constraint receiving factors of satellite information in the long term if a GPS Augmentation System is used. Finally, mobile and auto sighting TS technologies can reduce the personnel factors, but can be applied after the offset problem is overcome.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.1
• /
• pp.181-191
• /
• 2015

In the present study, the 2013 survey Uiwang pointed out how the Resurvey of Cadastre ed projects reviewed relation to the business carried GPS-RTK (Network, Single) and total station surveying (T/S) to analyze and to compare the performance of Time Measurement Accuracy urban areas Resurvey of Cadastre was to present an effective survey methods in the business district. In this study, Uiwang review survey results indicated a comprehensive evaluation of the results, which are concentrated in urban areas, the building of intelligent review of GPS-RTK surveying methods is avoided by the measurement method to establish the first principles method based on total station surveying the GPS-RTK survey to draw conclusions appropriated to take advantage of the assistance and inspection methods.