• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.87-90
• /
• 1998

Many recent studies have been conducted involving the transport of constant and variable bit rate MPEG-2 video in asynchronous transfer mode (ATM) networks. In this study, the traffic control of supporting MPEG-2 video communications in ATM networks under unloaded or loaded network conditions, in which the generated traffic sources are bursty in nature, are considered. We analyse about MPEG-2 traffic and design a model, which makes use of the ATM OAM funcation in order to support the traffic control functions. To implement the model, we propose a scheme, which combines the performance management OAM function and the bandwidth allocation function. Especially, we design this scheme to control the VBR (Variable Bit Rate)MPEG-2 video traffic.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.129-132
• /
• 1999

In this Paper, new congention control schemes using the adaptive rate control for ATM LANs are presented. If is preferable for hosts in LANs to be able to send bursts at the same speed as the interface link speed in a lightly loaded condition, and as the network load increases, to reduce their traffic rate adaptively in order to avaid network congestion. We propose to apply such a rate control concept for two different traffic classed in the ATM LANs. For the first traffic class requiring no bandwidth reservation, i.e, a best effort service class, a combination of the end-to-end adaptive peak rate control with the link-by-link backpressure control is proposed. For the second traffic class, requiring the bandwidth reservation for the burst transmission, i.e. guaranteed burst service class, a combination of he adaptive peak rate control with the fast bandwidth reservation is proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.295-303
• /
• 2004

In this Paper, we discuss an active TCP link of unsynchronized transmission mode network in two-way traffic and the Improvement of its traffic patron thorough the network pathway of protocol is shown. This is because the traffic pattern is performed on the basis of existing windows which are distributing information in several periods of time in the way of interfacing LTS control module, which is controlling by an information of exceeding the time limit of feedback loop determined by RTP, with TCP. The simulation to utilize this efficiently is performed with the circumstance of bench mark based on physical modeling of the self-similarity traffic in the performance of TCP. In this paper, we use a methodology to understand and evaluate the effect of change of transmitting protocol in sticks under the condition of the self-similar traffic in two-way network and it is shown that an improvement of congestion control by self-similarity under a heavy condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.510-517
• /
• 2008

In wireless sensor networks, a number of nodes deployed in dense manner should be self-configured to establish a topology that provides communication and sensing coverage under stringent energy constraints. To establish an efficient topology, we propose the TRaffic-Aware Topology control (TRAT) algorithm that reduces energy dissipation by considering total amount of data flows in the network. Our algorithm controls the number of active nodes with traffic information and adjusts nodal transmission power by estimating amount of data flows. According to the result, the proposed algorithm shows about 30% better performance than the other methods in terms of energy efficiency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.7
• /
• pp.602-610
• /
• 2000

In communication networks used in safety-critical systems such as control systems in nuclear power plants there exist three types of data traffic : urgent or asynchronous hard real-time data hard real-time periodic data and soft real-time periodic data. it is necessary to allocate a suitable bandwidth to each data traffic in order to meet their real-time constraints. This paper proposes a method to meet the real-time constraints for the three types of data traffic simultaneously under a timer-controlled token bus protocol or the IEEE 802.4 token bus protocol and verifies the validity of the presented method by an example. This paper derives the proper region of the high priority token hold time and the target token rotation time for each station within which the real-time constraints for the three types of data traffic are met, Since the scheduling of the data traffic may reduce the possibility of the abrupt increase of the network load this paper proposes a brief heuristic method to make a scheduling table to satisfy their real-time constraints.

• Journal of Korea Multimedia Society
• /
• v.18 no.2
• /
• pp.189-198
• /
• 2015

Despite the fact that traffic engineering techniques have been comprehensively utilized in the past to enhance the performance of communication networks, the distinctive characteristics of Software Defined Networking (SDN) demand new traffic engineering techniques for better traffic control and management. Considering the behavior of traffic, large flows normally carry out transfers of large blocks of data and are naturally packet latency insensitive. However, small flows are often latency-sensitive. Without intelligent traffic engineering, these small flows may be blocked in the same queue behind megabytes of file transfer traffic. So it is very important to identify large flows for different applications. In the scope of this paper, we present an approach to detect large flows in real-time without even a short delay. After the detection of large flows, the next problem is how to control these large flows effectively and prevent network jam. In order to address this issue, we propose an approach in which when the controller is enabled, the large flow is mitigated the moment it hits the predefined threshold value in the control application. This real-time detection, marking, and controlling of large flows will assure an optimize usage of an overall network.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.428-437
• /
• 2007

Along with the development of network, more and more functions and services are required by users, while traditional network fails to support all of them. Although overlay is a good solution to some demands, using them in an efficient, scalable way is still a problem. This paper puts forward a framework on how to construct an efficient, scalable overlay mesh in real network. Main differences between other overlays and ours are that our overlay mesh processes some nice features including class-of-service(CoS) and traffic engineering(TE). It embeds the end-to-end optimal traffic control law which can distribute traffic in an optimal way. Then, an example is given for better understanding the framework. Particularly, besides good scalability, and failure recovery, it possesses other characteristics such as routing simplicity, self-organization, etc. In such an overlay mesh, an applicable source routing scheme called hierarchical source routing is used to transmit data packet based on UDP protocol. Finally, a guideline derived from a number of simulations is proposed on how to set various parameters in this overlay mesh, which makes the overlay more efficient.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.1-10
• /
• 2016

This paper considers WiMedia UWB network based wireless ship area network (WSAN) so as to support high-quality multimedia video data services and important shipboard control data. In this paper, prioritized contention access (PCA) and distributed reservation protocol (DRP) based on WiMedia UWB (ECMA-368) MAC protocols are combined and proposed to support mixed high-quality video traffic and shipboard control data traffic applying varying DRP and PCA data periods according to channel condition and link parameter ptimization. It is shown that the proposed dynmaic channel allocation of WiMedia UWB MAC protocol can provide reliable mixed video and shipboard control data traffic as well.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.6
• /
• pp.927-936
• /
• 1995

ATM Forum has defined a new service class for data applications called Available Bit Rate(ABR) Service, which has highly bursty traffic and unpredictable burst size. It is desirable that we reduce the probability of retrans mission of packets by minimizing the loss of cells because the traffic is much more sensitive to loss than delay. The Forum has also selected the Rate-Based Control for the ABR service and proposed EPRCA as the control mechanism for the service. This paper proposes the combination of EPRCA and the other feedb ack control mechanisms such as BECN and BP. The combined control mechanism control ABR traffic more efficiently and the simulation results show that the network performance can be improved by choosing the appropriate parameters.

• Computers and Concrete
• /
• v.32 no.4
• /
• pp.411-423
• /
• 2023

The rapid development of road transport has increased the number of bridges that require widening. A critical issue in the construction of bridge widening is the influence of vibrations of the old bridge on the casting of wet joint concrete between the old and new bridges owing to the running traffic. Typically, the bridge is closed to traffic during the pouring of wet joint concrete, which negatively affects the existing transportation network. In this study, a newly developed microscopic traffic load modeling approach and the vehicle-bridge interaction theory are incorporated to develop a refined numerical framework for the analysis of random traffic-bridge coupled dynamics. This framework was used to investigate traffic-induced vibrations at the wet joint of a widened bridge. Based on an experimental study on the vibration resistance of wet joint concrete, traffic control strategies were proposed to ensure the construction performance of cast-in-site wet joint concrete under random traffic without interruption. The results show that the vibration displacement and frequency of the old bridge, estimated by the proposed framework, were comparable with those obtained from field measurements. Based on the target peak particle velocity and vibration amplitude of the wet joint concrete, it was found that traffic control measures, such as limiting vehicle gross weight and limiting traffic volume by closing an additional traffic lane, could ensure the construction performance of the wet joint concrete.