• 상하수도학회지
• /
• 제12권2호
• /
• pp.90-98
• /
• 1998

The optimal rechlorination in water distribution systems was investigated by incorporating optimization techniques into a numerical water quality model. For a hypothetical system that consists of 10 junctions including a storage tank and 12 links, the bulk ($k_b$) and pipe-wall ($k_w$) decay-rate constants of chlorine residual are assumed to be 2.0 1/day and 1.5 m/day, respectively. It was also assumed that the lower and upper limits of chlorine residual in the network are 0.2 mg/L and 0.6 mg/L. When the chlorine source is only the storage tank (without rechlorination), the high levels of chlorine residual appear near the storage tank to maintain the chlorine residuals above the lower limit over the junctions. On the other hand, the chlorine residuals in the network are distribute within the desirable range (0.2 - 0.6 mg/L) after the optimal rechlorination through five injection sites including the storage tank. In case of a real water distribution system that comprises 28 junctions including a clear well and 27 links, the bulk and pipe-wall decay-rate constants are 0.3 1/day and 0.2 m/day, respectively. Before rechlorination, the required chlorine residual at the clearwell is 5.1 mg/L to keep the chlorine residuals above the minimum level (0.6 mg/L) over the junctions. By the optimal rechlorination at five injection sites, the chlorine residuals are distributed within a desirable range of 0.6 mg/L through 2.0 mg/L, which can avoid the excess of chlorine residuals near the clear well. Consequently, total chlirine doses are decreased by 81% in the hypothetical distribution network and 69 % in the real distribution network for satisfying the minimum chlorine residuals.

• Advanced Composite Materials
• /
• 제18권3호
• /
• pp.233-249
• /
• 2009

Safe installation and operation of high-pressure composite cylinders for hydrogen storage are of primary concern. It is unavoidable for the cylinders to experience temperature variation and significant thermal input during service. The maximum failure pressure that the cylinder can sustain is affected due to the dependence of composite material properties on temperature and complexity of cylinder design. Most of the analysis reported for high-pressure composite cylinders is based on simplifying assumptions and does not account for complexities like thermo-mechanical behavior and temperature dependent material properties. In the present work, a comprehensive finite element simulation tool for the design of hydrogen storage cylinder system is developed. The structural response of the cylinder is analyzed using laminated shell theory accounting for transverse shear deformation and geometric nonlinearity. A composite failure model is used to evaluate the failure pressure under various thermo-mechanical loadings. A back-propagation neural network (NNk) model is developed to predict the maximum failure pressure using the analysis results. The failure pressures predicted from NNk model are compared with those from test cases. The developed NNk model is capable of predicting the failure pressure for any given loading condition.

• 시스템엔지니어링학술지
• /
• 제15권2호
• /
• pp.66-71
• /
• 2019

In digital pathology, an electronic system in the biomedical domain storage of the files is a big constrain and because all the analysis and annotation takes place at every user-end manually, it becomes even harder to manage the data that is being shared inside an enterprise. Therefore, we need such a storage system which is not only big enough to store all the data but also manage it and making communication of that data much easier without losing its true from. A virtual server setup is one of those techniques which can solve this issue. We set a main server which is the main storage for all the virtual machines(that are being used at user-end) and that main server is controlled through a hypervisor so that if we want to make changes in storage overall or the main server in itself, it could be reached remotely from anywhere by just using the server's IP address. The server in our case includes XML-RPC based API which are transmitted between computers using HTTP protocol. JAVA API connects to HTTP/HTTPS protocol through JAVA Runtime Environment and exists on top of other SDK web services for the productivity boost of the running application. To manage the server easily, we use Tkinter library to develop the GUI and pmw magawidgets library which is also utilized through Tkinter. For managing, monitoring and performing operations on virtual machines, we use Python binding to XML-RPC based API. After all these settings, we approach to make the system user friendly by making GUI of the main server. Using that GUI, user can perform administrative functions like restart, suspend or resume a virtual machine. They can also logon to the slave host of the pool in case of emergency and if needed, they can also filter virtual machine by the host. Network monitoring can be performed on multiple virtual machines at same time in order to detect any loss of network connectivity.

• 인터넷정보학회논문지
• /
• 제16권5호
• /
• pp.29-38
• /
• 2015

에너지 저장장치(Energy Storage System)은 전력 수요가 적을 때 전력을 저장해 두었다가 수요가 발생하거나 비상시 저장된 전력을 사용함으로 전기 에너지를 저장하여 필요할 때 사용 가능함으로써 에너지 이용 효율 향상, 전력공급 시스템 안정화 및 신재생 에너지 활용도 향상 효과를 가지는 시스템이다. 최근 세계적으로 에너지의 효율적인 소비에 대한 관심이 증대되면서 전력의 안정적인 공급을 원하는 수요자와 전력 수요 평준화를 원하는 공급자의 요구를 충족시켜줄 수 있는 에너지 저장장치의 필요성이 증대되고 있다. 현재 에너지 저장장치를 구성하는 Power Conditioning System(PCS), Battery Management System(BMS), 배터리 셀은 제조사별로 상이한 규격을 가진다. 이로 인해 각 핵심 부품 간 인터페이스가 규격화되어 있지 않아, 에너지 저장장치의 구성 및 운영에 난점으로 작용하고 있다. 본 논문에서는 제조사별로 상이한 특징을 가지는 부품들의 설정과 효율적 운영에 필요한 정보를 수용하여 에너지 저장장치를 구성할 수 있는 XML 기반의 에너지 시스템 전용 프로파일 시스템의 설계와 분석방안을 제안한다. 제조사별 PCS, BMS, 배터리 셀과 그 외의 주변 기기들의 설정 정보 및 운영 정보를 분석하여 프로파일 규격을 정의하고, 에너지 저장장치에 적용할 수 있는 프로파일 어댑터 소프트웨어를 설계 및 구현한다. 프로파일 어댑터를 통해 생성된 프로파일은 설정 프로파일과 운영 프로파일로 구성되며, 추후 확장성을 고려하여 표준 XML의 규격을 따른다. 구현된 프로파일 시스템의 검증은 에너지 저장장치 시스템에 적용되어 기본적인 충 방전 동작을 통해 정상 동작 결과를 제안한다.

• International Journal of Contents
• /
• 제13권1호
• /
• pp.45-52
• /
• 2017

Carbon Capture and Storage (CCS) technologies involve three major stages, i.e., capture, transport, and storage. The transportation stage of CCS technologies has received relatively little attention because the requirements for $CO_2$ transport differ based on the industry-related conditions, geological, and demographical characteristics of each country. In this study, we analyzed the properties of $CO_2$ transport using a pipeline. This study has important implications for ensuring the stability of a long-term CCS as well as the large cost savings, as compared to the small cost ratio as a percentage of the entire CCS system. The state of $CO_2$, network topologies, and node distribution are among the major factors that influence $CO_2$ transport via pipelines. For the analysis of the properties of $CO_2$ transport using a pipeline, the $CO_2$ pipeline connections were visualized by the simulator developed by Lee [11] based on the network topologies in $CO_2$ transport. The case of Korean CCS technologies was applied to the simulation.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제3권12호
• /
• pp.433-442
• /
• 2014

분산 파일시스템의 클라이언트 측에 SSD 장치를 캐시 장치로 사용하여 분산 파일시스템의 읽기 성능을 향상시키고, Back-end 데이터 서버의 부하를 줄일 수 있다. 이러한 성능 향상을 통하여 기존의 대용량 스토리지 지원만이 가능했던 분산 파일시스템의 적용 분야를 고성능이 필요한 분야로 확장할 수 있다. 본 논문은 국내에서 개발된 분산 파일시스템인 MAHA-FS에 클라이언트 측의 SSD 캐시를 적용하여 가상 데스트톱의 입출력 성능을 향상시킬 수 있음을 보여준다. 실험 결과 NFS에 비해 가상 머신 이미지 배포 시간은 2배 이상, 부팅 시간은 3배 이상 향상시킬 수 있음을 알 수 있다.

• International Journal of Computer Science & Network Security
• /
• 제24권4호
• /
• pp.141-146
• /
• 2024

A local area network (LAN) is a computer network within a small geographical area such as a home, school, computer laboratory, office building or group of buildings. A LAN is composed of interconnected workstations and personal computers which are each capable of accessing and sharing data and devices, such as printers, scanners and data storage devices, anywhere on the LAN. LANs are characterized by higher communication and data transfer rates and the lack of any need for leased communication lines. Communication between remote parties can be achieved through a process called Networking, involving the connection of computers, media and networking devices. When we talk about networks, we need to keep in mind three concepts, distributed processing, network criteria and network structure. The purpose of this Network is to design a Local Area Network (LAN) for a BAEC (Bangladesh Atomic Energy Commission) Head Quarter and implement security measures to protect network resources and system services. To do so, we will deal with the physical and logical design of a LAN. The goal of this Network is to examine of the Local Area Network set up for a BAEC HQ and build a secure LAN system.

• ETRI Journal
• /
• 제45권4호
• /
• pp.650-665
• /
• 2023

A novel smart metering technique capable of anomaly detection was proposed for real-time home power management system. Smart meter data generated in real-time were obtained from 900 households of single apartments. To detect outliers and missing values in smart meter data, a deep learning model, the autoencoder, consisting of a graph convolutional network and bidirectional long short-term memory network, was applied to the smart metering technique. Power management based on the smart metering technique was executed by multi-objective optimization in the presence of a battery storage system and an electric vehicle. The results of the power management employing the proposed smart metering technique indicate a reduction in electricity cost and amount of power supplied by the grid compared to the results of power management without anomaly detection.

• International Journal of Computer Science & Network Security
• /
• 제24권8호
• /
• pp.43-53
• /
• 2024

Access control systems are used to control the access of people to assets. In practice, assets are either tangible (e.g. goods, cash, etc.) or data. In order to handle tangible assets, a person must physically access the space in which the assets are located (e.g. a room or a building). Access control systems for this case have been known since antiquity and are based either on mechanical locks or on certificates. In the middle of the 20th century, systems based on electromagnetic phenomena appeared. In the second half of the same century, the need to control access to data also arose. And since data can also be accessed via a computer network, it was necessary to control not only the access of persons to areas with data storage, but also to control the electronic communication of persons with these storage facilities. The different types of the above systems have developed separately and more or less independently. This paper provides an overview of the current status of different types of systems, showing that these systems are converging technologically based on the use of electronics, computing and computer communication. Furthermore, the terminology and architecture of these systems is expanded in the article to allow a unified description of these systems. The article also describes the most common types of access control system configurations.

• International Journal of Computer Science & Network Security
• /
• 제21권12호
• /
• pp.248-256
• /
• 2021

Now that we're in the big data era, data has taken on a new significance as the storage capacity has exploded from trillion bytes to petabytes at breakneck pace. As the use of cloud computing expands and becomes more commonly accepted, several businesses and institutions are opting to store their requests and data there. Cloud storage's concept of a nearly infinite storage resource pool makes data storage and access scalable and readily available. The majority of them, on the other hand, favour a single cloud because of the simplicity and inexpensive storage costs it offers in the near run. Cloud-based data storage, on the other hand, has concerns such as vendor lock-in, privacy leakage and unavailability. With geographically dispersed cloud storage providers, multicloud storage can alleviate these dangers. One of the key challenges in this storage system is to arrange user data in a cost-effective and high-availability manner. A multicloud storage architecture is given in this study. Next, a multi-objective optimization problem is defined to minimise total costs and maximise data availability at the same time, which can be solved using a technique based on the non-dominated sorting genetic algorithm II (NSGA-II) and obtain a set of non-dominated solutions known as the Pareto-optimal set.. When consumers can't pick from the Pareto-optimal set directly, a method based on Principal Component Analysis (PCA) is presented to find the best answer. To sum it all up, thorough tests based on a variety of real-world cloud storage scenarios have proven that the proposed method performs as expected.