• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2782-2786
• /
• 2011

In this paper a protocol design for bus network communication between onboard signalling system and MMI(Man Machine Interface) will be presented and illustrated. Recently, many onboard signailling systems adopt hot standby for safety reasons. Hot standby is a method of redundancy in which the primary and secondary systems run simultaneously. It is convenient to use bus network(bus topology) in a hot standby system for communication between onboard signalling system and MMI. Because bus network is the simplest way to connect multiple clients such as onboard signalling system, MMI and etc. However, there are many problems when two clients want to transmit at the same time on the same bus. A effective protocol is necessary to solve that problems. We will describes protocol design which is useful when onboard signalling systems and MMIs are connected via RS485(Bus Network).

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.209-214
• /
• 2007

In this paper, we proposed a new MANET (Mobile Ad hoc Networks) technology of routing protocol. The MANET has a mobility formation of mobile nodes in the wireless networks. Wireless network have two types architecture: the Tree based multicast and shared tree based. The two kind's architecture of general wireless networks have difficult to solve the problems existing in the network, such as connectivity, safety, and reliability. For this purpose, as using that ADDMRP (Ad hoc network Doppler effect-based for Dynamic Multicast Routing Protocol), this study gives the following suggestion for new topology through network durability and Omni-directional information. The proposed architectures have considered the mobility location, mobility time, density, velocity and simultaneous using node by Doppler effects and improved the performance.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.575-580
• /
• 2017

In these days, the big-size and high resolution multimedia file is widely used through networks. To transfer and service effectively, the internet network technology is necessary to substitute broadcasting. Normally Content Delivery Network(CDN) is widely used in conventional internet for multimedia services. But it has a small bandwidth to service. So to solve this problems, many researchers have suggest the protocol for download, content distribution/saving, server synchronization, caching, pushing rate, and streaming etc. But all of these has some defects like low resolution, packets loss and delay, real application implementations etc. So, this paper suggests a new method of network protocol based on P2P collaboration and user's content using information. And it evaluated the performance of suggested method. As the results, it showed the effectiveness of 4 performances indices : download speed, decreasing rate of connected user in same time, adaptive hit ratio, traffic decreasing rate.

• 정보통신설비학회논문지
• /
• 제3권2호
• /
• pp.18-25
• /
• 2004

As using of network Increases rapidly, performance of system has been deteriorating because of the overhead and bottleneck. Nowadays, high speed I/O network standard, that is a sort of InfiniBand, PCI Express and so on, has come out to improve the limites of traditional I/O bus. The InfiniBand provides some protocols to service the applications such as SDP, SRP and IPoIB. In our paper, We explain the architecture of SDP(Socket Direct Protocol) and its features in channel based I/O network. And so, we provide a result of performance evaluation of SDP which is compared with current network protocol. Our experimental results also show that SDP is better than TCP/IP protocol.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.82.4-82
• /
• 2001

Requirements for device control networks differ greatly from those of data (business) networks. Consequently, any control network which uses a filedbus protocol is, in general, different from If network protocol TCP/IP. One then needs to integrate both fieldbus protocol and TCP/IP to realize distributed control over IP network or internet. LonWorks technology provides networked intelligent I/O and controllers which make it a powerful, expandable solution. Connecting these remote Lon Works networks to the Internet can provide a powerful, integrated, distributed control system. This paper suggests a basic concept that be applied to distributed control over IP network or internet. Specially, Lonworks technology that used LonTalk protocol is reviewed as device network and ...

• 대한임베디드공학회논문지
• /
• 제7권6호
• /
• pp.291-300
• /
• 2012

This paper deals with the design and implementation of wireless sensor network protocol for smart power outlet system capable of fire detection, power monitoring, standby power cutoff, and home automation. The proposed protocol integrates both the CSMA and the TDMA protocols for low power consumption and good scalability. A prototype smart power outlet system employing the proposed protocol and a simple home automation network including the power outlet system have been implemented for evaluating the feasibility of the proposed protocol The result shows that the proposed protocol allows the power outlet system to be scalable with high power efficiency.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.76-91
• /
• 1996

In this paper, we proposed the new medium access control protocol for the virtual token bus netowrk. The network is applied to inter-processor communication network of large capacity digital switching system and digital mobile system with distributed control architecture. in the virtual token bus netowrk, the existing medium access control protocols hav ea switchove rtime overhead when traffic load is light or asymmetric according ot arbitration address of node that has message to send. The proposed protocol optimized average message delay using cyclic bus access chain to exclude switchover time of node that do not have message to send. Therefore it enhanced bus tuilization and average message delay that degrades the performance of real time communication netowrks. It showed that the proposed protocol is more enhacned than virtual token medium access control protocol and virtual token medium access control protocol iwth reservation through performance analysis.

• 전기학회논문지P
• /
• 제52권3호
• /
• pp.95-99
• /
• 2003

In this paper, the power system automation based on CAN communication protocol is introduced. Along with digitalization of electrical device, the various on-line services such as remote control, remote monitoring, remote parameter setting, fault data recording and remote diagnostic have been realized and become available. Therefore, it is necessary for those electrical devices to have real-time and reliable communication protocols. Author proposes DNPC(Distributed Network Protocol with CAN) which is proper to the power system SCADA (Supervisory Control And Data Acquisition) and DCS (Distributed Control System). The physical and datalink layer of DNPC protocol consists of the CAN2.0B which has the real-time characteristics and powerful error control scheme. As the transport and application layer, DNP3.0 is adopted because of its flexibility and compatible feature. Using the DNPC protocol, the power system automation is realized.

• 한국멀티미디어학회논문지
• /
• 제24권8호
• /
• pp.1068-1075
• /
• 2021

Wireless sensor network (WSN) can be usefully used in battlefields requiring rapid installation and operation by enabling surveillance and reconnaissance using small sensors in areas where any existing network infrastructure is not formed. As WSN uses battery, energy efficiency acts as a very important issue in network survivability. Layer-based routing protocols have been studied a lot in the aspect of energy efficiency. Many research selected LEACH and PEGASIS protocols as their comparison targets. This study examines the two protocols and LECEEP, a protocol designed by combining their advantages, and proposes a new protocol, A-LECEEP, which is more energy efficient than the others. The proposed protocol can increase energy efficiency compared to the existing ones by eliminating unnecessary transmissions with multiple chains configuration.

• International Journal of Computer Science & Network Security
• /
• 제22권10호
• /
• pp.137-144
• /
• 2022

Wireless community networks (WCNs) are considered another form of ownership of internet protocol (IP) networks, where community members manage and own every piece of equipment in a decentralized way, and routing for traffic is done in a cooperative manner. However, the current routing protocols for WCNs suffer from stability and scalability issues. In this paper, an enhanced routing protocol is proposed based on the optimized link state routing (OLSR) protocol to meet the standards of efficiency in terms of stability and scalability. The proposed routing protocol is enhanced through two phases: multicasting expansion and multipoint relay (MPR) selection based on an analytical hierarchical process (AHP). The experimental results demonstrate that the proposed routing protocol outperforms the OLSR protocol in terms of network control overhead and packet delivery ratio by 18% and 1% respectively.