• Journal of Korean Association for Spatial Structures
• /
• v.19 no.4
• /
• pp.103-110
• /
• 2019

The cable-based retractable membrane roof makes it impossible to maintain its shape and stiffness during driving process, unlike the hard-type retractable roof. Consequently, monitoring using a relatively simple wireless video transmission device is required. However, since video data has a bigger transmission rating than other monitoring data in terms of the structure velocity or acceleration, there is a need to develop transmission device that is easy to install and entails low maintenance cost. This paper studies on a real-time video transmission system for monitoring the cable-based retractable membrane roof while driving. A video transfer software, using the mobile network, is designed and the embedded system is constructed. Ultimately, the data transmission server is tested. Connecting a trolley to the system allows testing of the validity and efficiency of the developed system through the video data transmitted in the driving process. Result of the test shows that the developed system enables multi-device data transfer with monitoring via the mobile network.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.117-121
• /
• 2015

$O_2$-deficiency related accidents occur every year and the most effective way to prevent them is to measure $O_2$ concentration in air with a properly-calibrated $O_2$ monitoring device before entering low-$O_2$ areas. An electro-chemical sensor, Texas Instrument gas platform, and iPhone are used to construct a smartphone-based $O_2$ monitoring device. The smartphone based $O_2$ measuring approach offers advantages of small size, accessibility, internet-connectivity, and programmability in comparison to conventional $O_2$ measuring devices. Multiple gas sensors can be conveniently interfaced to single smartphone, allowing for creating a network of gas sensors distributed across workplaces and remote monitoring via existing mobile communication network. To check proper function of the $O_2$ monitoring device the sensor was exposed to shallow and deep human breaths. The readings decreased immediately after being exposed to exhalation and recovered during inhalation to a calibrated level of 20.9%. When readings decreased below a preset warning value of 19.5%, a low $O_2$ warning was successfully activated on the smartphone.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.5
• /
• pp.290-294
• /
• 2003

Using a backpropagation neural network (BPNN), a high power semiconductor device was empirically modeled. The device modeled is a n-LDMOSFET and its electrical characteristics were measured with a HP4156A and a Tektronix curve tracer 370A. The drain-source current $(I_{DS})$ was measured over the drain-source voltage $(V_{DS})$ ranging between 1 V to 200 V at each gate-source voltage $(V_{GS}).$ For each $V_{GS},$ the BPNN was trained with 100 training data, and the trained model was tested with another 100 test data not pertaining to the training data. The prediction accuracy of each $V_{GS}$ model was optimized as a function of training factors, including training tolerance, number of hidden neurons, initial weight distribution, and two gradients of activation functions. Predictions from optimized models were highly consistent with actual measurements.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.557-558
• /
• 2007

변화, 발전하는 IT기술과 디지털 기술, 그리고 네트워킹 기술 등에 따라 변전소의 운용 및 자동화 부문에 있어서도 적지 않은 변화가 일어나고 있다. 변전소의 건설 및 운용 면에 있어서도 예외가 아니며, 관련된 관심 사항으로는 시스템 구축 및 운용 시의 경제적인 측면, 시스템의 신뢰성, 그리고 유지보수 및 설비 관리의 효율성 등을 언급할 수 있다. 최근의 기술 추세는 Ethernet 통신 기반의 Network Device를 근간으로 하는 시스템으로의 변신을 주장하고 있으며, 세계 유수의 전력 설비 Maker에서도 이에 부응하기 위한 Network Device를 개발, 출시하고 있는 실정이다. 당소에서도 이와 같은 기술 추세에 부응하여 소위 미래형 변전소에서 요구되는 각종 ND의 개발을 추진하고 있으며, 그 첫번째 결과물로 154kV GIS의 운용 시에 요구되는 각종 제어 및 감시를 위한 Digital Control Unit(이하 DCU)을 개발하였다. 두 번째로 이와 같은 DCU와 연계하여 기존의 Remote Control 기능을 구비하고 상위시스템과 연결되며 변전실내에서 운용되는 Remote Control Unit(이하 RCU)을 개발하였다. 마지막으로 예방진단 시스템과 관련하여 주요 전력 설비의 상태 정보를 취합하는 Serial 통신 기반의 Static Type의 Diagnostic Analysis Unit(이하 DAU)을 하나의 Network Device로 개발함으로써 감시, 진단, 제어 등의 요구기능이 일체화 된 네트워크 기반의 미래형 변전소 자동화 시스템 구축에 한걸음 다가가는 기반을 마련하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1311-1324
• /
• 2019

In the traditional cellular network communication, the cellular user and the base station exchange information through the uplink channel and downlink channel. Meanwhile, device-to-device (D2D) users access the cellular network by reusing the channel resources of the cellular users. However, when cellular user channel conditions are poor, not only D2D user cannot reuse its channel resources to access the network, but also cellular user's communication needs cannot be met. To solve this problem, we introduced a novelty D2D communication mechanism in the downlink, which D2D transmitter users as half-duplex (HD) relays to assist the downlink transmission of cellular users with reusing corresponding spectrum. The optimization goal of the system is to make the cellular users in the bad channel state meet the minimum transmission rate requirement and at the same time maximize the throughput of the D2D users. In addition, i for the purpose of improving the efficiency of relay transmission, we use two-antenna architecture of D2D relay to enable receive and transmit signals at the same time. Then we optimized power of base station and D2D relay separately with consideration of backhaul interference caused by two-antenna architectures. The simulation results show that the proposed HD relay strategyis superior to existing HD and full-duplex (FD) models in the aspects of system throughput and power efficiency.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.484-489
• /
• 2002

Whenever the accidents occur in the railway areas, their prompt recovery is very important. The individual way has been used to resolve these accidents by direct visiting the site and reporting to others who cares for these cases. As a result, we are planning to operate the MTS (Moving picture Transmission System) for a timely information's transmission to the related peoples in the central control center by transforming the picture information on the accident-site to the digital information. The proposed system is not a transmission system using exclusive lines, but utilizing the existing railway computer network. We construct a network server device so that a dispatcher can easily connect with the server through the railway intranet. In some railway environments such as disturbed field situations and geographical condition(in tunnels and bridges, etc) building up the wired network is difficult. Solving this problem, we reviewed the wireless network. Finally we proposed the mixed wireless network that is able to cover the wired network. We then installed and tested the wired network and wireless network respectively in wayside of a railway field. Through the testing, we identified many detailed matters for some network construction approaches to the control room and many field device-connecting schemes. This research will contribute to minimize the number of staff dispatched to a disturbed field, decrease the accident recovery time and improve the quality of service to the passenger.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.31-37
• /
• 2015

Recently, mobile phones have become necessary tools for everyday life. In this study, a device that can serve as a separation between a touch panel and an LCD module in a mobile phone was devised for mass repair processes at a smaill business. We used a wire cutting method to separate the bonding plate area between the modules. The device is composed of DC motors and stepping motors that can deliver a precise cutting motion. The motor control system is connected by individual control modules to a CAN network. The developed device showed excellent performance at high temperature conditions.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.485-488
• /
• 2000

This paper proposes to design the residential power line communication device using Softwire Protocol, which targets the device with 8bit micro-controller and small-size memory based on low-rate power line communication network or wireless communication network. As a case study, the SCP message specification of air-conditioner that has capability of control and monitoring its status is designed using Softwire Protocol. And, it is described how the device operates sequentially.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.253-256
• /
• 1997

In this study, we developed a portable device which monitors and analyzes a vibration signal happened to machines. This device is based on PDA which is smaller thant a palm of the hand, but it has powerful computing ability as much s a computer with 100MHz CPU and an operating system called Windows CE. As a preprocess for a diagnosis of a rotating machine, training artificial neural network based on PC is performed, and the device will diagnose the condition of a rotating machine using weight values as a result of the training ANN.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.285-291
• /
• 2014

Recent, development of wireless communication devices are rapidly and these device being deployed to the user very fast. By this results, a wired network device and the new device such as wireless devices incorporate. Then a demand of new mesh network is rapidly growing. In this wired/wireless integrated network environment, the network is configured automatically, and a user or wireless communication devices must be provided for authentication services. But, these services do not in the real world. Therefore, in this paper, we propose that wired/wireless integrated network environment to automatically configure the network using OpenFlow and the authentication system using Kerberos method. Our proposed system to be able to provide authentication services, confidentiality, integrity services for user or wired/wireless communication devices. And it can be prvented as well to man-in-the-middle attacks.