• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.386-399
• /
• 2023

Microplastics and nanoplastics (NMPs) are considered one of hazardous contaminants in marine ecosystems due to their toxic effects, such as reproduction disorder and oxidative stress, on marine organisms. Although water temperature is rising due to global climate change, little information on the toxicological interaction between NMPs and temperature is available. Therefore, in this study, we confirmed the toxicity of NMPs (polystyrene [PS] beads; 0.05- and 6-㎛) on brackish water fleas (Diaphanosoma celebensis) depending on increased temperature (30℃ and 35℃) at individual and molecular levels. In the chronic toxicity test, the group exposed to high temperatures showed an earlier first reproduction time compared to the normal temperatures group, but it was delayed by co-exposure to NMPs at 35℃. Notably, the total reproduction decreased significantly only after 0.05-㎛ PS beads exposure at 30℃. Interaction analysis showed that first reproduction time, modulation of the antioxidant-related gene (GSTS1), heat shock gene (Hsp70), and ecdysteroid pathway-related genes (EcR_A, EcR_B, and CYP314A1) were closely related to temperature and PS beads size. These results indicate that microplastics have size-dependent toxicity, and their toxicity can be enhanced at high temperatures. In addition, higher temperatures and PS beads exposure may have negative effects on reproduction. This study suggests that various factors such as water temperature should be considered when evaluating the toxicity of microplastics in marine ecosystems, and provides an understanding of the complex toxic interaction between water temperature and microplastics for marine zooplankton.

• The Korean Journal of Quaternary Research
• /
• v.33 no.1_2
• /
• pp.37-48
• /
• 2021

The cold surge is an important extreme weather in East Asia during winter, and is largely affected by behavior of the Siberian high Arctic Oscillation, which represents undulation of large-scale pressure pattern in the Arctic region. Recent studies also revealed that the synoptic low pressure system developing in the eastern boundary of the Asian continent is sensitive to sea surface temperature (SST) and plays an important role in strengthening the cold advection over the Korean Peninsula during cold surges. In this study, we analyzed the Arctic Oscillation affecting the large-scale background of cold surge in East Asia, and the sea surface temperature in the coast of East Asia is examined focusing on its role on synoptic low-inducing cold advection. For the analysis, the days with the bottom 3% of the average daily temperature, measured at five surface stations in Korean Peninsula during 49 years (1969/70-2017/18), were used for the cold surge cases. During the negative phase of the Arctic Oscillation, a strong trough is observed over East Asia, and the inflow of cold air from the polar region is strengthened, which lead to frequent cold surges. In addition, anomalously high SST in the eastern coast of Asia increases sensible and latent heat release from the ocean, therefore, it enlarges the likelihood of synoptic low-inducing extreme cold surges.

• Journal of Venture Innovation
• /
• v.7 no.2
• /
• pp.41-56
• /
• 2024

Recently, generative AI services, including ChatGPT, have garnered significant attention. These services appealed not only to digital natives, such as Generation Z, but also to digital immigrants, including seniors. This study aimed to analyze the factors affecting seniors' behavioral intention of generative AI services. A survey targeting seniors was conducted, resulting in 250 valid responses. The data were analyzed using multiple regression analysis. For this purpose, performance expectancy, effort expectancy, social influence, requisite knowledge, biophysical aging restrictions of seniors based on MATOA (Model for the Adoption of Technology by Older Adults), a research model on technology acceptance by seniors and AI hallucinations of generative AI services were set as independent variables. The empirical results were as follows: performance expectancy and social influence had a significant positive impact on seniors' behavioral intention of generative AI services. Additionally, requisite knowledge positively influenced seniors' behavioral intention of generative AI services, while biophysical aging restrictions had a significant negative effect. However, effort expectancy and AI hallucinations did not show a significant influence on seniors' behavioral intention of generative AI services. The variables were ranked by influence as follows: performance expectancy, social influence, requisite knowledge, and biophysical aging restrictions. Based on these research results, academic and practical implications were presented.

• Journal of Distribution Research
• /
• v.17 no.2
• /
• pp.1-28
• /
• 2012

I. Introduction : The purpose of this study is to test empirically hypothetical causality among constructs used in previous studies to build the model of relational market behavior on customers' participation and consumer-brand relationship after introducing theories of relationship marketing, loyalty program, consumer-brand relationship, customers' participation in service marketing as previous studies with regard to relational market behavior, which Bagozzi(1995) and Peterson(1995) commented on constructs and definition suggested by Sheth and Parvatiyar (1995). For this purpose, loyalty program by the service provider, customers' participation and consumer-brand relationship as preceding variables explain relational market behavior defined by Sheth and Parvatiyar(1995). This study proposes that loyalty program as a tool of relationship marketing will be effective in that consumers' participation in marketing relationship results in a narrow range of choice(Sheth and Parvatiyar, 1995) because consumers think that their participation motive result in benefits(Peterson, 1995). Also, it is proposed that the quality of consumer-brand relationship explain the performance of relationship as well as the intermediary effect because the loyalty program could be evaluated based on relationship with customers. We reviewed the variables with regard to performance of relationship based on relation maintain in marketing literature, and then tested our hypotheses related to several performance variables including loyalty and intention of relation maintain based on the previous studies and constructs(Bendapudi and Berry, 1997 ; Bettencourt, 1997 ; Palmatier, Dant, Grewal and Evans, 2006 ; You Jae Yi and Soo Jin Lee, 2006). II. Study Model : Analyses about hypothetical causality were proceeded. The marketing effect of loyalty program on relational market behavior was empirically tested in study regarding a service provider. The research model in according to the path hypotheses (loyalty program ${\rightarrow}$ customers' participation ${\rightarrow}$ consumer-brand relationship ${\rightarrow}$ relational market behavior and loyalty program ${\rightarrow}$ consumer-brand relationship, and loyalty program ${\rightarrow}$ relational market behavior and customers' participation ${\rightarrow}$ consumer-brand relationship, and customers' participation ${\rightarrow}$ relational market behavior) proceeded as an activity for customer relation management was suggested. The main purpose of study is to see if relational market behavior could be brought as a result of developing relationship between consumers and a corporate into being stronger and more valuable when a corporate or a service provider try aggressively to build the relationship with customers (Bettencourt, 1997; Palmatier, Dant, Grewal and Evans, 2006; Sheth and Parvatiyar, 1995). III. Conclusion : The results of research into the membership fitness club, one of service areas with high level of customer participation (Bitner, Faranda, Hubbert and Zeithaml, 1997; Chase, 1978; Kelley, Donnelly, Jr. and Skinner, 1990) are as follows: First, causalities in according to path hypotheses were tested, after the preceding variables affecting relational market behavior and conceptual frame were suggested. In study, all hypotheses were supported as expected. This result confirms the proposition suggested by Sheth and Parvatiyar(1995), who claimed that intention of consumer and corporate to participate in marketing relationship brings high level of marketing productivity. Also, as a corporate or a service provider try aggressively to build relationship with customers, the relationship between consumers and a corporate can be developed into stronger and more valuable one (Bettencourt, 1997; Palmatier, Dant, Grewal and Evans, 2006). This finding supports the logic of relationship marketing. Second, because the question regarding the path hypothesis of consumer-brand relationship ${\rightarrow}$ relational market behavior are still at issue, the further analyses were conducted. In particular, there existed the mediating effects of consumer-brand relationship toward relational market behavior. Also, multiple regressions were conducted to see if which one strongly influences relational market behavior among specific question items with regard to consumer-brand relationship. As a result, the influence between items composing consumer-brand relationship and ones composing relational market behavior was different. Among items composing consumer-brand relationship, intimacy was an influence of sustaining relationship, word of mouth, and recommendation, intimacy and interdependence were influences of loyalty, intimacy and self-connection were influences of tolerance and advice. Notably, commitment among items measuring consumer-brand relationship had the negative influence with relational market behavior. This means that bringing relational market behavior is not consumer-brand relationship without personal commitment, but effort to build customer relationship like intimacy, interdependence, and self-connection. This finding confirms the results of Breivik and Thorbjornsen(2008). They reported that six variables composing the quality of consumer-brand relationship have higher explanation in regression model directly affecting performance of consumer-brand relationship. As a result of empirical analysis, among the constructs with regard to consumer-brand relationship, intimacy(B=0.512), interdependence(B=0.196), and quality of partner(B=0.153) had the effects on relation maintain. On the contrary, self-connection, love and passion, and commitment had little effect and did not show the statistical significance(p<0.05). On the other hand, intimacy(B=0.668) and interdependence(B=0.181) had the high regression estimates on word of mouth and recommendation. Regarding the effect on loyalty, explanation level of the model was high(R2=0.515), intimacy(0.538), interdependence(0.223), and quality of partner(0.177) showed the statistical significance(p<0.05). Furthermore, intimacy(0.441) had the strong effect as well as self-connection(0.201) and interdependence (0.163) had the effect on tolerance and forgive. And these three variables showed effects even on advice and suggestion, intimacy(0.373), self-connection(0.270), interdependence (0.155) respectively. Third, in study with regard to the positive effect(loyalty program ${\rightarrow}$ customers' participation, loyalty program ${\rightarrow}$ consumer-brand relationship, loyalty program ${\rightarrow}$ relational market behavior, customers' participation ${\rightarrow}$ consumer-brand relationship, customers' participation ${\rightarrow}$ relational market behavior, consumer-brand relationship ${\rightarrow}$ relational market behavior), the path hypothesis of customers' participation ${\rightarrow}$ consumer-brand relationship, was supported. The fact that path hypothesis of customers' participation ${\rightarrow}$ consumer-brand relationship was supported confirms assertion by Bitner(1995), Fournier(1994), Sheth and Parvatiyar(1995) about consumer relationship to participate in marketing relationship.

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.260-265
• /
• 2011

Plantago asiatica L. (P. asiatica) has been used as one of the popular folk medicines in Asia for human health care practices. Various activities of P. asiatica have been reported, such as anti-oxidant, anti-glycation, anti-inflammatory and hepatoprotective activity. Therefore, the potential of P. asiatica to reduce oxidative stress has been studied in several ways for over 20 years, especially at liver and kidney. However no investigation has been reported revealing its protective effect on prostate. Method: Treatment of P. asiatica leaf ethanolic extract (PLE) (1 g/kg body weight (b.w.), 2 g/kg b.w., or 4 g/kg b.w.) were given separately to animals for pretreatment once per day for 7 days, and on the seventh day ferric nitrilotriacetate (Fe-NTA; 0.24 mmol Fe/kg b.w.), which is known as an oxidative stress-inducer at prostate, was administrated by i.p to negative control group. At the end of the study period, dissection was carried out for detecting the prostate protective effect of PLE. Result: Fe-NTA-treated animals produced reactive oxygen species (ROS) resulting in depletion of antioxidant biomaker, such as glutathione (GSH), glutathione reductase (GR), and glutathione s-transferase (GST) and increase of lipid peroxidation in prostate. However, PLE pretreatment resulted in an increase in the GSH, GST and GR levels concentration dependent manner and in an significant decrease in the levels of lipid peroxidation. Conclusion: Our data suggest that PLE may be effective in protecting oxidative stress-induced damage of prostate, and PLE may be an chemopreventive agent against Fe-NTA-mediated prostate oxidative damage.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.13 no.1
• /
• pp.153-162
• /
• 2002

Summary：This study was designed to examine the effect of mother's depressive mood and parenting related attitude on parenting behavior, focusing on the cases having an ADHD child. Method：A total of 82 parents, 31 parents having children with ADHD and 51 normal, were involved in this study. The children of ADHD and normal group were 6-11 years old. ADHD group were diagnosed as attention-deficit hyperactivity disorder by psychiatric doctor and psychological evaluations using DSMIV criteria and the normal group were excluded by using Diagnostic Rating Scale-Parent, Teacher Form. The mothers of both group completed a series of questionnaire about mother's depressive mood and parenting-related attitude. To investigate the relationships between each variables, Student's t-test, correlation, stepwise regression, and hierarchical regression analysis were performed. Result：In correlation analysis, Mothers with an ADHD child were likely to report more coercive parenting behavior, more negative parenting-related attitudes, and depressive mood than normal group. In regression analysis, mother's parenting stress, dysfunctional thoughts, parenting competence, and depressive mood predicted coercive parenting behavior significantly, total explaining 50% of its variance, and especially depressive mood explained 29% of their coercive parenting behavior. These Results indicated that mother's depressive mood accounted for a substantial portion of coercive parenting behavior. Conclusion：These findings suggested that it is significantly important to reduce Mother's depressive mood through dealing with parenting sense of competence and dysfunctional thoughts, so, both parent education program and cognitive-behavioral therapeutic approach are needed to change parent's coercive parenting behavior. Finally, limitation of the present study and suggestions were discussed for further studies.

• Korean Journal of Poultry Science
• /
• v.45 no.3
• /
• pp.183-191
• /
• 2018

The study was conducted to investigate the effect of dietary supplementation of Lactobacillus, medicinal plants extract, and essential oil on laying performance, cecal microflora, relative organic weight, leucocyte profiles in laying hens against Salmonella gallinarum. A total of 100 Hy-Line Brown laying hens of 65 weeks of age were assigned into 5 dietary treatments supplemented with no antibiotic (negative control), antibiotic (positive control), Lactobacillus 0.1% (LB), medicinal plants extract 100 ppm (MPE), herb extract 100 ppm (EO). After 7 days of treatment, the 20 hens in each treatment group were divided into challenge group (n=10) and non-challenge group (n=10) for oral administration of Salmonella gallinarums, and were maintained in the same dietary treatments for two additional weeks. Laying hens were selected 20 by each treatment, splitting up into oral Salmonella group and nontreated group. The feeding trial lasted for one weeks and Salmonella gallinarum was orally administered for two weeks. Egg production, egg weight, egg mass, and feed conversion ratio were calculated and cecal microflora, relative organ, and blood were collected at the end of experiment. Compared with the control, laying hens fed Lactobacillus, medical plant extract, and essential oil were not observed to change of laying performance. Salmonella count increased significantly when Salmonella gallinarum was orally administered (P<0.05) but coliform bacteria and Lactobacillus counts were not affected. The relative organs weight was not different in hens with oral administration of Salmonella gallinarum and also in hens fed Lactobacillus, medical plant extract, and essential oil. H/L ratio was not significantly different, but total leucocyte level was somewhat increased in the treatment with oral administration of Salmonella gallinarum and more leucocyte increased in laying hens fed Lactobacillus, medical plant extract, and essential oil than control.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.527-533
• /
• 2003

This experiment was conducted in 2001 to investigate the effect of four nitrogen levels (0, 5.5, 11, 16.5kg/10a) on the yield and quality of vice especially with respect to eating quality. One early-maturing variety (Daejinbyeo) and two mid-late-maturing varieties (Ilpumbyeo and Chucheongbyeo) were used in this experiment. Rice yields of all varieties were increased by the higher rate of nitrogen application, mainly due to a larger number of panicles per m2. Head rice ratio was reduced significantly with an increased rate of nitrogen, while immature vice ratio was increased significantly. Increasing the nitrogen application rate, a considerable increase of protein content was found in all tested rice varieties. Palatability value of Daejinbyeo and Ilpumbyeo measured by rice taster was not affected by nitrogen application rate ranging from 0 to 11 kg/10a, but it was decreased significantly at the rate of 16.5kg/10a. In contrast, the palatability value of Chucheongbyeo was decreased significantly by increasing nitrogen application at the whole application rate. A positive correlation was found between nitrogen application rate and protein content (r=$0.88^{**}\textrm{-}0.96^{**}$), but head rice (r=$-0.84^{**}$~$-0.91^{**}$) and palatability value (r=$-0.72^{**}$~$-0.85^{**}$) showed a negative correlation with the nitrogen application rate. Regardless of the fact that eleven aroma-active volatile compounds were detected in cooked vice of Chucheongbyeo, it was concluded that the aroma-active volatile compounds of cooked rice was not affected by the different nitrogen application rate. The results of this study showed that the standard nitrogen fertilization rate of 11kg/10a could be appropriate considering both rice yield and palatability.